Urban regeneration is one of the important agendas of Turkey as a developing country. Rapid urbanization problems have been causing vital social and economic problems together with physical and spatial ones especially in big cities of Turkey. Thus, national and local governments handled urban regeneration as a practical method for solution of these problems. However, they unfortunately don’t implement urban regeneration according to its real requirements. Instead, this multi-dimensional and complex process is seen as a pull down and built up operation. Considering this situation and being in awareness of the responsibilities of architects throughout urban regeneration process, the authors think that urban regeneration should be discussed in the scope of architectural education. This paper presents the purpose, the process and the products of an undergraduate architectural design studio that was undertaken at Bursa Uludag University, Faculty of Architecture. The architectural and urban design projects of the students of which aim was to offer a livable and sustainable mixed used living environments are discussed together with their conceptual backgrounds. Putting stress on the differences between theory and practice, the conclusion introduces a critical evaluation of urban regeneration and sustainable housing concepts in Turkey.

Micro-grid and standalone schemes are emerging as a viable mixed source of electricity due to interconnected costly central power plants and associated faults as well as brownouts and blackouts in additions to costly fuels. Micro-Grid (MG) is gaining very importance to avoid or decrease these problems. The objective of this paper is to design an optimal sizing and energy management scheme of an isolated MG. The MG is suggested to supply load located in El-shorouk Academy, Egypt between 30.119 latitudes and 31.605 longitudes. The components of the MG are selected and designed for achieving minimum Total Investment Cost (TIC) with CO2 emissions limitations. This is accomplished by a search and optimization MATLAB code used with Particle Swarm Optimization (PSO) and Genetic Algorithm (GA) techniques. The use of Diesel Generators (DGs) is minimized by limiting the gaseous CO2 emissions as per targeted allowable amount. A comparison is accomplished for investigating the CO2 emissions constraints effects on the TIC in $/year and annual cost of energy in $/kWh. The obtained results verified and demonstrated that the designed MG configuration scheme is able to feed the energy entailed by the suggested load cost effectively and environmental friendly.

Biodiversity in arid urban environments depends upon habitat formation that balances both bioclimatic and biophysical environment needs. There is the potential for urban gardens to establish symbiotic ecosystem services from microhabitat formation that collectively form an assemblage of ecological patches to connect a diverse range of flora and fauna, and establish community driven nursery and seed collection initiatives. This study of urban garden habitats situated within a new urban district of Jeddah Saudi. The analysis concentrates on the ability of garden spatial formations to construct a heterogeneous spatial morphology of sub-patch within the larger urban landscape patch. Patch and subpatch formations are examined based on the criteria of (I) assemblage of the spatial habitat (characterized by shape and spatial organization); (II) integration of spatial, functional and vegetation plantation patterns; (III) connectivity. Findings reveal that garden layout is structured by the integration and layering of plant types to generate cool understory habitat with seedling establishment, and water conservation. Designed layout of the garden as a spatial pattern is augmented with a range of microclimate mediators to dim solar exposure within the plantation habitat. A strong heterogeneity in plant formations and combinations is seen to dominant the garden formations.

Mobility plays an important role in the cities by enabling people to carry out the most varied activities across the territory, as well as to ensure the city fully function. In addition, analogies to the human organism can be made by this urban dynamic, looking for solutions to specific issues. Moreover, this paper has been based by the premise that phenomena and urban elements could be conceptualized, explained and transformed from contemporary and innovative approaches applied in the medical field. For this reason, this paper aims to develop and present a new concept associated with urban mobility, based on the principles of regenerative medicine: the Regenerative Mobility, a concept with disruptive and evolutionary purposes. Furthermore, the structure of this paper is summarized by the introduction which contextualizes the theme, presents and characterizes the techniques used in the research. Additionally, the following chapters explore essential aspects of the city, explaining why it needs a mobility change and new concepts. Therefore, the concept of Regenerative Mobility is presented as a potential of mobility and cities improvement, followed by pragmatic cases, capable of illustrating some of its principles.

The study presents the results of typological analysis and simulation modeling analysis of traditional courtyard residential houses in the cold semi-arid climate of Iran. The purpose of the research has been to analyze and evaluate traditional passive environmental strategies and their elements to provide implications for the design of sustainable residential buildings in contemporary time. Five existing traditional courtyard houses in the city of Tabriz, Iran, are used as case-studies to analyze the typology and the solar zoning conditions and to develop simulation models. The Ecotect simulation program is used to calculate the solar gains of the buildings and to analyze the effectiveness of the natural passive systems along with native design strategies in terms of potential solar gains of main and secondary living spaces. However, in the vernacular, not only the awareness of the climatic and topological considerations is important, but also the values, rituals, and beliefs that shape the design of the dwellings need to be considered. The research is based on the hypothesis that vernacular buildings (courtyard houses) of Iran have been environmentally sustainable structures. However, an important challenge of the study has been to avoid the technological bias and to consider the cultural and social aspects and embodiment of the studied houses, as well. The study also addresses the potential shortcomings that limit the reliability of Iranian vernacular architecture at present in order to arrive at a more holistic understanding of the sustainability of the vernacular architecture in the country.

Energy efficient models have become the path to reduce energy consumption and Greenhouse gas emissions in the built environment in many developed countries. According to the Energy Performance of Buildings Directive (EPBD), new buildings constructed within the European Union (EU) countries are expected to be nearly zero energy buildings (nZEBs) by 2020, while new public buildings are expected to adhere to this target by 2018. The Passivhaus approach has been identified by several researchers as a possible roadmap to achieve nZEBs. The meticulous engineering and high standards of the Passivhaus building fabric, in addition to the high comfort levels, are the main reasons behind the success and widespread of the standard. Recently, in 2013 the Passivhaus principles have been applied to an experimental residential project in the hot and arid climate of Qatar. The project is composed of two identical buildings, one built according to the Passivhaus standard and the other according to normal practices in the country. The thermal performance and comfort levels of both buildings were assessed through dynamic simulation and on-site measurements. Results indicated that at least 50% reduction in annual operational energy, water consumption, and CO2 emissions were achieved in the Passivhaus model in comparison to the standard model. This paper aims to highlight the lessons learned through the Passivhaus project; first by exhibiting the Passivhaus criteria that have been met, second by showcasing the outcomes of the project, and third by displaying the barriers and difficulties that have been associated with building according to the standard in Qatar. Finally, recommendations and general guidelines are suggested towards a possible adoption of the Passivhaus standard in Qatar and the Gulf Cooperation Council (GCC) countries

With the economic growth and increasing requirement of indoor thermal comfort, the load of building sector presents a greater variability.This paper aims at analyzing the energy consumption characteristics and influencing factors of the residential heat pump system. Firstly, we selected residential households as investigated objective in Kitakyushu, Japan, and compared the energy saving performances of heat supply systems between heat pump and natural gas boiler. The results were based on real measured residential load during winter period, and calculated the cost saving performance of residential heat pump system compared with traditional natural gas boiler. We also did a survey of residential occupation behavior for the 12 selected residential customers. The result indicated that there was low relationship between power consumption and occupation hours, and the number of family members had a significant impact on the power consumption. The results indicate that residential heat pump system presented promising energy saving and cost reduction potential.

In Egypt, people are unable to determine the qualities of appropriate residence that achieves quality and occupant satisfaction, and contributes to sustainability of residential conglomerations. In general, developing countries lack housing information which can be used to enhance quality of residence. Also, the methods of assessing and identifying the appropriate criteria for future residence quality remain traditional ones that cannot address the multiple, conflicting, overlapping aspects to reach a good decision. This calls for using the Analytical Network Process (ANP), an effective tool for specifying the relative importance of all factors impacting a specific issue for making an appropriate residential decision. In addition, this method provides results for the decision element impacts network within the decision structure; thus contributing to more understanding of the mechanisms and requirements of residence selection. The proposed decision structure comprises a two-level network: main clusters, main elements, and sub-elements included in the demographic characteristics group, the residence criteria group, the demand parameters group, the supply parameters group, the residence specifications group, and the alternatives group which representing, in total, the decision and specifying the percentage needed for each housing level. Results of the model showed complete capacity in smoothly addressing complexities and overlapping in the decision structure. The decision structure showed that 52% chose luxury residence, 28% chose middle-class residence, and 19.5% chose the economic residence. Mechanisms of decision making were analyzed; particularly in terms of relationship to demographic characteristics and residence specifications. Also, the importance and impact of demand / supply parameters in reaching decision were analyzed.