The word Yoga comes from the Sanskrit word Yuj meaning to yoke, join or unite. It implies joining or integrating all aspects of the individual body with mind, and mind with soul to achieve a balanced and healthy life. Yoga is performed through some specific postures called Asana. Among the eight limbs of Yoga, the yogic technique properly begins at the third limb that is the Asana. Asana means a state in which one can remain physically and mentally steady, calm, quiet and comfortable. Patanjali defines Asana as Sthirasukhatvam in Yogasutra which can be translated as Stable and pleasurable state of body is called Asana. Mayurasana was described as one of the 32 most important Asana in Gheranda Samhita. The name Mayurasana comes from Sanskrit words Mayura meaning peacock and Asana meaning posture. Hence the posture in which the body of the practitioner is shaped like a peacock is called Mayurasana. In this article anatomical structures involved in the ""Mayurasana"" and how this involvement is beneficial in maintaining the health or in management of any disease is explained. Dr. Somlata Jadoun | Dr. Sunil Kumar Yadav Anatomical Explanation of Mayurasana Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29884.pdf Paper Url : https://www.ijtsrd.com/other-scientific-research-area/other/29884/anatomical-explanation-of-%E2%80%9Cmayurasana%E2%80%9D/dr-somlata-jadoun

In this paper, two types of one dimensional discrete time systems are firstly proposed and the chaos behaviors are numerically discussed. Based on the time domain approach, an invariant set and equilibrium points of such discrete time systems are presented. Besides, the stability of equilibrium points will be analyzed in detail. Finally, Lyapunov exponent plots as well as state response and Fourier amplitudes of the proposed discrete time systems are given to verify and demonstrate the chaos behaviors. Yeong-Jeu Sun ""Two Types of Novel Discrete-Time Chaotic Systems"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29853.pdf Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/29853/two-types-of-novel-discrete-time-chaotic-systems/yeong-jeu-sun

Describes the term Internet of Things IoT security architecture based on Software Defined Networking SDN . In this context, building on SDN works with or without infrastructure. This is called the SDN domain. This work describes the mechanics of the proposed architecture and reduces the chances of using SDN to achieve more effective and flexible network security. It outlined the issues associated with current SDN security applications and introduced a new IoT system plan. This document has discussed the management of Internet access for specific networks and monitoring of global traffic. Finally, it describes the choice of architecture for SDN using OpenFlow and discusses the resulting results. M. Silambarasan | B. Michael Vinoline Rinoj | V. Karthik ""A Novel SDN Architecture for IoT Security"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29908.pdf Paper Url : https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/29908/a-novel-sdn-architecture-for-iot-security/m-silambarasan

In this paper, two types of one dimensional discrete time systems are firstly proposed and the chaos behaviors are numerically discussed. Based on the time domain approach, an invariant set and equilibrium points of such discrete time systems are presented. Besides, the stability of equilibrium points will be analyzed in detail. Finally, Lyapunov exponent plots as well as state response and Fourier amplitudes of the proposed discrete time systems are given to verify and demonstrate the chaos behaviors. Yeong-Jeu Sun ""Two Types of Novel Discrete-Time Chaotic Systems"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29853.pdf Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/29853/two-types-of-novel-discrete-time-chaotic-systems/yeong-jeu-sun

This paper proposes to model a voltage sensor based MPPT with voltage reference control technique with a PI controller for the SEPIC converter. The PI controller will minimize the error between the reference voltage VRef generated by the MPPT controller and the panel voltage VPV . Thus, it is an adaptive solution, as if VPV is far from MPP, error will be large and so it will automatically produce large step size D and vice versa. Thus, the MPPT with voltage reference control technique with the association of PI controller can effectively improve the performance of the PV system. The simulations were performed in the environment of MATLAB SIMULINK. Giri Babu | A. Raja Babu ""Control of Stand Alone PV System using Single Voltage Sensor Based MPPT"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29810.pdf Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/29810/control-of-stand-alone-pv-system-using-single-voltage-sensor-based-mppt/giri-babu

In this paper, two types of one dimensional discrete time systems are firstly proposed and the chaos behaviors are numerically discussed. Based on the time domain approach, an invariant set and equilibrium points of such discrete time systems are presented. Besides, the stability of equilibrium points will be analyzed in detail. Finally, Lyapunov exponent plots as well as state response and Fourier amplitudes of the proposed discrete time systems are given to verify and demonstrate the chaos behaviors. Yeong-Jeu Sun ""Two Types of Novel Discrete-Time Chaotic Systems"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29853.pdf Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/29853/two-types-of-novel-discrete-time-chaotic-systems/yeong-jeu-sun

In our engineering system, friction, wear and tribology are not phenomena that most peoples are considering on daily basis. Wear tribological process occurs when two surfaces are in contact and both one are moving relative to each other. The cast iron is widely used in industrial sector. It have high rate of friction. To reduce the friction the various types of coating is analyzed as well as with lubrication the rate of wear decreases. Prof. Matin A. Shaikh | Prof. Ajij A. Shaikh | Prof. Mrs. G. V. Patil ""A Review: Tribological analysis of Cast Iron by Advanced Coating"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29871.pdf Paper Url : https://www.ijtsrd.com/engineering/mechanical-engineering/29871/a-review-tribological-analysis-of-cast-iron-by-advanced-coating/prof-matin-a-shaikh

With development of smart grid technology, power generation and distribution network acts as new brain in this field. In this technology, the network will not only get going to integrated and set communicable all over the country but its demand will be tracked by the control centers in different aspect and at high time the usage of power is going to cost higher than the actual rate with intimation given to the customer through notification via sms or email. Through this research, the designing for Smart Grids was inspected from a logical aspect, monitoring its behavioral, and physical, and must observe the optimal integration of entire system. From the conventional distribution system, we can see the designed for the control of all the constituents as observe to be autonomous with each other. Thus, centralization in control and consolidated functionality are the main challenges discover by the distribution system. To minimize these matter of concern, the term ""distribution system and its responsibilities"" came into effect by using information and communications technology ICT to power the resolution in circulating distribution system. For preparing the outline in this aspect, this paper aims to present a layout in initiating smart grid technology and responsibilities. In contrast we argue to design an interest in the field of Smart Grid. Ashish Gangwar | Sadaf Qasim ""Key Aspect for Approach of Smart Grid Design System"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29840.pdf Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/29840/key-aspect-for-approach-of-smart-grid-design-system/ashish-gangwar

The Internet of Things IoT is viewed as an ecosystem that includes smart objects with sensors, networks, and processing technologies that integrate and work together to provide an environment that provides smart services to end users. IoT brings many benefits to human life through an environment where smart services are provided to use any activity anytime and anywhere. All of these facilities and services are communicated through various applications running in the IoT environment. The most important utility achieved by IoT applications is monitoring and, consequently, rapid decision making for e cliient management. In this paper, we will explore the diversity IoT application domain to understand the various approaches of IoT applications that have recently been proposed based on the systematic literature review SLR method. The purpose of this paper is to analyze and statistically categorize and analyze current research approaches on IoT application approaches published between 2011 and 2018. According to the content of the current study selected, this study will use SLR processes that include general aspects of healthcare, environmental monitoring, smart cities, commercial and industrial testing, and IoT applications. IoT applications are compared to each other according to several technical characteristics, such as quality of service QoS , proposed case studies, and evaluation environments. It describes the results and shortcomings of each study, addresses those weaknesses, and provides tips for highlighting future research and open issues in IoT applications. N. Sathiyanathan | Selvakumar. S | P. Selvaprasanth ""A Brief Study on IoT Applications"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29888.pdf Paper Url : https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/29888/a-brief-study-on-iot-applications/n-sathiyanathan

This paper proposes a method to determine the magnitude and location of load disturbances in multi area power systems via monitoring tie line power flows, implementing demand response regionally. In this work, proposes an intelligent coordination between secondary control and demand response through a supervisory fuzzy PI based coordinator. The simulations were performed in the environment of MATLAB SIMULINK. K. Sumanth Kumar | S. Thirumalaiah ""Load Frequency Control of Three Area Power System using Fuzzy Logic Controller"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29823.pdf Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/29823/load-frequency-control-of-three-area-power-system-using-fuzzy-logic-controller/k-sumanth-kumar

Muscular dystrophy is a genetic disorder characterized by progressive muscle weakness and degeneration. Duchenne muscular dystrophy DMD is the most common X linked disorder muscular dystrophy. It is caused by an absence of the protein named as dystrophin, which helps to keep muscle cells intact. In my research on this topic, I will emphasis on a complete analysis of molecular gene behind muscular dystrophy. According to a survey with few hospitals labs in my region with 40 50 patients, we had identified the ratio of around 90 of male and 10 of the female victim with the muscular dystrophy disorder. The lifespan of people having this disorder decreases unconditionally and it majorly effect the youngsters. Main concern for the treatment methodology or medical interventions are limited to treating symptoms. Nishtaa Modi ""Analyze the Molecular Genetics of a Solitary Causative Genetic Material behind Muscular Dystrophy"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29850.pdf Paper Url : https://www.ijtsrd.com/biological-science/cell-biology/29850/analyze-the-molecular-genetics-of-a-solitary-causative-genetic-material-behind-muscular-dystrophy/nishtaa-modi

The aim of this study was to develop a simple, rapid and sensitive reverse phase high performance liquid chromatography RP HPLC method for quantification of Saxagliptin in pharmaceutical bulk powder. The chromatographic system employs isocratic elution using a Cosmosil C18 250mm x 4.6ID, Particle size 5 micron . Mobile phase consisting of Methanol and water 70 30 set at flow rate 0.8 ml min. The analyte was detected and quantified at 212nm using ultraviolet detector. The method was validated as per ICH guidelines. The standard curve was found to have a linear relationship r2 0.99 over the analytical range of 10 50 µg/ml. For all quality control QC standards in intraday and interday assay, demonstrating the precision and accuracy over the analytical range. Samples were stable during preparation and analysis procedure. Therefore the rapid and sensitive developed method can be used for the routine analysis of Saxagliptin such as dissolution and stability assays of pre and post marketed dosage forms. Dr. Pradnya Lokhande ""Development and Validation of an HPLC Method for the Analysis of Saxagliptin in Bulk Powder"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29748.pdf Paper Url : https://www.ijtsrd.com/chemistry/analytical-chemistry/29748/development-and-validation-of-an-hplc-method-for-the-analysis-of-saxagliptin-in-bulk-powder/dr-pradnya-lokhande

The aim of this work is to assess the degree of customer satisfaction in the banking sector in Mongolia based on customer perceptions of service quality. The questionnaire was personally conducted on a sample of 150 bank customers. This document makes a useful contribution since there are only a few studies devoted to assessing the quality of service in the banking sector of Mongolia. Results based on three different independent variables showed that all of these variables influenced consumer satisfaction in the Mongolian banking sector. Onon Bayarsaihan | Gendendamba Nerguibaatar | Nyamsuren Delgertsogt ""Customer Satisfaction: A Case Study of Mongolia Banking Sector"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29882.pdf Paper Url : https://www.ijtsrd.com/management/management-development/29882/customer-satisfaction-a-case-study-of-mongolia-banking-sector/onon-bayarsaihan

This action research aimed to determine whether a science comic written in Filipino is effective in stimulating scientific mastery of content and conceptual understanding of Grade 11 STEM students A.Y. 2017 2018. This research study made used of both quantitative and qualitative. For quantitative, a randomized pretest posttest control group design was used. Students were randomly selected and assigned to the control and experimental groups. The control group used the comics written in English while the experimental group used comics on the same topic written in Filipino. For qualitative analysis, an interview and journal narrative was used to gather the experiences of the participants of the study about the developed Filipino translated comics. The results revealed that students exposed to comics written in Filipino performed better than those who used the comics in English. They achieved a higher level of mastery of the contents. In terms of conceptual understanding, exposure to the comics in Filipino resulted to improved performance in the test for conceptual understanding. Pretest and posttest scores are positively correlated and mastery of contents is significantly correlated with conceptual understanding. Based on the result of the study, the following are recommended first, a large sample size should be used next time to increase the generalizability of the results. Second, only simple random sampling should be used and that samples should be randomly assigned to treatment groups. Finally, future research should investigate how comics written in Filipino promote conceptual understanding. Ian Ismael E. Marces ""Catalyzing the Scientific Content Mastery and Conceptual Understanding of Grade 11 STEM Students through Filipino Translated Comics in Earth Science"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29572.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/education/29572/catalyzing-the-scientific-content-mastery-and-conceptual-understanding-of-grade-11-stem-students-through-filipino-translated-comics-in-earth-science/ian-ismael-e-marces

Public medical insurance is applied to the genetic testing system of Cancer genomic medicine , which chooses the most appropriate drug from the result of examining the gene mutation of the patients cancer cell. The curtain of cancer genomic medicine era was opened. Healthcare professionals want to understand the possibilities and limitations of testing and to steadily develop this medical technology. The testing equipment are the OncoGuide™ NCC oncopanel system developed by the National Cancer Research Center and the Foundation One CDx produced by Chugai Pharmaceutical Company. In each case, more than 100 types of cancer related gene mutations can be examined at one time. The number of patients eligible for genome medical treatment is estimated to be approximately 26,000 for patients with solid and rare cancers without standard treatment. Until now, it cost several hundred thousand yen for the patient. Patients who are said to have no cure are tested to a small degree, are looking for anti cancer drugs that could be used. With public health insurance, a series of tests cost 560,000 yen, for people under the age of 70 with average income, medical expenses are about 80,000 yen. It will be able to receive examinations widely at less than 200 medical institutions nationwide. This new cancer treatment gives new hope to patients with cancer. However, patients with cancer should not have excessive expectations. It is necessary to keep in mind that there is a limit to clinical cancer treatment. Takuma Hayashi | Takashi Ura | Ikuo Konishi ""Progress of Cancer Precision Medical by Approval of Medical Insurance of Cancer Gene Panel Test"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29914.pdf Paper Url : https://www.ijtsrd.com/medicine/other/29914/progress-of-cancer-precision-medical-by-approval-of-medical-insurance-of-cancer-gene-panel-test/takuma-hayashi

Physichochemical analysis of palm oil purchased from major markets in agbarho, ewhreni, Opete, Ughelli and Unenurhie in Delta state, Nigeria was carried out to determine the level of adulteration and compared with Standard Organization of Nigeria SON for palm oil. Saponification value and peroxide, the pearson s method was adopted, moisture content was determined using the gravimetric method of air oven drying to constant weight at 105oC, free fatty acid method of analysis of the association of analytical chemist was used. Iodine value by Wijs method. Specific gravity was determined using a pycrometer gravimetric method. Viscosity was analyzed by means of Fungilab smart series Rotational Viscometer Version 1.2 at a temperature of 400C by means of a Thermostat. Melting point and Protein content, method of American oil analytical chemist AOCSCc 3 25 method. The analysis of the results obtained showed that the palm oil samples from Unenurhie had the lowest moisture content value of 0.41 .None of the sample fell within SON recommended value of 195 205mg g, these indicating its suitability for soap making. Though, the level of conformity of Unenurhie sample to SON standard was the closest, other samples were still close. Thus, there is likelihood that most of oil sold in the above named markets is not adulterated. Ogwuche C. E | Obruche. E. K Physio-Chemical Analysis of Palm Oils (Elaeis Guineensis), Obtained from Major Markets in Agbarho, Unenurhie, Opete, Ughelli and Evwreni Town, Delta State, Nigeria"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https:/www.ijtsrd.com/papers/ijtsrd29916.pdf Paper Url : https://www.ijtsrd.com/other-scientific-research-area/other/29916/physio-chemical-analysis-of-palm-oils-elaeis-guineensis-obtained-from-major-markets-in-agbarho-unenurhie-opete-ughelli-and-evwreni-town-delta-state-nigeria/ogwuche-c-e

The rapid increase in population, rising burden of noncommunicable chronic diseases such as diabetes and obesity , care costs skyrocketing, and the global shortage of doctors, nurses, and technicians are leading to an increasing demand for resources to support healthcare. These global challenges will seriously affect the healthcare delivery is the US and around the world. The current technological advancements are leading to the emergence of the so called Health 4.0 revolution. Healthcare 4.0 has the potential to enable new healthcare related processes such as home care and personalized treatments and transform them into services. This paper provides an introduction to the emerging area of Healthcare 4.0 and identify its opportunities, benefits, and challenges. Matthew N. O. Sadiku | Adedamola A. Omotoso | Sarhan M. Musa ""Healthcare 4.0: An Introduction"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29791.pdf Paper Url : https://www.ijtsrd.com/engineering/other/29791/healthcare-40-an-introduction/matthew-n-o-sadiku

Fuel cell technology plays an important role now days due to its high efficiency, more reliability and noise less operation. The fuel cell technology is one of the alternative technique for generation of electricity. This paper contains the working principle and operation of fuel cell, development and application status of fuel cell technologies, characteristics and requirements of major fuel cell technologies, applications and advantages, and also comparisions between different fuel cells such as PEMFC, PAFC, MCFC, SOFC are discussed. V. Vyshnavi | V. Divya Sree | E. Praveena ""Fuel Cell Technology for Distributed Generation"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29886.pdf Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/29886/fuel-cell-technology-for-distributed-generation/v-vyshnavi

Agriculture has made an enormous environmental footprint and is making agricultural development risky. Green agriculture uses well developed modern farming and sustainability concepts to improve natural agricultural techniques. It also draws on green technology to enhance farming. This paper provides a brief introduction on green agriculture. Matthew N. O. Sadiku | Adedamola A. Omotoso | Sarhan M. Musa ""Green Agriculture"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29792.pdf Paper Url : https://www.ijtsrd.com/engineering/other/29792/green-agriculture/matthew-n-o-sadiku

3D printing technology forms the basis of corporations prototyping process. 3D printing technology creates 3D physical protypes by solidifying layers of deposited power by using a liquid binder. 3D printing is an versatile process accommodating geometry of varying complexity in hundreds of different applications, and supporting many types of materials. By eliminating production steps and using substantially less material, additive process could be able to reduce waste and save more than 50 of energy compared to todays subtractive manufacturing process and reduce material cost upto 90 . The use of additive manufacturing can potentially benefit a wide range of industries including defence, aerospace, automotive, biomedical, consumer products and metal manufacturing. A leaf spring is a simple form of spring, normally used for the suspension in wheeled cars. Leaf springs are long and narrow plates attached to the body of a trailer that rests above or under trailer s axle. For safe and cozy using, to prevent the street shocks from being transmitted to the car components and to guard the guard the occupants from the road shocks it s miles important to determine the maximum safe strain and deflection. The objective is to find the stresses and deformation in the leaf spring via making use of static load on it. One of a kind of special materials with mechanical properties are taken into consideration for the structural static evaluation. All leaf spring has linear characteristics there is a linear dependence between force and deflection this means that the 3D printed springs could be used as machine elements in different applications. B. Shushma | Ch. Pavan | D. Vikas Reddy | G. Venu Madhav | A. Mukhul Vamshi ""Design and Modelling of a Leaf Spring using 3D Printing Technology"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29589.pdf Paper Url : https://www.ijtsrd.com/engineering/mechanical-engineering/29589/design-and-modelling-of-a-leaf-spring-using-3d-printing-technology/b-shushma

This action research aimed to develop and utilize supplementary enrichment learning materials toward students improved performance in Physics 7 at Mayamot National High School during school year 2016 2017. This study utilized quasi experimental type of research in order to achieve its main objective, which was to develop and utilize supplementary enrichment learning materials toward students improved performance in Physics 7 at Mayamot National High School during school year 2016 2017. Quasi experimental method was utilized by the researcher in determining the impact of the developed supplementary enrichment learning materials in Physics 7 through the results of the pretest and posttest. Based on the findings, the following conclusions are arrived 1 the developed enrichment learning materials are well prepared and are acceptable to the Science teachers and department heads and 2 the developed enrichment learning materials in Physics 7 is effective and has improved the performance of the students in the chosen least mastered topics. From the conclusions of the study, the following recommendations are offered 1 Science teachers should use the developed supplementary enrichment learning materials in teaching the selected least mastered topics 2 The developed supplementary enrichment learning materials should be further evaluated by other researchers for improvement and 3 Science teachers should develop supplementary enrichment learning materials for other least mastered topics. Ian Ismael E. Marces Development and Utilization of Supplementary Enrichment Learning Materials toward Students Improved Performance in Physics 7 Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29907.pdf https://www.ijtsrd.com/humanities-and-the-arts/education/29907/development-and-utilization-of-supplementary-enrichment-learning-materials-toward-students%E2%80%99-improved-performance-in-physics-7/ian-ismael-e-marces

The economy of Mongolia has traditionally been based on agriculture and livestock. But since democratic revolution in 1990, mining sector started to play important role in economy of Mongolia. Even though it contributes to the nations economy remarkably, an array of adverse consequence follows this development particularly ecological imbalance. Thus government of Mongolia decided to bring improvement economy by supporting agriculture industry including cashmere and wool industry. But because of the texture of Mongolian sheep wool, it faces some difficulties to produce large amount of clothes, yet one more alternative is to manufacture quality construction insulation material based on this feature of the wool. And there is potential to sell it on international platform by doing marketing with great promotions. Munkhmandakh Bat-Orgil Defining Competitive Advantage of Mongolian Wool Products Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29895.pdf Paper Url : https://www.ijtsrd.com/economics/market-economy/29895/defining-competitive-advantage-of-mongolian-wool-products/munkhmandakh-bat-orgil

A comprehensive study and an accurate comparison are introduced about what are the integrated features of medium access control protocols for cognitive radio ad hoc wireless networks. This study Also provides comparison of thirty medium access control protocols designs according to the mentioned features. Finally, we evaluate the performance of two systems for medium access control protocols common control multi channels cognitive medium access control protocol and non common control multi channels cognitive medium access control protocol using Network Simulator 2. This study shows the impact of increasing the packet size on the performance metrics such as network throughput and the packet delivery ratio. Simulation results prove that common control multi channels cognitive medium access control protocol outperforms non common control multi channels cognitive medium access control protocol in all aspects of performance metrics with increasing the packet size. Shimaa Abdzaher | Imane Saroit Performance Evaluation: Cognitive Medium Access Control Protocols Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29894.pdf Paper Url : https://www.ijtsrd.com/computer-science/computer-network/29894/performance-evaluation-cognitive-medium-access-control-protocols/shimaa-abdzaher

Elevated water tanks models are designed using STAAD Pro. The columns are taken circular for both tanks and diameter are 300 mm and height is 15 meter. The height of water tank is 4.3 meter and diameter is 8 meter for circular water tanks. Capacity of water stored is 200KL or 200000 liter. These models are analyzed for dead load, water load and seismic load. Dead load was designed according to IS 875 1987 Part 1 and Seismic load was designed using response spectrum method for earthquake zone III of India using IS 1903 2002. For analyzing a elevated water tank one has to consider all the possible loadings and see that the structure is safe against all possible loading conditions. Capacity of the water tank is considered 200000 L. There are several methods for analysis of different frames like finite element method. Two tanks are design for 200KL capacity in circular tank without center column and circular tank with center column. The height is kept same for both water tanks that is 21 m from ground level. Mahesh Kumar Pal | Nitesh Kushwaha Study on Overhead Circular Water Tank using with and with Out Center Column by Staad Pro V8I Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29942.pdf Paper Url : https://www.ijtsrd.com/engineering/civil-engineering/29942/study-on-overhead-circular-water-tank-using-with-and-with-out-center-column-by-staad-pro-v8i/mahesh-kumar-pal

Shape and position of the stomach can vary greatly with or without any physiological disturbances. However some of its rare shapes may result in the formation of volvulus or may increase the risk of gastric ulcer. Variant shapes of the stomach may be of congenital occurrence or are acquired later on in life. Due to the fact that pathologies of stomach are fairly common diseases nowadays, the problem of diseases associated with the shape of stomach is a very topical issue. We report here 2 atypical shapes of stomach during routine dissection for postgraduate studies in Department of Rachana Sharir, SDM College of Ayurveda and Hospital Hassan with 1 case of hourglass stomach and 1 case of retort shape stomach noted. These variations are possibly of congenital origin and may lead to radiological misinterpretations. Dr. Muteeba Naz | Dr. Uma B. Gopal | Dr. Simi C P | Dr. Surendra Chaudhary | Dr. Daiarisa Rymbai An Unusual Shapes of Stomach: Case Report on Hourglass and Retort Shape Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29852.pdf Paper Url : https://www.ijtsrd.com/medicine/ayurvedic/29852/an-unusual-shapes-of-stomach-case-report-on-hourglass-and-retort-shape/dr-muteeba-naz

Now a day the technology is improving day by day. The wired network has been changed to wireless network. There are many advantages of wireless network over wired network. One of the main advantage is we can walk around freely in a network area and accesses internet. Security is one of the challenging issues. Intrusion Detection System is one of the systematic ways to detect malicious node in a mobile ad hoc network MANET and it is driven by battery power. This paper gives a survey on various intrusion detection systems in MANET. Praveen Mourya | Prof. Avinash Sharma Review on Intrusion Detection in MANETs Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29970.pdf Paper Url : https://www.ijtsrd.com/engineering/computer-engineering/29970/review-on-intrusion-detection-in-manets/praveen-mourya

A well organized, well structured and developed financial sector ensures efficient allocation of financial resources and perks up the competitiveness of the private sector, thereby promoting investment and growth in the real sector. The thrust of the development is to improve the regulatory and governance environment and to enhance the ability of bank owners, management and regulators, and the markets themselves to provide for better governance and regulation to achieve the objectives. In this perspective, improvement of the situation of non performing loan is important. A high volume of non performing loan can never be a boon for the economy. Credit to economy is the main source for financial support of business. On the other side, banks have limited investment tools for their deposits. This study present results from an econometric analysis, favorably Random Effect Model, using pooled panel data collected from the central bank of Bangladesh categorizing four sectors of banking based on the pattern of ownership. Based on the analysis of the bank specific microeconomic factors, which are selected on the availability from reliable sources, used as the regressors, it is observed that the liquidity and the management soundness is more significantly affect the Non performing loan NPL in Bangladesh. Therefore, the recommendation is placed towards formulation policy instruments in favor of solvency rather liquidity. In addition to that, the improvement of managerial efficiency must be sought as well. Ratna Biswas | Mohammed Nazrul Islam | Chanu Gopal Ghosh What are the Stimulating Factors Affecting NPL in Banking Sector of Bangladesh? Evidence from Econometric Exercises Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29861.pdf Paper Url : https://www.ijtsrd.com/economics/financial-economics/29861/what-are-the-stimulating-factors-affecting-npl-in-banking-sector-of-bangladesh-evidence-from-econometric-exercises/ratna-biswas

Variations of the liver are mostly encountered related to its shape, number of lobes and the patterns of ligaments attached Variations related to fissures and vascular supplies are less common. An anatomical variation was observed during routine dissection of a 60 year old male cadaver at Department of Rachana Sharir, Sri Dharmasthala Manjunatheshwara College of Ayurveda and Hospital. The fissure for ligamentum teres was incomplete which usually extends from inferior border of liver upto a portahepatis. Foramen was created in the inferior surface of liver near to inferior border between quadrate lobe and left lobe of liver . It was passing through the foramina along a tunnel formed by the bridging of hepatic parenchyma in between quadrate lobe and portahepatis and opened at to left border of portahepatis. As a result of parenchymatous bridging, the fissure was absent and so, there was no demarcation of quadrate lobe from the inferior surface of left lobe. The left lobe was extending beyond the left lateral vertical plane. Awareness of such type of anatomical variation can be utilized by anatomists, embryologists, radiologists and surgeons for academic interest, to avoid possible errors in interpretation and subsequent misdiagnosis, and to assist in planning an appropriate surgical approach that is crucial for determining the patient outcome. Dr. Simi. C. P | Dr. Uma B. Gopal | Dr. SurendraChaudhary | Dr. Muteebanaz | Dr. DaiarisaRymbai | Dr. Manu Krishnan Pons Hepatis of Quadrate Lobe- A Morphogical Variation of Liver Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29870.pdf Paper Url : https://www.ijtsrd.com/medicine/ayurvedic/29870/pons-hepatis-of-quadrate-lobe--a-morphogical-variation-of-liver/dr-simi-c-p

Digital Notice Board is primary thing in any organization, institution or public utility places like bus stop, railway stations, schools, colleges, malls, etc. But sticking multiple notices every day is a hard process. An individual person is needed to take care of these notices. This project is about advanced wireless notice board. The project is built around raspberry pi. Display is obtained on LCD. A wireless fidelity is used for Data transmission. we can add or erase or differ the text according to our need. At transmitter, authorized PC is used for sending notices. At receiving end wireless fidelity is connected to raspberry pi. When an authorized user sends a message that is to be displayed from his system, it is accepted by receiver. Wireless is a popular technology that allows an electronic device to exchange data over a computer network, including high speed wireless connections. The data is received from authenticated user, then it sends the data to raspberry pi. Pragati Gupta | Akash Parida | Akash Naidu | Ashish Maske Research Paper on Digital Notice Board Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29922.pdf Paper Url : https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/29922/research-paper-on-digital-notice-board/pragati-gupta

"Dried neem leaves Azadirachta indica used in vacuum packed dried shark for long term preservation. Neem leaves are natural preservative, which are used for dried Scoliodon laticaudus Indian dog shark in vacuum packed for long term. Fungi growth not produced in four months storage of product. Dodia A. R | Poojaben Tanna | Durga Fofandi Dried shark in vacuum packaging with Neem leaves (Azadirachta indica) for preservation Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29950.pdf Paper Url : https://www.ijtsrd.com/other-scientific-research-area/other/29950/dried-shark-in-vacuum-packaging-with-neem-leaves-azadirachta-indica-for-preservation/dodia-a-r"

The study mainly focus on the GEM traders export activities and the complications faced by them. It also to examine the mind of the respondents and their preferences on ornaments. It implies the perception of the buyer, how do they see the GEM traders. It compiles the different problems faced by the Gem trader, while they go for export to different countries. It helps to identify the consumers from different countries and their preferences. Ms. R. Mahadevi | Mr. A. Vijayakumar | Dr. M. Kanagarathinam | Dr. M. Thillainayaki A Study on Problems Faced by the Gems and Jewels Exporters with Special Reference to Coimbatore City Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29909.pdf Paper Url : https://www.ijtsrd.com/management/business-ethics/29909/a-study-on-problems-faced-by-the-gems-and-jewels-exporters-with-special-reference-to-coimbatore-city/ms-r-mahadevi

The explosive increase and ubiquitous accessibility of visual data on the Web have led to the prosperity of research activity in image search or retrieval. With the ignorance of visual content as a ranking clue, methods with text search techniques for visual retrieval may suffer inconsistency between the text words and visual content. Content based image retrieval CBIR , which makes use of the representation of visual content to identify relevant images, has attracted sustained attention in recent two decades. Such a problem is challenging due to the intention gap and the semantic gap problems. Numerous techniques have been developed for content based image retrieval in the last decade. We conclude with several promising directions for future research. Shivanshu Jaiswal | Dr. Avinash Sharma An Impact on Content Based Image Retrival: A Perspective View Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29969.pdf Paper Url : https://www.ijtsrd.com/engineering/computer-engineering/29969/an-impact-on-content-based-image-retrival-a-perspective-view/shivanshu-jaiswal

Smart technology is an important part of the solution to food challenges. Smart technologies are already being used by urban food projects but the two concepts are not well connected. Smart Food has been introduced as approach to provide a personalized, mobile, on site counseling service for food allergic people. Smart food focuses especially on foods that can be eaten as staples. This paper provides a brief introduction to smart food. Matthew N. O. Sadiku | Tolulope J. Ashaolu | Sarhan M. Musa Smart Food: An Introduction Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29943.pdf Paper Url : https://www.ijtsrd.com/chemistry/food-science/29943/smart-food-an-introduction/matthew-n-o-sadiku

"In this paper a converter called reconfigurable sunlight based converter RSC for photovoltaic PV battery applications is presented, particularl utility scale PV battery application. The fundamental idea of the RSC is to utilize a solitary force transformation framework to perform diverse activity modes, for example, PV to lattice dc to air conditioning , PV to battery dc to dc , battery to matrix dc to air conditioning , and battery PV to network dc to air conditioning for sun powered PV frameworks with vitality stockpiling. This converter arrangement is engaging for PV battery application, since it limits the quantity of change stages, along these lines improving productivity and lessening cost, weight, and volume. The examination of the converter is finished by PI controller and fluffy controller to decide yield voltage, PV current and voltage, battery current and voltages. Improvement of the model and Simulation is finished utilizing MATLAB SIMULINK software. Shalini Sharma | Gaurav Srivastava Analysis of Reconfigurable Solar Converter using MPPT Techniques Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29918.pdf Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/29918/analysis-of-reconfigurable-solar-converter-using-mppt-techniques/shalini-sharma"

The paper examined the impact of temperature and relative humidity escalation on mental health of in patient admitted into Jos Teaching Hospital JUTH Jos, Plateau State, Nigeria. The main independent variables of interest were temperature and relative humidity we also employed two derived parameters heat index and overlapping effect in our analysis in which we used four years 2011 2014 data of psychiatric cases and in patient that were admitted in the hospital, ex post facto research design was adopted for the study. The population of the study comprised 2073 in patient that was admitted in the hospital from the year 2011 2014 was sample used for the study. Data collected were analyzed with used of single regression and multiple regression analysis with complex heat index formula. The study found climate parameters temperature and relative humidity and their counterpart derived parameters heat index and overlapping effect make population vulnerable to the risk of psychiatric cases and do increase the numbers of patient admitted in the JUTH. There were positive association between the numbers of in patient in the JUTH and those parameters with 41 and 38 critical acute psychiatric cases due to overlapping and heat index effect respectively. In other word 79 10.2 of the total 778 numbers of patient traceable to those parameters were in critical acute psychiatric condition. Increase in the relative humidity and overlapping made population more vulnerable to the risk of psychiatric cases with approximately equal strength than the heat index and temperature. But the heat index makes more risk than temperature. The vulnerability of population to psychiatric cases was not equally distributed throughout the year 2011 2014. Population response differently to the impact of each parameter throughout those years considered. The effective strength of relative humidity determines the effective strength of the overlapping effect and the effective strength of temperature determine that of the heat index. Jaiyeola O. Paul | Abdullahi Ayegba | Abimaje Okolo Suleiman The Impact of Temperature and Relative Humidity Elevation on Mental Health of In-Patient Admitted Into Jos Teaching Hospital Jos, Plateau State, Nigeria Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29944.pdf Paper Url : https://www.ijtsrd.com/engineering/aeronautical-engineering/29944/the-impact-of-temperature-and-relative-humidity-elevation-on-mental-health-of-in-patient-admitted-into-jos-teaching-hospital-jos-plateau-state-nigeria/jaiyeola-o-paul

Solar energy is very important means of expanding renewable energy resources. In this paper is described the design and construction of a microcontroller based solar panel tracking system. Solar is a nonconventional source of energy, considering this we have developed solar panels so that we can fulfill our electricity need. But due to revolution of the earth, solar source i.e. sun does not face the panel continuously hence less electricity is produced. The energy panel should face the SUN till it is present in a day. The problem above can be solved by our system by automatic tracking the solar energy. The block diagram below shows system architecture it consist of a LDR sensor senses max solar power which is being given to the Microcontroller through the ADC which digitizes the LDR output. Controller then takes the decision according to then algorithm and tilts the panel towards the direction of the max energy given by LDR with the help of DC Motor . The Motor is used to rotate the LDR to sense the max solar power. A Solar Tracker is basically a device onto which solar panels are fitted which tracks the motion of the sun across the sky ensuring that the maximum amount of sunlight strikes the panels throughout the day. After finding the sunlight, the trackerwill try to navigate through the path ensuring the best sunlight is detected. It is completely automatic and keeps the panel in front of sun until that is visible. Its active sensors constantly monitor the sunlight and rotate the panel towards the direction where the intensity of sunlight is maximum. Residential that uses solar power as their alternative power supply will bring benefits to them. The main objective of this project is to development of an automatic solar tracking system whereby the system will caused solar panels will keep aligned with the Sunlight in order to maximize in harvesting solar power. The system focuses on the controller design whereby it will caused the system is able to tracks the maximum intensity of Sunlight is hit. When the intensity of Sunlight is decreasing, this system automatically changes its direction to get maximum intensity of Sunlight. LDR light detector acts as a sensor is used to trace the coordinate of the Sunlight by detecting brightness level of Sunlight. While to rotate the appropriate position of the panel, a DCgeared motor is used. The system is controlled by two relays as a DC geared motor driver and a microcontroller as a main processor. This project is covered for a single axis and is designed for low power and residential usage applications. From the hardware testing, the system is able to track and follow the Sunlight intensity in order to get maximum solar power at the output regardless motor speed. J. Lavanya | K. Saiswaroop | M. Naveen | K. Vijetha Automatic Solar Tracking System Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29929.pdf Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/29929/automatic-solar-tracking-system/j-lavanya

The teacher is the most important factor in any educational program. He is the backbone of all educational institutions. To become a good teacher, he should have some qualities and to achieve these, professional training is must for every teacher. So, the paper tries to study the overall impact of teacher training programme at elementary stage being organized under DIET and SSA in Tinsukia District, particularly in terms of implementation of new and innovative teaching techniques at classroom level by the teachers after getting trainings. There have been numbers of Teachers Training Programme like in service Teacher Training, Induction Training, Monthly Cluster and Zone Level Teacher Orientation Programme etc. being organized in all districts of Assam, mainly through District Institute of Education and Training DIET under SSA. My study is confined to only 450 TET qualified teachers who are engaging in teacher training which are run by KKHSOU and other 50 teachers who have attended the short term courses of different subjects organized by SSA and DIET. The objective of the Researcher of the present study is to highlight the perception of trained teachers towards the training and effectiveness of teachers training programme at elementary level of Tinsukia District. So, I have visited the training centers and collected the information with face to face interview with the teachers and questionnaire to them and observed the environment of the centre. At last, some suggestions are also given for improvement and smooth functioning of training programme. Mrs. Rekha Moni Baruah Effectiveness of Teachers Training Programme at Elementary Stage: A Case Study on Teachers of Tinsukia District Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29923.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/education/29923/effectiveness-of-teachers-training-programme-at-elementary-stage-a-case-study-on-teachers-of-tinsukia-district/mrs-rekha-moni-baruah

Agricultural productivity has increased substantially in the last half century due in part to the introduction and expanded use of agricultural chemicals. Pesticides continue to be a significant and growing component of modern rice technology. The relative importance of pesticides has increased despite the availability of alternatives to exclusive chemical pest control such as varietal resistance and integrated pest management IPM . The evaluation of toxicological impact of pesticides in the tropical paddy has been evaluated through estimation of chlorophyll content and enzymatic activities peroxidase and polyphenol oxidase . The seedlings are the crucial stage of the plant, so, the experimental study evaluated 14 days old seedlings chlorophyll content and enzymatic activities influenced by different biocides neem oil, carbosulfan and Oxadiargyl . The experimental results found that all concentrations of 0.5, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0 ml l neem oil, carbosulfan and oxadiargyl decreased the percentage of chlorophyll content and enzymatic activities peroxidase and polyphenol oxidase of 14 days old seedlings. Among three biocides, neem oil was found less toxic towards the test cultivar followed by carbosulfan and oxadiargyl. The experimental studies concluded that neem oil is good for pest management. Farmers should be well trained on proper application and implementation of integrated pest management strategies on rice field by which it restore sustainability of ecosystem and increased productivity. Rath B. B. | Adhikary S. P. Impact of Some Biocides on Chlorophyll and Enzymatic Activities of Rice Plants Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29925.pdf Paper Url : https://www.ijtsrd.com/biological-science/botany/29925/impact-of-some-biocides-on-chlorophyll-and-enzymatic-activities-of-rice-plants/rath-b-b

The language of Islamic design springs primarily from shorthand, and geometry which plays a central role. The geometry and calligraphy are based on the rule of the underlying laws proportions . The problem of research related to insert Islamic art in fundamental design subject especially the design of architecture. The research aims to analyze some models of Islamic engineering works. It follows that the Islamic design principles are reflected in geometry and used by designers as the most valuable tool of the design process to produce ordered patterns that govern aesthetic in designed spaces and surfaces. The research consisted of two parts Theoretical in which the collection of Islamic decoration and use in architecture. And Practical in which the analysis of its. The research results are design and construction are used not only by mathematician astronomers but also by designers, where the most striking characteristic of Islamic geometrical patterns is the prominence of star and rosette shapes. Mohammad Abdullah Almandrawy | Eman Sayed Badawy Ahmad Islamic Art and the Identity of the Architecture Fundamental Design Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29932.pdf Paper Url : https://www.ijtsrd.com/engineering/architecture-and-planning/29932/islamic-art-and-the-identity-of-the-architecture-fundamental-design/mohammad-abdullah-almandrawy

By development of automation and technology, life is getting simpler and easier in every scenario. When it comes to our house this concept can be apply incorporated to make it smarter, safer and automated. Internet of thing is a developing network of everyday object from mechanical to consumer goods that can share information and complete the tasks, though we are busy with other activities. Wireless home automation system uses computer or mobile devices to controlling the features and function accordingly, which mean to save the human energy and electric power. This challenges make smart homes extremely vulnerable to different types of security attacks, resulting in IoT based smart homes being insecure. In this project by using Internet of Things IoT we will control the home appliances. K. Dhanusree | S. Karunya | R. Sneha An IoT Based Smart Home Security and Home Automation System Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29990.pdf Paper Url : https://www.ijtsrd.com/computer-science/computer-security/29990/an-iot-based-smart-home-security-and-home-automation-system/k-dhanusree

The present study was intended to find out students perception of home background and the acquisition of English Language in Mbonge Municipality. Specific objectives were to examine how financial status of parent influence English language, investigate how educational level of the parents influence language acquisition, to examine how parent marital status influence English language acquisition and to find out how parenting style affect language acquisition. A descriptive survey research design was used on a sample of sixty 60 students using the simple random sampling technique. A closed ended questionnaire was used for the collection of data. The respondents were required to strongly agree, agree, strongly disagree and disagree to identify student perception of home background and its influence on language acquisition. The data was analyzed using descriptive statistic particularly frequencies, averages and percentages. The findings showed that, financial status of the parents influence English language acquisition, educational level of parents influences language acquisition, marital status of parents influences English language acquisition and parenting style affect language acquisition. It was therefore concluded that students perception of home background influence English language positively in Mbonge municipality. Bongwong Bruno Student Perception of Home Background and the Aquisition of English Language in Mbonge Municipality Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29960.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/education/29960/student-perception-of-home-background-and-the-aquisition-of-english-language-in-mbonge-municipality/bongwong-bruno

In this paper a detailed study is presented on magnetohydrodynamic fluid flows with their basic governing equations. Basic concept of magnetohydrodynamic is discussed in detail. The results of various problems done by researchers are presented and addressed properly. The various applications of magnetohydrodynamic fluid flows have been presented. Dr. Vishal Saxena Study of Magnetohydrodynamic Fluid Flows and Their Applications Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29931.pdf Paper Url : https://www.ijtsrd.com/mathemetics/applied-mathematics/29931/study-of-magnetohydrodynamic-fluid-flows-and-their-applications/dr-vishal-saxena

In this paper a control strategy is proposed for the control of battery supercapacitor based hybrid energy storage system applied to wind PV based hybrid renewable energy system. The hybrid combination of battery supercapacitor provide complement solution for high power and higher energy storage system and thereby covering wide range of applications. The controller is designed based on the variations in the DC link voltage and these variations are suppressed using controller. The proposed controller is tested under two modes of operations surplus power mode and deficit power mode. The power imbalance between supply and demand is minimized using hybrid energy storage system where low frequency components are absorbed by battery and high frequency components are tackeld by supercapacitor. The results show that the proposed control strategy worked satisfactorily for both the case. The results are verified in MATLB Simulink environment. Azhar Lateef Khan Modelling and Control of Wind-PV Based Hybrid Power System Considering Hybrid Energy Storage System Incorporating Battery and Supercapacitor Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29981.pdf Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/29981/modelling-and-control-of-wind-pv-based-hybrid-power-system-considering-hybrid-energy-storage-system-incorporating-battery-and-supercapacitor/azhar-lateef-khan

In this paper a detailed study is presented on magnetohydrodynamic fluid flows with their basic governing equations. Basic concept of magnetohydrodynamic is discussed in detail. The results of various problems done by researchers are presented and addressed properly. The various applications of magnetohydrodynamic fluid flows have been presented. Dr. Vishal Saxena Study of Magnetohydrodynamic Fluid Flows and Their Applications Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29931.pdf Paper Url : https://www.ijtsrd.com/mathemetics/applied-mathematics/29931/study-of-magnetohydrodynamic-fluid-flows-and-their-applications/dr-vishal-saxena

The key purpose of this research was to find out the effectiveness of a modular approach in teaching Chemical Elements and Compounds in order to assess the students learning, and performance. The population was Senior High School Students of Tuyom National High School for the academic year 2018 2019. Sample size has consisted of 48 students. This study has been utilized pre post research design following experimental in nature. The findings of the study revealed that the majority of the respondents were male, ages range from 16 to 17 taking the course Housekeeping under technical vocational strand which most of them were least learners. The findings further surfaced that the scores of the respondents prior to the implementation of the intervention do not significantly differ, however, there was a significant difference after the intervention of the user of the module. Thus, the modular approach is an effective tool for intervention and could help improve the performance of the learners. It is a way of extending help to learners who need immediate intervention. Romelito O. Pantigan Modular Approach in Teaching Chemical Elements and Compounds among Senior High School Students Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29996.pdf Paper Url : https://www.ijtsrd.com/other-scientific-research-area/other/29996/modular-approach-in-teaching-chemical-elements-and-compounds-among-senior-high-school-students/romelito-o-pantigan

Occupational stress can be considered as the damaging physical and emotional response occurring with unmatched potentials, resources and requirements of the professional. Occupational stress may lead to poor health and sometimes even to damages The topic Occupational Stress amongst teaching professionals was chosen with the view of considering the effect of occupational stress amongst teaching professionals of Ranchi District. The other purpose was to find out how they deal with stress particularly in higher educational organisations. 50 faculty members were selected from higher educational institutions. Data was collected by using questionnaire method. The sample was selected through Random Judgemental sampling method. The sample of research study included all teaching positions who were related to teaching with different designation such as lab instructor, lecturer, assistant professors, associate professors, and professors. The responses of respondents were calculated on the basis of various stressors such as total class load, administrative work load, work conditions, class control, relationship with other colleagues, Salary and other benefits, social recognition, lack of infrastructure, time deadlines. This paper aims at studying the various reasons leading to organisational stress amongst the teaching professionals of various universities and colleges of Ranchi district. The parameters for measuring the effects of stress were kept subjective rather than objective. Dr. Puja Mishra Professional Stress amongst Teaching Professionals Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29928.pdf Paper Url : https://www.ijtsrd.com/management/management-development/29928/professional-stress-amongst-teaching-professionals/dr-puja-mishra

At the moment, an attempt has been made to adapt, adapt and automate the Aquaponics System technology for the benefit of farmers and to tackle key issues such as food safety and water scarcity. Aquaponics is a combination of aquaculture, which is growing fish and other aquatic animals, and hydroponics which is growing plants without soil. Aquaponics uses these two in a symbiotic combination in which plants are fed the aquatic animals discharge or waste. In return, the vegetables clean the water that goes back to the fish. Along with the fish and their waste, microbes play an important role to the nutrition of the plants. These beneficial bacteria gather in the spaces between the roots of the plant and converts the fish waste and the solids into substances the plants can use to grow. Aquaponics considered a sustainable production system. It presents a series of beneficial features for the environment such as land conservation, efficient use of water and nutrients, organic fertilization, produce the highest yield on a field, no floor is required, environmental benefits etc. This study describes the overall design and working, list of the component required, cost involved in the setup, maintenance, and operation, advantages and disadvantages of the system. A automatic prototype has also proposed to created a to test the system sustainability. Sanjeev Kumar | Manvendra Singh | Nitika Rai Study of Automated and Controlled Aquaponics System: An Innovative & Integrated Way of Farming Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29945.pdf Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/29945/study-of-automated-and-controlled-aquaponics-system-an-innovative-and-integrated-way-of-farming/sanjeev-kumar

Technology and innovation need to be utilized to help and advance society, not to replace the role of humans. Thus this change is expected to help humans in their daily lives. The characteristics of the two eras are almost the same, including digitalization, optimization and production with customization, automation, interaction between humans and machines, value added services and business, the use of information technology and the wealth of data held. Through the combination and continuity between the industrial revolution 4.0 and society 5.0, it can form a better pattern of social order, so that it can improve the quality of peoples social lives. One of the demands of the industrial phenomenon 4.0 and Society 5.0 is the availability of quality data that is always updated. This paper will discuss in detail the direction of change in corporate life from industry 4.0 to society 5.0., The development of the digital economy and the companys strategy to survive to face the existing changes. Lena Ellitan | Lina Anatan Achieving Business Continuity in Industrial 4.0 and Society 5.0 Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29954.pdf Paper Url : https://www.ijtsrd.com/management/business-policies-and-strategies/29954/achieving-business-continuity-in-industrial-40-and-society-50/lena-ellitan

This paper is written with the sole purpose of providing relevant and efficient information and data to any student who seeks interest in Ackermann Steering System and its mechanism. This paper covers all the components used in the Ackermann Steering mechanisms and detailed discussion and calculations about the same can also be found. Topics include designing of Rack and Pinion, Steering ratio determination, Steering Effort calculation, Kinematic Simulations, Turning radius calculations, Calculating steering angles, Steering column and Arm and Steering System for BAJA vehicle. Piyush Aggarwal | Pravesh Sharma | Prashant Siddhu Ackermann Steering System - A Review Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29911.pdf Paper Url : https://www.ijtsrd.com/engineering/automotive-engineering/29911/ackermann-steering-system-%E2%80%93-a-review/piyush-aggarwal

Against the separation of metaphysics and science advocated for by Plato and his followers and against the rejection of metaphysics in favour of science the Logical Positivists , this work argues that a new link between metaphysics and science is all the more necessary for man to better understand nature. This is precisely what Whiteheads process metaphysics purports to do. But why is a new link necessary It is necessary because Aristotle and his followers already established a link an old link by making metaphysics the foundation of all the sciences. Yet, Aristotelian metaphysics is a substance based metaphysics while Whiteheads metaphysics takes process and especially the category of relation seriously. Whiteheads Process metaphysics prioritizes process over permanence, becoming over being, relation over substance. Why does Whitehead have such preference for process metaphysics over classical metaphysics The answer, as shall be shown in this paper, lies in science with the demise of Newtonian science and the rise of Einsteinian science based on the theory of relativity. In an era when the concept of depassement de la metaphysique has become such a dominant feature of modern and postmodern thought, it is therefore our point of interest to find out why Whitehead who situates himself within this period takes up metaphysics as the foundation of his philosophizing Why does Whitehead embark on reconciling science and metaphysics when all his contemporaries are dissociating themselves from the former These questions will be the main concern of my research in this paper. Nelson Shang Whiteheads Process Metaphysics as a New Link between Science and Metaphysics Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29982.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/education/29982/whitehead%E2%80%99s-process-metaphysics-as-a-new-link-between-science-and-metaphysics/nelson-shang

The basic aim behind our project was to make an environmental friendly portable automobile that would be easy to handle by both the sexes and would emit 0 emission. We have used D.C motor as our main electric source due to which there is no emission at all and also the problem of fuel consumption is solved. Also keeping in mind the parking problems now days, we decided to make a triscooter which can be folded easily, so after the use one can fold the triscooter and can carry it along with him her. Our design allows users to easily transport the triscooter using less space when it is folded into a compact size. We have made this design with our own innovative ideas and by referring some books and websites. Our project is unique and no foldable triscooter is available in Indian market till now. Manisha Bhadade Fabrication of Electric Folding Triscooter/Tricycle Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29940.pdf Paper Url : https://www.ijtsrd.com/engineering/mechanical-engineering/29940/fabrication-of-electric-folding-triscootertricycle/manisha-bhadade

Nowadays storing or retrieving goods from warehouses etc. there is use forklifts extensively. They play a vital role in reducing manual labor to a great extent. It has one shortcoming in the fact that it cannot access small spaces. There is also need skilled personal to operate the vehicle. Apart from these things forklifts also get damaged due to lack of maintenance. The main objective of this magnetic levitating hover board is to access all kinds of spaces inside the workshops and further reduce human effort by using magnetic levitation principle to create a lift to assist in hovering of goods over a copper surface. Hover board is built, which makes it easy to move around heavy objects inside the workshop with minimal effort and more efficiently decreasing the time consumed in the whole process. Electronic speed controller is used to control the rpm of motor which is used to rotate the discs that contain the N52 magnets. Prof. Yogesh Ingulakar | Seshasai Akula | Prithviraj Katariya | Vishal Shende | Wasim Khan Magnetic Levitating Hover Board to Work as a Forklift Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29972.pdf Paper Url : https://www.ijtsrd.com/engineering/mechanical-engineering/29972/magnetic-levitating-hover-board-to-work-as-a-forklift/prof-yogesh-ingulakar

Emotional intelligence is the ability to identify, understand, manage and use emotions in positive ways to relieve from stress, defuse conflict, communicate effectively, empathize with others and overcome challenges. The purpose research attempted to study the comparative Study of Emotional Intelligence among B.A, B. Com and B. Sc. College Students. Objectives 1 To examine the B.A, B. Com and B. Sc. College Students with Emotional Intelligence on dimension self awareness, Empathy, Emotional stability, self motive managing relations, Integrity, Self development. Value orientation, Commitment and Altruistic behavior. Hypotheses 1 There is no significant difference between B.A, B. Com and B. Sc. College Students Emotional Intelligence on dimension self awareness, Empathy, Emotional stability, self motive managing relations, Integrity, Self development. Value orientation, Commitment and Altruistic behavior. Methodology. Sample Total sample of present study 120, in which 40 were B.A. Students, 40 were B. Com. Students and 40 B.Sc. college students. Non Probability Quota Sampling was used. The subject selected in this sample was age group of 18 21 year. Research Design In the present study a balanced 3x2x2 factorial design will be used. Variables The independent variables are Faculty and Dependent variables are Emotional Intelligence. Research Tools Emotional Intelligence scale by Hyde, Pethe, Dhor and Dhar 2002 . Statistical Treatment Mean, SD and F values used. Conclusions 1 B.Com. College Students High Self awareness than B.A. and B.Sc. College Students.2 No significant difference between B.A, B. Com and B. Sc. College Students on Empathy, Self Motivation, Managing Relations, Integrity, Commitment, Emotional Stability and Altruistic Behavior. 3 B.Sc. College Students High Self development, Value orientation and Emotional Intelligence than B.A. and B.Com College Students. Aarti Ramkishan Chauhan A Comparative Study of Emotional Intelligence among B.A, B. Com and B. Sc. College Students Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29915.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/psychology/29915/a-comparative-study-of-emotional-intelligence-among-ba-b-com-and-b-sc-college-students/aarti-ramkishan-chauhan

The research is aimed at finding relationship between two key indicators of identifying the health of any economy namely status of foreign investment and stock market returns. The stock exchange return may be indicated by both benchmark index and market cap. It has been observed that these two go hand in hand with almost perfectly positive correlation. Subsequently the relationship between FDI investment and benchmark stock exchange has been tested in the context of two economies India and Brazil, which are predominantly having strong potential to attract considerable amount of foreign investment. Vector autoregression model VAR has been used to identify the relationship followed by lag order selection and identification of lag length. The bidirectional causality has been tested followed by identifying the variables as block exogenous. Impulse and variance decomposition tests have proved the importance of shock of exogenous factors onto the variables. A detailed case study has been performed for India, where Cointegration test significantly concluded strong interdependence between FDI equity investment , ECB debt investment and benchmark stock index NIFTY 500 . The research has been concluded by developing a forecasting model for the benchmark index based on the values of FDI and its own values with first and second lag orders. Avik Ghosh | Suman Sourav Foreign Investment and its Coherent Relationship with Stock Market Returns: A Cross-Country Study Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29965.pdf Paper Url : https://www.ijtsrd.com/economics/financial-economics/29965/foreign-investment-and-its-coherent-relationship-with-stock-market-returns-a-cross-country-study/avik-ghosh

Rapid Industrialization and urbanization affect the natural system including water. Ajnal river is a small river of Harda M.P. . In the recent decade it was polluted and become a Nalla. Sample was collected from the River Ajnal at three different sites of town Harda in different season. Research work divides on three different season winter, summer and monsoon in the year 2018 to 2019 and analyzed the physicochemical parameters Temperature, transparency, pH, alkalinity, water hardness, DO, etc. average water quality of the river was observed during research work. Suraj Chhipa | Narendra Khore | Dr. Rashida Qureshi Physico-Chemical Parameter of River Ajnal at Harda (M.P.) Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29924.pdf Paper Url : https://www.ijtsrd.com/chemistry/other/29924/physico-chemical-parameter-of-river-ajnal-at-harda-mp/suraj-chhipa

Drought occurrence is caused by the breaking of water balance, which usually leads to negative impact on agriculture, as well as ecological and socio economic spheres. The main purpose of the current study is to conduct drought assessment over Kano State, Nigeria for 2018. We used two different drought indices including Standardized Precipitation Index SPI and the Normalized Difference Vegetation Index NDVI . Meteorological data on precipitation was used to compute the Standardized Precipitation Index, and Normalized Difference Vegetation Index was generated from MODIS NDVI data sets. The conventional SPI classification scheme which categorize drought under seven groups was used along with the NDVI values which ranges from 1 to 1. Results indicate a near normal condition in the study area. Ezekiel. O. Eguaroje | Thomas. U. Omali | Kebiru Umoru Assessment of Drought Occurrence in Kano State, Nigeria Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29976.pdf Paper Url : https://www.ijtsrd.com/other-scientific-research-area/enviormental-science/29976/assessment-of-drought-occurrence-in-kano-state-nigeria/ezekiel-o-eguaroje

"This study presents the heavy metal accumulation profile in Clarias gariepinus catfish exposed to untreated paint effluent. Sub lethal concentrations of paint effluent were used to pollute catfish aquaria. This was followed by isolation and identification of microorganisms from the polluted aquaria after 96 h using conventional microbiological techniques. The tissue heavy metal composition and physicochemical parameters of the aquaria were also monitored using standard analytical methods. Microbial load in the range of 10.00a±2.00 to 189.00d±20.52 cfu ml on tissues of catfish were observed. The heavy metals present in the paint effluent were mainly Lead 1.20±0.01ppm and Zinc 0.34±0.01ppm . No significant difference in the proximate analysis between the tissue of catfish from the control and the polluted aquaria were observed. Catfish tissue accumulated Lead 0.16 ppm from the polluted aquaria. Persistent exposure through pollution by effluent in aquatic environment can lead to increased metallic Lead bioaccumulation that could be unhealthy for both the fish and human consumption. Therefore, indiscriminate discharge of untreated effluent from industrial sites into water bodies should be discouraged. Orimoloye, M. A | Mohammed, A Bioaccumulation of Heavy Metals in Clarias Gariepinus Exposed to Untreated Paint Effluent Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29989.pdf Paper Url : https://www.ijtsrd.com/other-scientific-research-area/other/29989/bioaccumulation-of-heavy-metals-in-clarias-gariepinus-exposed-to-untreated-paint-effluent/orimoloye-m-a"

"The transformer is an essential part of the transmission and appropriation framework. The point of creating, transformer security structure is to oversee in such a manner, that we are utilizing microcontroller and IoT to give programmed security and continuous observing to the transformer. There are numerous flaws happening on a transformer, for example, over voltage, under voltage, extraordinary temperature, and so on. The unit is structured so that it will be good with a wide range of dispersion and force transformer of any appraising. These pack presented sensor, microcontroller, IoT module. To shield the transformer from any cataclysmic disappointment. Also, the framework shows continuous information on the PC at the working station. This framework can use for identifying issues before they happen because of this we can forestall flaws that are expensive to fix and bring about lost assistance. We give an imaginative structure to build up a framework for checking the voltage, current, temperature, and oil parameters of a transformer in a substation or in the field. The proposed structure is produced for the client to effectively perceive the transformer on the off chance that it is endured by any issues and what are the current online parameters. This framework will assist the transformers with operating easily and distinguish issues before any disastrous disappointment. P. A. Werulkar | S. S. Chopade | S. V. Pole Smart Transformer Protection Unit Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29951.pdf Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/29951/smart-transformer-protection-unit/p-a-werulkar"

"The purpose research attempted to study the Study of Self Esteem on Class, Gender and Area of Residence among 10th Class and 12th Class Students. Objectives 1 To Study of Self Esteem on Class, Gender and Area of Residence among 10th Class and 12th Class Students Hypotheses 1 There is no significant difference between 10th Class and 12th Class Students on Self Esteem. 2 There is no significant difference between Male and Female Students on Self Esteem. 3 There is no significant difference between Urban and Rural Students on Self Esteem. Methodology. Sample For the present study 100 samples was selected from Aurangabad district MS . A sample being 100 arts college students selected in this study, in each 50 male students 25 urban and 25rural student and 50 female students 25 urban and 25 rural students . Non Probability Quota Sampling was used. Research Design In the present study a balanced 2x2 factorial design will be used. Variables The independent variables are Gender, Area of Residence and Dependent variables are Self Esteem. Research Tools Ratters Locus of control scale by Anand kumar and srivastava. Statistical Treatment Mean, SD and F values used. Conclusions 1 No significant difference between 10th Class and 12th Class students on Self Esteem. 2 Girls Students high self Esteem than Boys Students. 3 No significant difference between Urban and Rural Students on Self Esteem. Sachin Vasant Sutar A Comparative Study of Self Esteem among 10th Class and 12th Class Students Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29979.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/psychology/29979/a-comparative-study-of-self-esteem-among-10th-class-and-12th-class-students/sachin-vasant-sutar"

Public school education across the world has undergone trends where the school management shifts from centralization and decentralization. This research has focused on a variety of the best strategies and practices of school based management in a global approach. The findings of this study showed that there are different indicators emerged as significant in relation to School based management. These include the effective school leadership, management strategies, faculty development, and stakeholders participation were identified that have huge influence in attaining the overall objectives and aims of school based management. Based on the data gathered, there were no single formula in achieving the overall goal of our school based management, however, there are number of practices that leads to positive and quality educational system these includes effective leadership, management strategies, faculty development and stakeholders participation. Therefore, with these practices, there is a huge probability that a school will likely achieve its goal. Caterina D. Villo | Brenda T. Tabiosa | Ma. Cecilia L. Caballero | Lynne Christine E | Solar, Marilyn M. Miranda | Dr. Luzviminda A. Bonghanoy School Based Management: A 21st Century Approach to School Development Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29995.pdf Paper Url : https://www.ijtsrd.com/other-scientific-research-area/other/29995/school-based-management-a-21st-century-approach-to-school-development/caterina-d-villo

This research article aimed to assess the implementation of Disaster Risk Reduction Education activities and its effects to the lives of the learners in the Philippines during the School Year 2019 2020. The findings revealed that the respondents awareness and knowledge of the practices on what to do before during after disasters like fire, flood, typhoon and earthquake were very much knowledgeable. It also publicized that the level of awareness among respondents on the DRR activities such as lecture and video presentation, picture and story show, drawing and coloring, DRR jingle and Evacuation Drills were very much enhanced. It was concluded that through DRR Education in the Philippines, the learners may be able to easily build their knowledge on various natural disasters and through the use and proper application of DRR activities, their interest and desire will increase in order to take appropriate action for disaster preparedness and mitigation, thus, reducing its risks and impacts. Alvin S. Loremia | Deciery Mae L. Alcover Implementation of Disaster Risk Reduction Education in the Philippines Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29978.pdf Paper Url : https://www.ijtsrd.com/other-scientific-research-area/enviormental-science/29978/implementation-of-disaster-risk-reduction-education-in-the-philippines/alvin-s-loremia

Satellite imagery is important for many applications including disaster response, law enforcement and environmental monitoring etc. These applications require the manual identification of objects in the imagery. Because the geographic area to be covered is very large and the analysts available to conduct the searches are few, thus an automation is required. Yet traditional object detection and classification algorithms are too inaccurate and unreliable to solve the problem. Deep learning is a part of broader family of machine learning methods that have shown promise for the automation of such tasks. It has achieved success in image understanding by means that of convolutional neural networks. The problem of object and facility recognition in satellite imagery is considered. The system consists of an ensemble of convolutional neural networks and additional neural networks that integrate satellite metadata with image features. Roshni Rajendran | Liji Samuel Satellite Image Classification with Deep Learning: Survey Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30031.pdf Paper Url : https://www.ijtsrd.com/engineering/computer-engineering/30031/satellite-image-classification-with-deep-learning-survey/roshni-rajendran

This work includes the effect of different working fluid on the performance of heat exchanger. For analysing the effect of different working fluid, it considered air, water and different nanofluids and measure the Nusselt number and friction factor for each case. It also analysed the effect of change in Reynolds number on the performance of heat exchanger for different working fluids. For analysing the effect of change in Reynolds number, it considered four different Reynolds numbers that is 10000, 12000, 14000 and 16000. For performing the numerical analysis ANSYS fluent was used. Through numerical analysis it is found that for air as a working fluid heat transfer is less, whereas in case of water it is marginally higher than the air. But for all nano fluids, heat transfer is much higher than the air and water. For analysing the effect of different nano fluid, this work includes three nano fluids that are Al2O3, TiO2and ZrO2. Through analysis it is concluded that heat transfer is more in case of TiO2 as compared to other nanofluids, air and water. With increase in Re number heat transfer gets increase whereas as friction factor get decrease. Om Prakash | Pankaj Kumar CFD Analysis for Heat Transfer Enhancement Using Nano-Fluids in Double Pipe Heat Exchanger Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29974.pdf Paper Url : https://www.ijtsrd.com/engineering/mechanical-engineering/29974/cfd-analysis-for-heat-transfer-enhancement-using-nano-fluids-in-double-pipe-heat-exchanger/om-prakash

Culture is the most important for the construction of any society. Social interactions are within the culture is a characteristics feature of any society. cultural and traditional behaviour of the society. Culture gives the social identity for a group of people on which a person can make his individual identity. It is made by the people and it taught for the people. Everybody feel proud of their own culture and traditions. Culture is a base of Society which is combination of customs, rituals, and idea for behaviour, belief, values, attitude and the meaning of behaviour. Culture differs from one another society and community. The present paper attempt to search the different culture and tradition presented in Anita Nairs book Ladies Coupe. This culture which is for the people who construct their identity with him forced to women, lost their identity, freedom and desire. Ladies Coupe is the fine example of the cultural and traditional things which became a mental trauma for the may of characters. Akhila, Marikonathu, Prabha Devi, Janki and Seela are some of characters with which Anita Nair elaborate te victimazation of subordinate and marginal people. Anuradha Ghodke | Dr Vinay D Bhogle Feminine Psyche: Female Perspective in Anita Nairs Mistress Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30039.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/english/30039/feminine-psyche-female-perspective-in-anita-nair%E2%80%99s-%E2%80%98mistress%E2%80%99/anuradha-ghodke

No construction work is possible without bricks because of bricks are used in buildings as well as in pavement. Since many centuries brick making has been practiced by human beings, presently bricks are easily made by the use of the machine but in old days bricks are manufactured by own hand using wooden or steel moulds. For any types of buildings, amajor part of the construction cost is just belongs to bricks work. Bricks walls are not a load bearing elements but they column. Due to high dead weight, the size of the load bearing element needs to be increased which increase the cost of project disasterly thats why in modern engineeringlightweight and low cost building material is needed. In this research work, hypo sludge waste of paper industry and rice husk ash waste from agriculture industry were use. Both the materials are waste product one from paper industries and other from agriculture industry and both cause environmental pollution and disposal problem. Use of such product help to reduce the environmental pollution and they are low cost materials which also helps to keep project cost low. In this research work, hypo sludge is used as cementing material and rice husk ash is used as fine aggregate. In this research work, different variations of hypo sludge and rice husk ash RHA is used for manufacturing bricks sample after that bricks physical properties is compare by ordinary clay bricks, fly ash bricks, and with their different composition. For this research work Dimension Analysis, Initial Rate of Absorption, Compressive Strength Test, Water Absorption Test, Soundness Test, and Efflorescence Test is conducted for the analysis of the physical properties of the bricks. from the analysis by etabs conclusion can be made that bending moments and shear forces are less in structure made up of hypo sludge bricks as compare to conventional structures structure those are made up of either clay bricks or fly ash bricks on every storey of building structure. The weight of a RHA HS Brick is approximately 2.5 to 2.7 kg while clay brick weights approximately 3.0 kg, it causes approximately 13.33 reduction in dead load of structure due to partition walls which on the other hand causes reduction in percentage of steel used in all related load carrying structure section like Beams, Columns, and Footing. Afzal Khan | Nitesh Kushwah Study of Bricks Made Up of Different Materials in Building Construction by eTabs Software Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29984.pdf Paper Url : https://www.ijtsrd.com/engineering/civil-engineering/29984/study-of-bricks-made-up-of-different-materials-in-building-construction-by-etabs-software/afzal-khan

This paper presents the experimental study for comparison of surface roughness of work piece when grinding three types of 3X13, SKD11 and SUJ2 steels with CBN grinding wheel. The comparison methods in this study include comparison by means, comparison by numerical charts, comparison by histogram plot, and comparison by criterias of probability theory. The results show that comparison by criterias of probability theory leads to more reliability than other methods. On this basis, the values of surface roughness of 3X13 and SUJ2 steels are determined to be equal. Meanwhile, the surface roughness of SKD11 steel is much lower than that of the other two steel types. Nguyen Hong Son Comparative Experiment of Surface Roughness when Grinding 3X13, SKD11 and SUJ2 Steels with CBN Grinding Wheel Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29986.pdf Paper Url : https://www.ijtsrd.com/engineering/mechanical-engineering/29986/comparative-experiment-of-surface-roughness-when-grinding-3x13-skd11-and-suj2-steels-with-cbn-grinding-wheel/nguyen-hong-son

In this paper, the author considered a problem Formulation of solutions of a class of standard congruence of higher degree modulo a power of an odd prime integer. It is studied rigorously and the solutions of the congruence are formulated. Illustrating suitable examples, the formula established is tested and verified true. No earlier formulation is found in the literature of mathematics for such congruence. Author has tried his best to find a formula for the solutions of the problem under consideration and succeed. It is the merit of the paper. Prof B M Roy RP-47: Formulation of a Class of Standard Congruence of Higher Degree Modulo a Power of an Odd Prime Integer Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29994.pdf Paper Url : https://www.ijtsrd.com/mathemetics/other/29994/rp-47-formulation-of-a-class-of-standard-congruence-of-higher-degree-modulo-a-power-of-an-odd-prime-integer/prof-b-m-roy

This study aimed at investigating the impact of teachers quality on graduates employability the case of public universities in the North West and South West regions of Cameroon. The purpose of the study was to examine the extent to which lecturers teachers quality affect the quality of training of graduates. The survey research design was adopted for the study. Data was successfully collected from 361 graduates, 385 final year undergraduate students preparing for graduation in 2019 and 56 academic staff. Questionnaire was the instruments used for the study. Instruments consisted of both closed and opened ended items. The reliability statistics for graduates and students from the University of Buea was 0.876 and 0.827 respectively while that for graduates and students from the University of Bamenda was 0.871 and 0.894 respectively. Data from closed ended questions was analysed using SPSS 23.0, with the aid of descriptive and inferential statistical tools while the opened ended questions were analysed thematically. Findings showed that lecturers teachers quality R = 412 , P = 0.000 strongly and significantly affect the quality of training and employability chances of graduates with all P values 0.001, far 0.05. Aside this relationship, a significant proportion of graduates, students and academic staff indicated that not all teachers employed in the University and in their department are qualify to teach. Therefore, it was recommended that adequate measures should be adopted to improve on teachers quality by creating a teacher education center. Nyenty Stephen Atem | Joseph Besong Joseph Teachers Quality and Graduates Employability: The Case of Public Universities in the North West and South West Regions of Cameroon Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30009.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/education/30009/teachers%E2%80%99-quality-and-graduates-employability-the-case-of-public-universities-in-the-north-west-and-south-west-regions-of-cameroon/nyenty-stephen-atem

The Mutiny of 1857 proved to be a land mark in the history of India. This Mutiny ended the companys rule. However, after the war the rule of the British Crown began. Not only common people took part in the Mutiny but also the princes, the Nawabs, the Rajas, the rulers, the Zamindars and even the Sepoys took interest in the Mutiny. During the Mutiny, the last Mughal Emperor Bahadur Shah Zafar 1837 1862 was proclaimed as the Emperor of India. The Mutiny began on 10th May 1857 and then spread like wildfire to different parts of the country. The people and the Sepoys rose to the rebellion against the unlawful activities of the British Govt. By this Article a better understanding about the insurgency of 1857 has been made to know the actual cause behind the Mutiny and to know why the Indians felt dissatisfied with the British Govt. This Article helps us to reconstruct the History of the Mutiny of 1857, to know the nature and background of the Mutiny, the beginning of the Mutiny, the causes of the Mutiny, the spread or the main events of the Mutiny, the failure of the Mutiny and the result or the outcome of the Mutiny of 1857. Adil Firdous Wani The Insurgency of 1857 in British India_The First war of Independence Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30011.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/history/30011/the-insurgency-of-1857-in-british-india_the-first-war-of-independence/adil-firdous-wani

"Present paper represents the bacteriological study of localized skin infection in human. Pathogenic bacteria are causes the various disease including skin disease. Sample was collected from the infected person and pouring on the specific media and observed the bacterial colony after 24 48 hour. Skin disease causing bacteria Staphylococcus, Streptococcus was observed in abundance, Staphylococcus aureus was seen in abundance Streptococcus pyogens was present and Corynebactrerium spp. and cutibacterium acne was seen less abundance. These are responsible for skin infection so proper awareness and antibiotic treatment must be for prevention of the disease. Abhilasha Tank | Anand Verma | Sunil Kumar Bourasi A Bacteriological Study of Localized Skin Infection in Human Beings Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30000.pdf Paper Url : https://www.ijtsrd.com/biological-science/microbiology/30000/a-bacteriological-study-of-localized-skin-infection-in-human-beings/abhilasha-tank"

The retail business or retail trade for furniture products is very dependent on the supply of products offered to consumers in accordance with the consumers choice and purchasing power. Changes in furniture buying behavior is one of the important factors that is a concern for retailers to build their competitive advantage with continuous innovation starting from products, service processes, marketing and management. Competition among furniture retailers, especially traditional retailers is increasingly pushed by the presence of modern retail with the ability to create high buying value to consumers in terms of price, product variants, design and quality. The presence of e commerce that sells furniture products through online, has begun to grow significantly. This paper will discuss more specifically about Furniture Retail Businesses in Indonesia and identify problems faced and various alternative solutions from both theoretical and practical perspectives. Lusy Evylia Puspita | Lena Ellitan Problem Identification and Alternative Solution of Retail Furniture in Indonesia Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29998.pdf Paper Url : https://www.ijtsrd.com/management/retail-management-and-comm/29998/problem-identification-and-alternative-solution-of-retail-furniture-in-indonesia/lusy-evylia-puspita

With cloud storage services, users can remotely store their data to the cloud and realize the data sharing with others. Remote data integrity auditing scheme is proposed to guarantee the integrity of the data stored in the cloud. In some common cloud storage systems such as the Electronic Health Records EHRs system, the cloud file might contain some sensitive information. The sensitive information should not be exposed to others when the cloud file is shared. Encrypting the whole shared file can realize the sensitive information hiding, but will make this shared file unable to be used by others. How to realize data sharing with sensitive information hiding in remote data integrity auditing still has not been explored up to now. In order to address this problem, we propose a remote data integrity auditing scheme that realizes data sharing with sensitive information hiding in this system. Paruvathavarthini M | Prasuna K S | Sermakani. A. M Data Sharing with Sensitive Information Hiding in Data Storage using Cloud Computing Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30007.pdf Paper Url : https://www.ijtsrd.com/engineering/information-technology/30007/data-sharing-with-sensitive-information-hiding-in-data-storage-using-cloud-computing/paruvathavarthini-m

Price is very important in doing business because the price is one of the factors considered by the customer in making a purchase so that businesses must really consider the progress of their business well. If the business actor is wrong in setting the price, it will result in losses to the business so that the business actor will find it difficult to survive with the increasingly high competition in the business world. Besides the price, it is also necessary to carry out quality control or the quality of goods and services offered to customers, especially service goods felt by the buyer. In the development of business activities everywhere, each business actor has their own strategy in order to win the hearts of customers so that these business activities can run for a long time. One business actor in the service sector is the Lady Boss Salon which offers beauty care products to its customers who have graduated at Medan Mega Trade Center Complex MMTC Jalan Pancing Medan. The method used in this research is quantitative with an associative approach. The technique used in this study is probability sampling with a simple random sampling approach of 55 respondents. Data collection was carried out by distributing questionnaires to respondents who are consumers of Lady Boss Salon. The data analysis technique uses validity test, reliability test, classic assumption test, multiple linear regression analysis, t test, F test which is operated through SPSS 16 program. The results of the study explained that the Price Variable X1 affected the Purchasing Decision Y by 10.7 and the Service Quality Variable X2 affected the Purchasing Decision Variable Y by 41.6 and the Price Variable X1 and the Quality Variable Services X2 affect the Purchasing Decision of 55.73 Adiwima Zebua | HD. Melva Sitanggang | Amril Influence of Price and Quality of Service to Purchase Decisions in Salon Lady Boss Medan Mega Trade Center (MMTC) Medan Complex Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29927.pdf Paper Url : https://www.ijtsrd.com/management/marketing/29927/influence-of-price-and-quality-of-service-to-purchase-decisions-in-salon-lady-boss-medan-mega-trade-center-mmtc-medan-complex/adiwima-zebua

The development of information and communication technology has made a shift in consumer shopping behavior from offline stores to online sales in Indonesia, one of which is marked by the growth of online sales that are experiencing a significant increase. one of the factors that influence consumers in buying a product is a marketing system and price perception. If online marketing continues and the price offered is lower than its competitors, consumers will buy more products at the store. Therefore, in this study the authors use online marketing and price perception as independent variables and purchasing decisions as the dependent variable. In this study the method used is a quantitative method with an associative approach. In this research, the population is the consumers of Toko Aidilia Os Medan. The method of sampling in this study used probability sampling techniques with a simple random sampling approach of 60 respondents. Data collection is done by distributing questionnaires to respondents. In this study using data analysis techniques, namely validity test, reliability test, classic assumption test, multiple linear regression analysis, t test, F test, and the coefficient of determination test R2 , which is operated through the SPSS 16 program. The results of the t test study of online marketing variables t value 4.281 t table 2.001 means that online marketing has an influence on purchasing decisions and the perception of price variable t value 5.246 t table 2.001 means that price perception has an effect on purchasing decisions. F test of online marketing variables and price perception F value calculated 29.342 F table 3.23 shows that online marketing and price perception together influence the purchase decision. The coefficient of determination R2 of 0.507 indicates that online marketing variables and price perception affect purchasing decisions by 50.7 and the remaining 49.3 is influenced by other factors not included in this study. The conclusion of the research results shows that online marketing has a significant effect on purchasing decisions and price perceptions have a significant effect on purchasing decisions, Simultaneously online marketing and price perceptions have a significant effect on purchasing decisions. Aidilia Adhami Siregar | Togu Harlen Lbn. Raja | Lasman Eddy Bachtiar The Effect of Online Marketing and Price Perception of Purchase Decisions (Case Study at Medan Aidilia Os Shop) Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29930.pdf Paper Url : https://www.ijtsrd.com/management/marketing/29930/the-effect-of-online-marketing-and-price-perception-of-purchase-decisions-case-study-at-medan-aidilia-os-shop/aidilia-adhami-siregar

Internal combustion engine occupies a significant spot in present day. with the most recent plan alteration in different part being advanced to improve the efficiency and generally speaking performance, one segment has been kept untouched that is camshaft. Cam control the breathing channels of the engine that is the planning of valves through which fuel air mixture enters and fumes is driven out. with help of push rods , rocker arms, stiff springs. With increasing performance demands engine specialists and researchers over the world are perusing radical cam less structure which promises to give ICEs a greater improvement in effectiveness. The fantasy about accomplishing cam less technology is shutting reality at rapid rate. With cam less technology put into practice, the engine power can be improved, pollutant emissions could be controlled and better mileage is acquired, in addition to that the whole mechanism of pulley or belt drive is replaced by the camless engine with greater efficiency than earlier i.e intake and exhaust of the IC engine by camless actuation technology with the camless engine variable valve timing also controls the intake and exhaust gas recirculation. Its one of the major advantage is it offers continously variable and independent control of all types of motion. Priyanshu Kumar Tiwari | Pushkar Verma | Prince Tiwari | Vijay Kumar Gupta Review Paper on New Automotive Camless Engine Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29892.pdf Paper Url : https://www.ijtsrd.com/engineering/automotive-engineering/29892/review-paper-on-new-automotive-camless-engine/priyanshu-kumar-tiwari

In order to compete in the ever growing competent market it is very important for a structural Engineer to save time as well as money, as a sequel to this is an attempt made to analyze and design a INTZE water tank by using IS method and software package of staad.pro. For analyzing a INTZE water tank one has to consider all the possible loadings and see that the structure is safe against all possible loading conditions. STAAD Pro V8i is a comprehensive and integrated finite element Analysis and design offering, including a state of the art user interface, visualization tools, and international design codes. There are several methods for analysis of different frames like finite element method. The present project deals with the design and analysis of a INTZE water tank with 12 lakh liters capacity for Jharkhand. The dead load, live loads and seismic load are applied and the design for different structural component, columns is done by using IS code method and STAAD.Pro with its new features surpassed its predecessors, and competitors with its data sharing capabilities with other major software like AutoCAD, and MS Excel. Intzetank is a type of elevated water tank supported on stagingThere are several methods for analysis of different frames like finite element method.Analysis of results of structural design and estimation of quantities of Intze tank for different wind speed and different bearing capacity of soil, For same bearing capacity of soil, if wind speed is increased the quantity of concrete and steel in Intze type elevated water tank are also increased. For same bearing capacity of soil, if wind speed is increased the quantity of concrete and steel in Intze type elevated water tank are also increased. Keeping the values of bearing capacity of soil constant, for every incremental increase of 10 m sec of wind speed, the quantites of concrete is increased.If the design of intze type elevated water tank is devided into two parts namely super structure above columns and super structure upto columns the analysis of results of this study reveals that with the change in the wind speed and or the bearing capacity of soil, there is an appreciable change is required quantities of concrete and steel for sub structure while these is almost no change in the required quantities of concrete and steel for super structure. Pammy Barnawal | Nitesh Kushwaha Modeling Analysis & Design of Intz Water Tank Considering Different Wind Speed using STAAD PRO V8I Software Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30035.pdf Paper Url : https://www.ijtsrd.com/engineering/civil-engineering/30035/modeling-analysis-and-design-of-intz-water-tank-considering-different-wind-speed-using-staad-pro-v8i-software/pammy-barnawal

The relationship between corporate social responsibility CSR and earnings management EM is an extensive empirical study. However, the evidence on the nature of the relationship is unclear. A commonly defined reason for divergent and contradictory results is measurement issues. The purpose of this article is to evaluate alternative operation and measurement methods applied to the CSR and EM concepts in the empirical literature on CSR EM relationships. Our systematized appraisal was conducted over the last nine years from 2008 to 2016. This study has come to different observations. First, CSR measurement methods include sustainability indexes, content analyzes and single dimensional measurements, while EM measurement methods include discretionary accruals, discretionary loan loss provisions, real earnings management, abnormal earnings management, earnings persistence and earnings smoothing. In addition to the unique drawbacks of the approach, the subjectivity of the researcher and the selection anomalies that may influence the nature of the CSR EM relationships identified in the empirical literature. Finally, possible ways of overcoming these disadvantages are recommended. Mashiur Rahman | Sarah Chowdhury Relationship between Corporate Social Responsibility and Earnings Management: A Systematic Review of Measurement Methods Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29987.pdf Paper Url : https://www.ijtsrd.com/management/business-ethics-and-legal-issues/29987/relationship-between-corporate-social-responsibility-and-earnings-management-a-systematic-review-of-measurement-methods/mashiur-rahman

Labor is a phenomenon that exists in many creatures and unlike other acute and chronic pain, the pain of labor does not correlate with any disease or pathology. The complications of pain are tension and anxiety, prolonged labor, abnormal fetal heart rate, increase the incidence of cesarean delivery and neonates low Apgar score. Acupressure is a non invasive method, which is used to augment labor, provide pain relief, and shorten delivery time. Aim the aim of this literature reviews are evaluate the effectiveness of acupressure on labor pains intensity and duration of labor. Methods A comprehensive search of databases and Internet research engines holding information related to effect of acupressure on duration of labor and intensity of labor pain, Pub Med, Saudi digital library and Google scholar search engine from 2010 to 2016.Results Eight articles were included in this review. Conclusion The acupressure was more effective in initial phase of labor, the effect of the intervention were more visible immediately after the intervention. In addition, the acupressure helps in reducing the perception of pain during the first stage of labour without any side effect on the mother or the foetus. Dr. Hamdia Mohammed Abd ELaziz | Prof. Lamiaa Ahmed Elsayed | Prof. Pushpamala Ramaya Effect of Acupressure on Duration of Labor and Intensity of Labor Pain Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30038.pdf Paper Url : https://www.ijtsrd.com/medicine/nursing/30038/effect-of-acupressure-on-duration-of-labor-and-intensity-of-labor-pain/dr-hamdia-mohammed-abd-elaziz

Culture is the most important for the construction of any society. Social interactions are within the culture is a characteristics feature of any society. Culture gives the social identity for a group of people on which a person can make his individual identity. It is made by the people and it taught for the people. Everybody feel proud of their own culture and traditions. Culture is a base of Society which is combination of customs, rituals, and idea for behaviour, belief, values, attitude and the meaning of behaviour. Culture differs from one another society and community. The present paper attempt to search the different culture and tradition presented in Anita Nairs book Ladies Coupe. This culture which is for the people who construct their identity with him forced to women, lost their identity, freedom and desire. Ladies Coupe is the fine example of the cultural and traditional things which became a mental trauma for the may of characters. Akhila, Marikonathu, Prabha Devi, Janki and Seela are some of characters with which Anita Nair elaborate te victimazation of subordinate and marginal people. Anuradha Ghodke | Dr Vinay D Bhogle Culture and Tradition in Anita Nairs Ladies Coupe Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29957.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/english/29957/culture-and-tradition-in-anita-nair%E2%80%99s-%E2%80%98ladies-coupe%E2%80%99/anuradha-ghodke

"Because inhaling radon and its radioactive decay products causes irradiation of lung tissue, the radon data obtained from houses and workplaces need to be transferred using Wi Fi and the Internet to a database on a radon monitoring server system. To do this, a PIN photodiode radon measuring system was implemented and the ESP8266 Wi Fi module was used for wireless communication. Through some experimental studies, we showed that the data transmission using these Wi Fi modules was very successful. Jun-Yong Kim | Gyu-Sik Kim Implementation of Low-Cost Radon Measuring System for Air Quality Monitoring Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30075.pdf Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/30075/implementation-of-low-cost-radon-measuring-system-for-air-quality-monitoring/jun-yong-kim"

"Service delivery in Nigerias public sector has assumed greater significance given that much is required of the civil service if government is to successfully execute its policies and programmes. However, for effective and efficient service delivery and improved job performance in the public sector, workers need to be appropriately motivated. It is in view of the foregoing that this study was designed to examine the effect of reward on employees performance in Oyo State civil service. The study was anchored on motivational theory of equity which sees performance as consequence of fair treatment of employees. To address the study problems, descriptive survey design was adopted. The population of the study comprises of 7,785 employees of the Ministries, Departments and Agencies MDAs of the Oyo State Civil Service. A sample size 381 was drawn by the use of Talo Yamanes formula of which 200 copies of questionnaires was duly completed and returned and this represents 52.5 response rate. In line with the study objectives, four hypotheses were formulated and tested using simple regression analysis and t test analysis through the use of the 22nd version of SPSS. The findings revealed significant individual and joint effect of financial and non financial rewards on performance. In addition, the study discovered that non financial reward in comparison to financial reward significantly impacted more on performance. In view of the findings, the study recommended that it is high time government knew what propels its workforce to improved productivity. In particular, in service training, merit based promotion, recognition, meritorious service awards, recommendation and other forms on non financial reward were advocated while not forgetting performance based incentives. Esione, Uchechukwu Onyeka | Osita, Fabian Chinedu | Prof. Chigbo D. Ngige Effects of Reward on Performance of Workers in the Nigerian Public Sector Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30043.pdf Paper Url : https://www.ijtsrd.com/management/organizational-behaviour/30043/effects-of-reward-on-performance-of-workers-in-the-nigerian-public-sector/esione-uchechukwu-onyeka"

Nurses play an important role in supporting patients with any illness who often seek information regarding alternative therapy. Within their scope of practice, it is expected that nurses have sufficient knowledge about the safety and effective use of alternative therapies, and positive attitudes toward supporting patients who wish to use such therapies. An alternative therapy refers to the health treatments which go along with the medical care, and it is based on natural and traditional methods. It includes natural therapies, herbal medicines yoga, aromatherapy, batch flower medicines, spiritual therapies etc. They offer people the chance to try therapies outside of their standard medical care. These treatment methods are totally different from allopathic medical practices. An evaluative approach with one group pre test, post test design was used for this study. The study was conducted in selected rural areas of Tamilnadu. The samples comprised of 600 health professionals. Convenient sampling technique was used to select the samples. Data was collected using structured knowledge questionnaire before and after administering the structured health education program. The study proved their knowledge improved remarkably after administering the education. The findings of the study support the need for providing information to improve the knowledge of the health professionals regarding complementary therapies in the perspectives of integrating health care shift towards alternative therapies. So the findings have also proved that the information booklet was effective in terms of gain in knowledge scores. Dr. Pushpamala Ramaiah | Dr. Sahar Mohammed Aly | Dr. Afnan Abdulltif Albokhary Integrative Health Care Shift- Benefits and Challenges among Health Care Professionals Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30044.pdf Paper Url : https://www.ijtsrd.com/medicine/nursing/30044/integrative-health-care-shift--benefits-and-challenges-among-health-care-professionals/dr-pushpamala-ramaiah

The ongoing demands for the extra high voltage boost the need for looking for improving the conventional insulating materials by various modification techniques. Transformer insulating oil based nanofluids NFs is one of these techniques. The present work aims to investigate the dielectric performance of transformer oil based nanofluids and their dependence on the type of nanoparticles. To achieve this, three types of nanoparticles namely Zinc Oxide ZnO as conductive nanoparticle, Titanium Oxide TiO2 as semi conductive nanoparticle and Silicon Dioxide SiO2 as dielectric nanoparticles have been suspended in mineral oil MO at various concentration levels and the dielectric performance was tested by performing experiments such as AC breakdown voltage test, relative permittivity and DC conductivity. Experimental findings reveal that the use of nanofluids technique could improve the efficiency of the dielectric performance of mineral oil. The nanoparticle type and concentration have critical effect on the dielectric performance of prepared samples. For breakdown voltage, it is manifested that, samples prepared with ZnO nanoparticles exhibited the highest percentage of improvement. While for relative permittivity, samples prepared with TiO2 nanoparticles at higher concentrations, showed the highest percentage of improvement. On the other hand, all samples showed higher values in conductivity comparing with bare mineral oil sample. Asmaa Ibrahim | Loai Nasrat | Soliman Eldebeiky Investigation of the Dielectric Performance of Mineral Oil -Based Nanofluids Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29973.pdf Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/29973/investigation-of-the-dielectric-performance-of-mineral-oil-%E2%80%93based-nanofluids/asmaa-ibrahim

Artificial Neural Networks are easy to build and take good care of large amounts of noisy data. They are especially suitable for the solution of nonlinear problems. They work well for problems where domain experts arent available or there are no known rules. Artificial Neural Networks can also be adapted to civil engineering structures and suffer from dynamic effects. Structures around the world were badly damaged by the earthquake. Thus, loss of life and property was experienced. This particularly affected countries on active fault lines. Pre and post earthquake precautions have been developed in the world. For these reasons, it is necessary to determine the dynamic performance of structures in the world. There are several methods to determine dynamic performance. System identification is one of these methods. The mathematical model of the structural system is obtained by system identification method. Artificial Neural Networks ANN is a system identification method. ANN can adapt to their environment, work with incomplete information, make decisions under uncertainties and tolerate errors. Steel Model Bridge was used in this study. The system identification of the steel model bridge with the ANN method of 0.90 was made successfully. As a result of this study, ANN approach can provide a very useful and accurate tool to solve the problem in modal identification studies. Hakan Aydin Obtaining Modal Parameters in Steel Model Bridge by System Identification using Artificial Neural Networks Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30013.pdf Paper Url : https://www.ijtsrd.com/engineering/civil-engineering/30013/obtaining-modal-parameters-in-steel-model-bridge-by-system-identification-using-artificial-neural-networks/hakan-aydin"

Design rules for eccentrically loaded beams with open channel cross sections are not available in Indian code IS 800 2000 general construction in steel code of practice third revision . In this study Indian standard medium weight parallel flange ISMCP 175, ISMCP 200, ISMCP 3000 channel beams are used different span length to section height ratio of the beams is taken. The type of loading and the uniformly distributed load application are limited through the web of the channels. General solutions like Elastic critical moment, Slenderness, Reduction factors and the Ultimate loads are determined by using formula given in ANNEX E CL.8.2.2.1,IS 800 2007 for mono symmetric beams and compared with NEW DESIGN RULE snijder and with Finite Element FE simulations on the basis of a parameteric study using ANSYS software 14.0. It is was noticed that mono symmetric formula in code is giving elastic critical moment results upto 0.3 difference with ANSYS result for slender beams but showing larger difference for stocky beams. As the size of beam is increasing with constant cross section it is resulting in reduction in design capacity. The design curve for channel beam proposed by snijder seems to be a good choice , taking torsional effect into account, but it dosent claim to be correct for beams with a ratio L h 15. The results obtained from the IS code formula is matching with ANSYS results for beams having length to depth ratio between range 20 to 40. Akshay Kumar Rathore | Nitesh Kushwah Simulation Analysis in Lateral Torsional Buckling of Channel Section by Using Ansys Software Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30037.pdf Paper Url : https://www.ijtsrd.com/engineering/civil-engineering/30037/simulation-analysis-in-lateral-torsional-buckling-of-channel-section-by-using-ansys-software/akshay-kumar-rathore

The epistemological problem associated with Karl Paul Feyerabend as a philosopher of Science resides beneath the fact that different critics of his works give divers interpretations of them. His works and the accounts they present have no common structure. This plurality and conflictual interpretations of him makes it difficult, if not impossible to pin him to a particular tradition in the Philosophy of Science. For this reason, while some of his critics consider him to be a relativist, to some, he is a Dadaist, a confusionist and an anarchist, yet others think of Feyerabend as the worst enemy of Science. This diversity of interpretation of Feyerabend, in my opinion, only goes to reassure us of our reading of him. That is, Feyerabend is closely associated with pluralism than anything else. My aim, in this paper is thus propose a thesis and attempt a justification. The thesis is that my reading of Against Method, 1993 and The Tyranny of Science, 2011 , justifies the thesis above. This perspective, unlike the others, is more holistic and inclusive. Without agreeing with his poists about science and its method, I contend that his pluralist claims in the philosophy of science art not hard to find. My examples stem, first, from the diversity of interpretations, and the conflicting views of his critics. Second, I consider the titles of the two works under consideration, to illustrate his criticism of the scientism and Methodism of Modern Science on the one hand, and his defence of plurality of methods and theories. Finally, I conclude that contrarily to critics who label him the worst enemy of science, anarchist or a confusionist, I think that, Feyerabend exaggerated his criticism of Modern Science and his defence of pluralism when he claimed to see no difference between science, myths and religion. However, I go further to contend that this comparison does not eclipse his pluralist position. It rather exaggerates it. That is why I term him, an extreme pluralist to say the least. Nyuykongi John Paul Feyerabend, Pluralism and Progress in Science in Against Method (1993) and the Tyranny of Science (2011) Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30060.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/education/30060/feyerabend-pluralism-and-progress-in-science-in-against-method-1993-and-the-tyranny-of-science-2011/nyuykongi-john-paul

This study intends to broach some core information relating to sustainable small farming which can be a smart tool to eradicate poverty in Bangladesh. Therefore an attempt has been made to scrutinize the key issues and trammel behind of having boomed small farming in Bangladesh. Having said that to get the better picture in this connection, extensive literature reviews have been conducted to find out the most effective way through which the better and sustainable solutions would be disseminated for the betterment and development of our poor and marginal farmers in Bangladesh. Mohammad Rubel | Md. Jahirul Islam Goat Farming: A Tool for Poverty Reduction Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30019.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/social-science/30019/goat-farming-a-tool-for-poverty-reduction/mohammad-rubel

Dhatus are the most stable compound part of the body. Other than these basic units some undefined elements were also mentioned by many Acharyas. These were named as UpDhatus. According to the ancient Ayurvedic text, Dosha, Dhatu and Mala are the basic units of the body. In the digestion of RaktaDhatu Blood Pitta is produced as Mala part discharged part , called as Vaikruta Dosha and UpDhatu Optional tissue are created called as Kandara ligament and Sira veins . Large nerves that extend the inhibition of organs are called Kandara. Kandara can be understood along with the big Mahatya, Mahasnayu and round shape Vrittasnayu . Muscles and Kandara engaged in the treaties of bones are the middle path of diseases. The Peshi, Asthi, Sandhi, Snayu and Kandara can be considered under musculoskeletal components in Ayurveda. They are responsible for movements, supports, stability and protection of the body. Dr. Jyoti Gangwal | Dr. Sanjay Kholiya | Dr. Vikash Bhatnagar Concept of Kandara UpDhatu in Ayurveda Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30061.pdf Paper Url : https://www.ijtsrd.com/medicine/ayurvedic/30061/concept-of-kandara-updhatu-in-ayurveda/dr-jyoti-gangwal

Data analytics is a qualitative and quantitative features and process used to enhance the productivity and business gain. Data is extracted and categories identity analyzes behavior data and patterns according to organization requirement. Analytics is an interpretation and communication of meaningful patterns or summary in data. Data integration is a precursor to data analysis, and data analysis is closed linked to data visualization and data. K. Balaji Kumar | S. Balamanoj | Ashik K. H Data Analytics Features and Concepts Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30062.pdf Paper Url : https://www.ijtsrd.com/computer-science/data-processing/30062/data-analytics-features-and-concepts/k-balaji-kumar

To succeed in a modern digital world, healthcare industry must be data driven. Hospitals and healthcare institutions desire to make their workflows more efficient in order to meet demand. One way they can achieve this is with the help of business intelligence BI software. BI refers to the acquisition, correlation, and transformation of data into insightful and actionable information through analytics. Utilizing a BI software is an indispensable part of the growth process toward becoming data driven. In the modern healthcare environment, almost all BI initiatives will be driven by data analytics. This paper provides a brief examination of the deployment and constraints of business intelligence in healthcare. Matthew N. O. Sadiku | Adedamola Omotoso | Sarhan M. Musa Healthcare Business Intelligence: A Primer Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30041.pdf Paper Url : https://www.ijtsrd.com/engineering/other/30041/healthcare-business-intelligence-a-primer/matthew-n-o-sadiku

"Brain Computer Interface BCI aims at providing an alternate means of communication and control to people with severe cognitive or sensory motor disabilities. Brain Computer Interface in electroencephalogram EEG is of great important but it is challenging to manage the non stationary EEG. EEG signals are more vulnerable to contamination due to noise and artifacts. In our proposed work, we used Cuckoo Search Masking Empirical Mode decomposition to ignore such vulnerable things. Initially, the features of EEG signals are taken such as Energy, AR Coefficients, Morphological features and Fuzzy Approximate Entropy. Then, for Feature extraction method, Masking Empirical Mode Decomposition MEMD is applied to deal with motor imagery MI recognition tasks. The EEG signal is decomposed by MEMD and hybrid features are then extracted from the first two intrinsic mode functions IMFs . After the extracted features, Cuckoo Search algorithm is used to select the significant features. Different weights for the relevance and redundancy in the fitness function of the proposed algorithm are used to further improve their performance in terms of the number of features and the classification accuracy and finally they are fed into Linear Discriminant Analysis for classification. This analysis produces models whose accuracy is as good as more complex method. The results show that our proposed method can achieve the highest accuracy, maximal MI, recall as well as precision for Motor Imagery Recognition tasks. Our proposed method is comparable or superior than existing method. Jaipriya D Motor Imagery Recognition of EEG Signal using Cuckoo-Search Masking Empirical Mode Decomposition Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30020.pdf Paper Url : https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/30020/motor-imagery-recognition-of-eeg-signal-using-cuckoo-search-masking-empirical-mode-decomposition/jaipriya-d"

Solar Thermal Energy STE is a form of energy and a technology for harnessing solar energy to generate thermal energy or electrical energy for industries and to desalinate water and to treat waste water, among other things. Here we demonstrate a floating solar receiver which is capable of generating 1000C steam under ambient air conditions without optical concentration. Here the high temperatures are achieved by using thermal concentration and heat localization. This reduces the convective, conductive and radiative heat losses. This demonstration of a low cost and scalable solar vapour generator holds the promise of significantly for expanding the application domain and reducing the cost of solar thermal systems. G. Krishna Rohith | G. Durga | S. Dhayanandh Bubble Wrap: The Key to a New Floating Solar Thermal System Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30017.pdf Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/30017/bubble-wrap-the-key-to-a-new-floating-solar-thermal-system/g-krishna-rohith

The new millennium is beginning to realize the continual efforts Africa is making in quest for greater connectivity. Internet connectivity is very crucial to make Africa engage competitively in the global economy because we are in an emerging Internet age in which information equals power. This paper presents how the Internet, the Information Superhighway, can help in developing countries in Africa. Matthew N. O. Sadiku | Adedamola A. Omotoso | Sarhan M. Musa Africas Connectivity Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30042.pdf Paper Url : https://www.ijtsrd.com/engineering/civil-engineering/30013/obtaining-modal-parameters-in-steel-model-bridge-by-system-identification-using-artificial-neural-networks/hakan-aydin

Pineapple Ananas Comosus is one of the most important tropical and sub tropical fruit of Bromeliaceae family, cultivated almost one third part of the world. July to September is the main growing season in India and it takes almost 18 24 months to mature for harvesting. The main objective of this paper is to analyse the temporal growth in area, production and productivity or yield of pineapple in India. The data series of spati temporal growth of pineapple is incorporated from 1995 96 to 2015 16. The finding of this paper revealed that the area increased from 71.3 to 109.83 000 hectare , production 1071.32 to 1924.22 000 MT and productivity 15 to 17.52 MT hectare in the last two decades. Over the last twenty years the percentage of growth in area, production and productivity of pineapple are 54.04, 79.36 and 16.8 respectively. The study also revealed that Assam has the largest area under pineapple cultivation, West Bengal is the leading producer and Karnataka is the largest in productivity. The huge variation in productivity of pineapple among different states are mainly because inadequate farm management techniques i.e. less use of chemical fertilizer, pesticides, improper suckers, inadequate knowledge and insufficient use of other input, which are the result of less production and productivity. Parvej Alam | Dr. Tariq M. Usmani | Mohammad Danish Growth of Pineapple Cultivation: A Spatio-Temporal Analysis in India Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30045.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/geography/30045/growth-of-pineapple-cultivation-a-spatio-temporal-analysis-in-india/parvej-alam

Recently, fake news has been incurring many problems to our society. As a result, many researchers have been working on identifying fake news. Most of the fake news detection systems utilize the linguistic feature of the news. However, they have difficulty in sensing highly ambiguous fake news which can be detected only after identifying meaning and latest related information. In this paper, to resolve this problem, we shall present a new Korean fake news detection system using fact DB which is built and updated by humans direct judgement after collecting obvious facts. Our system receives a proposition, and search the semantically related articles from Fact DB in order to verify whether the given proposition is true or not by comparing the proposition with the related articles in fact DB. To achieve this, we utilize a deep learning model, Bidirectional Multi Perspective Matching for Natural Language Sentence BiMPM , which has demonstrated a good performance for the sentence matching task. However, BiMPM has some limitations in that the longer the length of the input sentence is, the lower its performance is, and it has difficulty in making an accurate judgement when an unlearned word or relation between words appear. In order to overcome the limitations, we shall propose a new matching technique which exploits article abstraction as well as entity matching set in addition to BiMPM. In our experiment, we shall show that our system improves the whole performance for fake news detection. Prasanth. K | Praveen. N | Vijay. S | Auxilia Osvin Nancy. V Fake News Detection using Machine Learning Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30014.pdf Paper Url : https://www.ijtsrd.com/engineering/information-technology/30014/fake-news-detection-using-machine-learning/prasanth-k

Satellite imagery is important for many applications including disaster response, law enforcement and environmental monitoring etc. These applications require the manual identification of objects in the imagery. Because the geographic area to be covered is very large and the analysts available to conduct the searches are few, thus an automation is required. Yet traditional object detection and classification algorithms are too inaccurate and unreliable to solve the problem. Deep learning is a part of broader family of machine learning methods that have shown promise for the automation of such tasks. It has achieved success in image understanding by means that of convolutional neural networks. The problem of object and facility recognition in satellite imagery is considered. The system consists of an ensemble of convolutional neural networks and additional neural networks that integrate satellite metadata with image features. Roshni Rajendran | Liji Samuel Satellite Image Classification with Deep Learning: Survey Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30031.pdf Paper Url : https://www.ijtsrd.com/engineering/computer-engineering/30031/satellite-image-classification-with-deep-learning-survey/roshni-rajendran

The aim of the study is to integrate affective attitude in Theory of Planned Behavior TPB to predict tourists revisit intention to UNESCO heritage sites in Melaka. A survey of 238 among international tourist was undertaken in Melaka, Malaysia. PLS SEM was used to assess higher order model of three dimensional affective attitude as well as the measurement model and structural model. Hypothesized relationship between affective attitude, subjective norm, perceived behavioral control and revisit intention were examined. The results indicated that the proposed model had strong predictive ability regarding tourists revisit intention to UNESCO heritage sites. Theoretical and practical implications of the findings are discussed. Abdul Hazif Abdul Hamid | Mohd Rosli Mohamad Validating Theory of Planned Behavior with Formative Affective Attitude to Understand Tourist Revisit Intention Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30059.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/tourism/30059/validating-theory-of-planned-behavior-with-formative-affective-attitude-to-understand-tourist-revisit-intention/abdul-hazif-abdul-hamid

The study was carried out on survey of influence of staffs training and development programme on sustenance of Entrepreneurial Development Training Programme EDTP of Ondo State, Nigeria. Descriptive survey research design was adopted for the study. The study population comprised, personnels of EDTP who had passed through training and development programme, either through the non system or formal system of education. The sample size of the study was sixty 60 respondents, selected through a snow balling sampling technique. A self developed questionnaires by the researchers, entitle Survey of staff training development programme on sustenance of entrepreneurial development and training programme of Ondo State, Nigeria was used to gather data for the study. The instrument was validated by an expert on test and measurement while its reliability was determined through test retest method. 0.68 coefficient reliability was obtained. The research questions formulated for the study were analysed, using descriptive statistics frequency counts, percentages and means . Based on the results of the study, conclusions were made that staffs training and development programme could enhance peronnels performance as well as facilitating effective organization and management of EDTP of Ondo State, Nigeria. Based on the conclusions, recommendations were made that the personnel of EDTP of Ondo State, Nigeria should be encouraged by Ondo State Government being a major provider of the programme in the state. Also, Ondo State Government should endeavour to assist on the financial demand of training and development of the personnel of EDTP of Ondo State, Nigeria etc. Erinsakin, Martins Ojo | Mrs. Obe, Oyedunni Adebunmi | Mrs. Agun, Paulinah Olusola A Survey of Influence of Staffs Training and Development Programme on Sustenance of Entrepreneurial Development Training Programme of Ondo State, Nigeria Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30076.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/education/30076/a-survey-of-influence-of-staff%E2%80%99s-training-and-development-programme-on-sustenance-of-entrepreneurial-development-training-programme-of-ondo-state-nigeria/erinsakin-martins-ojo

A Floor Cleaning Machine which is used indoors on a long corridor, comprising a support frame. On the support frame are installed a rotating cleaning organ at the center of frame which is in contact with the floor, the suction mechanism to pull the dust particles coming in contact with the floor cleaning machine and a motor to draw the cleaning organ in rotation, the rotating cleaning organ comprising a cleaning element made of cloths, which is destined to come into direct contact with the Floor. This machine cleans the floor with all the component which are installed over this machine in a single pass. Usually only a single type of cleaning can be done with a machine but this machine has ability to clean the floor in various ways, vacuum cleaner to suck smaller dust particles, Mop to clean the wet and dry floor and a wiper which slides behind the machine. The machine is provided with wheels which run on a motor so that it can be moved on the floor to be washed. M. Nagakiran | Dr. J. Kannakumar | G. Mallikarjuna Fabrication of Switch Operated Sweeping and Floor Cleaning Machine Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30001.pdf Paper Url : https://www.ijtsrd.com/engineering/mechanical-engineering/30001/fabrication-of-switch-operated-sweeping-and-floor-cleaning-machine/m-nagakiran

This paper focuses on a control scheme of cascaded H bridge scheme implemented in SSSC for enhance the three phase power systems. Cascaded H bridge based SSSC has offer low switching losses and less total harmonics distortion, and reduces the number of circuit components. Each H bridge cell has isolated dc capacitors which is exist balanced capacitor voltages. Since SSSC is often requested to operate under asymmetrical condition by power system faults such as one line grounding or two line short circuit and it can be the control output current almost freely. Cascaded H bridge based SSSC needs wide range of margin of dc voltage for operates in large unbalanced voltage power system. This proposed system focused on to avoids wide range of margin of dc voltage by exclusively using the two methods such has zero sequence voltage and negative sequence current. By this scheme, the SSSC is allowed to operate under asymmetrical condition by power system faults. The validity is examined by digital simulation under one line and two line fault in power system. M. Subalakshmi | A. Rathinam Implementation of Cascaded H-Bridge Control Scheme for SSSC using Zero Sequence Voltage and Negative Sequence Current Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30063.pdf Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/30063/implementation-of-cascaded-h-bridge-control-scheme-for-sssc-using-zero-sequence-voltage-and-negative-sequence-current/m-subalakshmi"

Small and medium sized industry and other manufacturing units in the India have vital contributed to the growth of our country. However, to run these units and for transportation of products more of petroleum fuels have been consumed. To replace the petroleum fuels many researches have been done and biodiesel derived from Jatropha oil has been found one of the suitable candidates. In this study fuel obtained by the pyrolysis of waste tire is blended with jatropha biodiesel and used as test fuel. The fuel B20 80 Jatropha biodiesel 20 tire pyrolysis oil has higher viscosity then diesel which restrict its good performance. The one of the major obstacles of using this as diesel engine fuel is its long term storage issues. It is well known fact that to improve the oxidation stability we need to add some antioxidant. The TPO has some natural antioxidant itself. Further some synthetic antioxidants were added in B20 and oxidation stability was checked. Also, test have been done with B20 in two different conditions i.e. with and without antioxidant. The synthetic antioxidants tert butyl hydroquinone TBHQ , pyrogallol PY and propyl gallate PG has been chosen for this study. The test was conducted in a single cylinder diesel engine of model TAF1. The various performance and emission studies have been conducted, analyzed and presented in this research paper. Danish Siddiqui | Akhlesh Shakya Reduction of Nitric Oxide Emissions from a Direct Injection Diesel Engine Run on Non-Petroleum Fuel Blend using Natural Antioxidant Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30082.pdf Paper Url : https://www.ijtsrd.com/engineering/mechanical-engineering/30082/reduction-of-nitric-oxide-emissions-from-a-direct-injection-diesel-engine-run-on-non-petroleum-fuel-blend-using-natural-antioxidant/danish-siddiqui

Sign Language SL is a medium of communication for physically disabled people. It is a gesture based language for communication of dumb and deaf people. These people communicate by using different actions of hands, where each different action means something. Sign language is the only way of conversation for deaf and dumb people. It is very difficult to understand this language for the common people. Hence sign language recognition has become an important task. There is a necessity for a translator to communicate with the world. Real time translator for sign language provides a medium to communicate with others. Previous methods employs sensor gloves, hat mounted cameras, armband etc. which has wearing difficulties and have noisy behaviour. To alleviate this problem, a real time gesture recognition system using Deep Learning DL is proposed. It enables to achieve improvements on the gesture recognition performance. Jeni Moni | Anju J Prakash A Deep Neural Framework for Continuous Sign Language Recognition by Iterative Training: Survey Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30032.pdf Paper Url : https://www.ijtsrd.com/engineering/computer-engineering/30032/a-deep-neural-framework-for-continuous-sign-language-recognition-by-iterative-training-survey/jeni-moni

The position of farmers in India is becoming questionable as the time is passing by. India is developing in all the aspects but there is no significant decline in the suicides committed by the farmers in the country. The real heroes of our nation that are farmers and soldiers are now been forgotten and the fake heroes of the bollywood are now been worshipped. If the prices of agricultural commodities increase, everyone starts complaining but no one bothers about spending so much on branded clothes and watching movies in the theatres. The paper focuses on the reasons behind the farmers of India are committing suicide and some of the steps that should be taken by the government in order to minimize the cases of farmer suicide. The government has made it a political issue rather than an issue worth considering. It also focuses on advantages of agriculture in a developing nation like India and its contribution to the economic growth of our country. Vayu Tewari Farmers Suicide in India Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29977.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/social-science/29977/farmers%E2%80%99-suicide-in-india/vayu-tewari

Self driving cars has the potential to revolutionize urban mobility by providing sustainable, safe, and convenient and congestion free transportability. Autonomous driving vehicles have become a trend in the vehicle industry. Many driver assistance systems DAS have been presented to support these automatic cars. This vehicle autonomy as an application of AI has several challenges like infallibly recognizing traffic lights, signs, unclear lane markings, pedestrians, etc. These problems can be overcome by using the technological development in the fields of Deep Learning, Computer Vision due to availability of Graphical Processing Units GPU and cloud platform. By using deep learning, a deep neural network based model is proposed for reliable detection and recognition of traffic lights TL . Aswathy Madhu | Sruthy S Traffic Light Detection and Recognition for Self Driving Cars using Deep Learning: Survey Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30030.pdf Paper Url : https://www.ijtsrd.com/engineering/computer-engineering/30030/traffic-light-detection-and-recognition-for-self-driving-cars-using-deep-learning-survey/aswathy-madhu

In this paper, we propose the model for predicting radon concentration after 24 hours using multiple linear regression analysis. If the proposed predictive model predicts the concentration of radon after 24 hours, simple methods such as using a ventilator or opening a window can greatly reduce the concentration of radon that can be exposed. Deog-Gyeong Yoon | Jai-Won Chung | Tae-In Hyon | Gyu-Sik Kim Prediction of Radon Concentration after 24 Hours using Multiple Linear Regression Analysis Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30092.pdf Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/30092/prediction-of-radon-concentration-after-24-hours-using-multiple-linear-regression-analysis/deog-gyeong-yoon

In this paper, we propose the model for predicting radon concentration after 24 hours using multiple linear regression analysis. If the proposed predictive model predicts the concentration of radon after 24 hours, simple methods such as using a ventilator or opening a window can greatly reduce the concentration of radon that can be exposed. Deog-Gyeong Yoon | Jai-Won Chung | Tae-In Hyon | Gyu-Sik Kim Prediction of Radon Concentration after 24 Hours using Multiple Linear Regression Analysis Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30092.pdf Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/30092/prediction-of-radon-concentration-after-24-hours-using-multiple-linear-regression-analysis/deog-gyeong-yoon

The short story Subachani by Bhagiratha mishra is about an old lady in her 60s composing and singing scurrilous poems to raise emotional sentiments of wrong doers, residing in villages off the outskirts of Birbhum district in West Bengal. She was hired by people and politicians to bring ill fame to people committing wrong, or even as a broker to buy and sell goods or animals as a common trade practice.The present research work is highlighted as a Case Analysis of the various tasks being rendered by an old tribal lady, whose attributes as a Rural Manager is highlighted in this work. Rajarshi Mukherjee A Managerial Insight into Selected Short Stories in Bengali Literature: A Case Analysis of Subachani by Bhagiratha Mishra Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30101.pdf Paper Url : https://www.ijtsrd.com/other-scientific-research-area/literature/30101/a-managerial-insight-into-selected-short-stories-in-bengali-literature-a-case-analysis-of-%E2%80%9Csubachani%E2%80%9D-by-bhagiratha-mishra/rajarshi-mukherjee

The wave of Arab Spring which started from Tunisia at the ending of 2010, by a young graduate and vegetable vender, and after setting himself on the fire due to harassment and insult by a police women, after suicide by the young vegetable vender theres people began the protest against the government and their officials, then soon after this protest transformed as a heavy conflict between Tunisian people and government. And further this conflict followed by Egypt. Soon after this wave sparked in the whole Arab countries as major or minor like Libya, Syria, Yemen Lebanon, Morocco, Jordon and etc. This Uprising wave developed in some countries as the civil war like Libya, Yemen and Syria. The Civil war in Libya and Syria which started after suppression to the demonstrators by the governments and their security forces in both countries. Similarly the foreign interventions are also caused to develop and transfer the Arab Uprising towards the civil war in the above countries. This civil war is caused a lot of losses and human crisis in both countries as well as it caused to flee from their homes in other places in same country or neighbour countries. This civil war resulted as hundreds of thousands death from both sides, the supporters of the governments and their rivals, and similarly resulted as millions of peoples migration. The main objective of this paper is to analyse the situation of both countries as well as to know the causes of the war and its result in both countries. The methodology is adopted in the present paper is qualitative. Izhar Ahmad Civil War in Syria and Libya after Arab Spring Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30093.pdf Paper Url : https://www.ijtsrd.com/other-scientific-research-area/other/30093/civil-war-in-syria-and-libya-after-arab-spring/izhar-ahmad

This Paper has been made in order to examine the potential of natural resources of Bhaderwah. India is a country with diverse of natural resources. It has plenty of water. Neeru Nallha is the main source of water in Bhaderwah it covers nearly about 1.83 square kilometer area. It is also rich in several natural resources. Bhaderwah is the backbone of the timber industry of J and K as it is well developed in forest. It also plays an important role in the economy of Bhaderwah. These gifts of nature are known as natural resources.Remote sensing and GIS techniques have been used to demarcate the areaunder various natural resources. Satellite data have been extracted from different sites which are useful in mapping and quantifying the extent of natural resources of Bhaderwah. The slope map of the study area is generated through Digital Elevation Model DEM . The DEM generate from the digitized topographic contour which can be used through GIS to extract slope morphology.In this study Geographical information system GIS and different satellitesimages have been used to extract the natural resources area which is useful forfuture planning. Geographical information system GIS helps a lot in monitoring the area of these natural resources as compared to convectional techniques. Mr. Nazim Tariq Mapping of Natural Resources and Creation of Database of Natural Resources of Bhaderwah, Doda, Jammu and Kashmir Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30102.pdf Paper Url : https://www.ijtsrd.com/other-scientific-research-area/geology/30102/mapping-of-natural-resources-and-creation-of-database-of-natural-resources-of-bhaderwah-doda-jammu-and-kashmir/mr-nazim-tariq

The most common hazard in forest fire Accident are themselves destroy the forest and great threat for wildlife and peoples. The number of trees has reduced drastically so the forest are creates an unhealthy environment for animals to survive in the forest. Forest covers 31 of the world and 21 of the India. It has found in a survey that 80 of losses are caused due to fire. This project of a system fire was detected early stages. It was tracking and alarming for protection of trees against forest fire. Now IOT Internet of things devices and cloud based to forest fire alerting system. If cloud can used to storing the information of data to monitoring the different environmental variables such as temperature, smoke, moisture of the forest. So finally to prevent the fire to spread over a huge area and precaution the forest. Ajith. S | Chandru. S | Boopalan. E | Periyathambi. P Cloud Based Forest Fire Alert System using IoT Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30070.pdf Paper Url : https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/30070/cloud-based-forest-fire-alert-system-using-iot/ajith-s

This study examines environmental factors and Nigerian manufacturing shareholders wealth , which has been a great concern among the shareholders when evaluating returns on their investments, this study covers 20 year period, secondary data sourced from CBN and the financial statements of the companies were used, while Unit roots were applied to test non stationarity among the variables and ARDL was used to test for long run relationship among the variables used, the result findings from the data analyzed have positive relationship with manufacturing sectors growth the finding gave affirmation that environment bank loans, foreign exchange rate and energy have impacted on manufacturing performance efficiency reducing their revenues generation ,the study recommends among other things that the management should put more efforts regularly Strategy on environmental analysis in order to minimize the resultant effect. Inflation and economic openness can improve manufacturing earnings per share if manufacturing production for export is enhanced Ojomolade Dele Jacob | Olaleye John Olatunde Environmental Factors and the Manufacturing Sector Shareholders Wealth in Nigeria Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29700.pdf Paper Url : https://www.ijtsrd.com/management/business-environment/29700/environmental-factors-and-the-manufacturing-sector-shareholders%E2%80%99-wealth-in-nigeria/ojomolade-dele-jacob

In thermal power plant coal is being burnt and residue is left as ash. This ash is classified as bottom ash and fly ash. The ash generated below the furnace of thermal power plant is bottom ash which is around 20 of total ash and rest of 80 is fly ash. Bottom Ash is a coarse component of coal burnt ash and is not as useful as fly ash, because bottom ash remains toxic when recycled. But the fly ash when recycled, renders the toxic material and makes it safe for use. Fly Ash is a residue of coal combustion which is obtained from the coal based thermal power plant. It has been observed that the quality of ash produced is extremely good. They are fineness having low unburnt carbon and have high pozzolanic activity. It can be use as Pozzolana in manufacturing of building products like fly ash based bricks, cement, tiles, etc. It has advantage in agricultural industry as well as in the roads and embankment construction. The ash is a commodity that could help the company for producing wealth in long run if utilized in right direction. Fly ash is also considered as resource materials and the considerable amount of minerals can be extracted from it. This paper presents review on utilization of fly ash, that how it can be utilized in different applications, their properties and if proper utilization and disposal is not done, how it can affect our environment and life. Kanak Sharma | Harshit Nishad | Ketan Chakarvarty | Prof. Yogesh Chandra Recent Trends for Ash Disposal and Utilisation Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30056.pdf Paper Url : https://www.ijtsrd.com/engineering/mechanical-engineering/30056/recent-trends-for-ash-disposal-and-utilisation/kanak-sharma

In India, transportation through bridges plays a major role in channelizing the socio economic development. In the present paper, real case study has been considered for the construction of Railway over Bridge over Milan subway at Santacruz joining Western express Highway and SV Road Santacruz, with the sole aim to understand project management, micro planning, machinery and equipment required for the launching of girders by Cantilever Incremental Launching method. It is proved that the bridge construction by this method results in lesser consumption in time and economical for large projects. Manish Kotpalliwar | Nitesh Kushwaha Incremental Launching of the Steel Girders for Bridges Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30051.pdf Paper Url : https://www.ijtsrd.com/engineering/civil-engineering/30051/incremental-launching-of-the-steel-girders-for-bridges/manish-kotpalliwar

The Internet of Things IoT is a system of interrelated computing devices, mechanical and digital machines, objects, animals or people that are provided with unique identifiers UIDs and the ability to transfer data over a network without requiring human to human or human to computer interaction. In the consumer market, IoT technology is most synonymous with products pertaining to the concept of the smart home , covering devices and appliances such as lighting fixtures, thermostats, home security systems and cameras, and other home appliances that support one or more common ecosystems, and can be controlled via devices associated with that ecosystem, such as smart phones and smart speakers. Akilandeshwari. K | Mohanapriya. S | Sandhyia Sri. R Internet of Things Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29939.pdf Paper Url : https://www.ijtsrd.com/engineering/computer-engineering/29939/internet-of-things/akilandeshwari-k

Tourism in Nigeria is still in its infancy. For the tourism industry as a sector of the Nigerian economy, it is not in dispute that it has abundance of resources that can be diversified to transform the socio economic lives of the populace yet, the sectors performance is nowhere in tune with turning the economy into a foreign exchange earner. Poor impression and attitude to tourism in Nigeria resulted in, most Nigerians, not considering tourism as good career or lucrative income generating enterprise. The present work aims to evolve modalities for sustainable tourism development programmes in Nigeria, capable of remedying the dwindling tourist attractions to sustainable standards. The authors investigated the causes of failure of tourism development in Nigeria and solutions to improving it. They were careful with analytical instruments and tools used. The disciplinary areas of focus are, architecture and tourism, or better said, tourism development through architecture. As such, the authors adopted content base analysis, qualitative research method with data from secondary sources. Nigeria offers a wide variety of tourist attractions such as extended and roomy rivers and ocean beaches ideal for swimming and other water sports, unique wildlife, vast tracts of unspoiled nature ranging from tropical forest, magnificent waterfalls, some new rapidly growing cities and climatic conditions in some parts particularly conducive to holidaying. Other attractions include traditional ways of life preserved in local customs rich and varied handicrafts and other colorful products depicting or illustrative of native arts and lifestyle. Nigerians need to immediately realize that there are lots to gain from an environmentally friendly eco cultural tourism business than the current over dependency on mineral exploitation and exploration for export earnings. The various challenges and constraints facing tourism sector must need to be eradicated or ameliorated. There should be a sub regional and regional collaboration to establish economically viable monuments and heritage sites in the country. In order to checkmate the security concerns of tourist and the tourist centers, well coordinated tourism security committee compromising of all security agencies and host communities should be set up. Obiadi, Bons N | Ezezue A. M | Uduak Peter Umo Architecture and Tourism: The Case of Historic Preservations, Human Capital Development and Employment Creation in Nigeria Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30124.pdf Paper Url : https://www.ijtsrd.com/engineering/architecture-and-planning/30124/architecture-and-tourism-the-case-of-historic-preservations-human-capital-development-and-employment-creation-in-nigeria/obiadi-bons-n

Social Media networks have broad acceptance in current status. Almost everyone who has access with internet is linked with some kind of social communication using available social medias. Now social Medias are providing lots of utility to its users. This paper studies utility of its are useful for all learners . So the paper explain usefulness of any type of media in any field of education. Youth gain lots of knowledge through technology in society .That why it is important for young learners Social media can be used effectively to build brand awareness, as well as by people to share brand positives and negatives. The point is that no matter how you slice it social media isnt a passing fad. It is becoming a standard communication platform that has dramatically changed the way that brands and consumers interact with one another. Mrs. Madhu | Miss. Shreya | Miss. Ruchi Effectiveness of Social Media for Learning Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30114.pdf Paper Url : https://www.ijtsrd.com/management/marketing/30114/effectiveness-of-social-media-for-learning/mrs-madhu

The rising concern for beneficial, easy design and deployable, flexible, reliable, cost effective and scalable wireless network has led to the evolution of mobile Ad hoc networks MANETs . This type of network in its own peculiarity is a wireless, mobile, infrastructure less network technology. It has been found to be very useful in military, commercial, personal, emergency related applications but not without some security challenges. The security of MANET is an important challenge to network engineers due to its unmonitored deployment nature and inherent resource limitation. This paper presents a study of some of these security issues that militate against ad hoc network technology design, deployment and operation. Possible counter measures required to overcome these challenges are also presented. Nwabueze, C. A | Usiade, R. E Security Vulnerability and Counter Measures in Mobile Ad-Hoc Networks Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30107.pdf Paper Url : https://www.ijtsrd.com/computer-science/computer-network/30107/security-vulnerability-and-counter-measures-in-mobile-ad-hoc-networks/nwabueze-c-a

Because radon gas is colorless and odorless, it is impossible for humans five senses to know whether one is exposed to it and as it is an inert gas that is nine times heavier than air it is prone to accumulation after being brought into the room through cracks in old buildings, connections and drains, thus creating indoor radon exposure problem. Although indoor radon concentration is related to indoor temperature and humidity, no research has been conducted to actually control indoor temperature and humidity, and to find out how changes in indoor temperature and relative humidity have affected indoor radon concentration. In this paper, we experimented with varying temperature and relative humidity respectively to certain conditions in the laboratory where the thermo hygrostat is installed, and using the results of the measured experiment, the relation between indoor temperature, and relative humidity and indoor radon concentration was explored. Jai-Won Chung | Tae-In Hyon | Gyu-Sik Kim Effect of Temperature and Humidity on Indoor Radon Concentration Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30128.pdf Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/30128/effect-of-temperature-and-humidity-on-indoor-radon-concentration/jai-won-chung

Reform Movements has great importance in the history of Jammu and Kashmir with the starting of Dogra rule in AJandK state. The Muslim society was suffered by different anti Muslim rules and traditions. In this regard the Muslim Community started social work to get rid of Dogra brutality and injustice. These reformative works have great importance in the history of Kashmir. This study tries to identify and analysis the various socio religious reform movements among the Muslims of Kashmir. This study will also be an attempt to document all the record and contribution of the pioneers of those religious reform movements who were responsible for change revolution in the society of the Jammu and Kashmir. Najma Zahoor Socio-Religious Reform Movements among the Muslim in Jammu & Kashmir during Dogra Period Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30103.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/social-science/30103/socio-religious-reform-movements-among-the-muslim-in-jammu-and-kashmir-during-dogra-period/najma-zahoor

This paper proposes a dynamic power decoupling DPD strategy for the three phase grid tied PV power system without increasing the dc link capacitance. Under normal condition, the interleaved boost converter will extract the maximum power point MPP from the PV array and the three phase inverter will inject the power to the grid. During the unbalanced grid fault scenario, the input power and current of the interleaved boost converter will be controlled by the proposed DPD to achieve the power decoupling capability as well as to eliminate the dc link voltage oscillation. The proposed work has been carried out in MATLAB, and the results are presented. Manasa | Nirmaladevi Control of Two Stage PV Power System under the Unbalanced Three-Phase Grid Voltages Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30091.pdf Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/30091/control-of-two-stage-pv-power-system-under-the-unbalanced-three-phase-grid-voltages/manasa

The main objective of the study is to determine the effect of forensic accounting on accountability in Anambra state ministry of finance, Awka, the specific objectives are to ascertain the extent forensic accounting practices ensure accountability in Anambra state ministry of finance and to determine whether lack of forensic accounting practices led to fraudulent activities in Anambra state ministry of finance. The study used survey research design and data were collected from questionnaires distributed from the targeted respondents. Data collected were tested using t test statistical tool. The result shows that forensic accounting practices ensure accountability in Anambra state ministry of finance and lack of forensic accounting practices led to fraudulent activities in Anambra state ministry of finance. The study recommended that government should consider providing more fraud hotlines, improve the whistle blowing policy and establish forensic accounting department in the public sector in order to enhance the fraud detective and preventive mechanism in the public sector. Ofurum, Darlington I | Falope, Femi J | Clement Ikwuoche G. (ACA) Effect of Forensic Accounting on Accountability: Evidence from Ministry of Finance, Awka Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30129.pdf Paper Url : https://www.ijtsrd.com/management/accounting-and-finance/30129/effect-of-forensic-accounting-on-accountability-evidence-from-ministry-of-finance-awka/ofurum-darlington-i

"Gas leakage is a major problem with industrial sector and also home applications etc. To avoid the gas leakage is to install a gas leakage detection system at the society. The main aim of this project is used to design that can automatically gas booking system, gas leakage detection system, alert system and control gas leakage. LPG cylinders have become an integral part of every home. Our kitchens are occupied with LPG cylinders which is used to make delicious food. But it can be very dangerous to make problems in our life. The aim of this project is to design a safety oriented system which will alert the user about any problem in the kitchen through mobile by using GSM and give the buzzer sound by using alert system. This system will detect the gas leakage of LPG and send an alert information to the user, at the same time it will switch off the gas supply of LPG by switching regulator switch using BO Battery Operating motor. It is also used to monitoring the high voltage passing through the home appliances and also industrial sector it will used to reduce the voltage level in the power supply. It also measures safety from any gas leakage accident like explosion. In additional advantage, this system has a load cell used to continuously monitoring the cylinder weight and send information to the user. The project is very helpful to check the entire LPG cylinder booking procedure automated Without human intervention and also Automated cylinder booking we also designed feature related to the safety to the user. And also the LPG Cylinders are produced some heat energy. The heat energy is generating the power by using generator through exhaust fan. A. Afrose Banu | S. Arthi | S. Bharathi | S. Vimalnath A Microcontroller Based LPG Cylinder Booking and Leakage Detection using GSM Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30106.pdf Paper Url : https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/30106/a-microcontroller-based-lpg-cylinder-booking-and-leakage-detection-using-gsm/a-afrose-banu"

Food manufacturing transforms livestock and agricultural products into products for consumption. It involves businesses that collect raw food materials and process them into edible products. It processes a wide range of food and drinks to cater to the needs of the global population. In the United States, the food manufacturing industry has gone through significant changes in recent decades due to climate change effects on agriculture, rising environmental standards, severe competition, and changing and diverse customer expectations. This paper provides a primer on food manufacturing. Matthew N. O. Sadiku | Tolulope J. Ashaolu | Sarhan M. Musa Food Manufacturing: A Primer Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30132.pdf Paper Url : https://www.ijtsrd.com/engineering/food-engineering/30132/food-manufacturing-a-primer/matthew-n-o-sadiku

A food policy is designed to influence the operation of the food system network of farms, distributors, restaurants, retailers, and consumers . It impacts on how food is produced, processed, distributed, marketed, consumed, and disposed. Implementing good food policies is crucial to achieving more equitable and sustainable food systems. This paper provides a brief introduction on food policy. Matthew N. O. Sadiku | Tolulope J. Ashaolu | Sarhan M. Musa Food Policy: An Introduction Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30133.pdf Paper Url : https://www.ijtsrd.com/engineering/food-engineering/30133/food-policy-an-introduction/matthew-n-o-sadiku

The importance of food is increasingly included on the urban agenda in many nations. Food systems consists of the various processes and infrastructures involved in feeding the society, including growing and harvesting, production, processing, transportation, distribution, and consumption. Food policy is designed to influence the operation of the food systems. Food insecurity access to adequate food for all is a global problem. So is the food policy. Global interdependence in the worlds food market makes analysis of food policies more difficult. For example, China, Indonesia, and Sri Lanka are committed to solving the pressing problems of hunger and poverty in their nations. This paper provides a brief introduction on food policy at the global level. Matthew N. O. Sadiku | Tolulope J. Ashaolu | Sarhan M. Musa Global Food Policy: A Primer Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30134.pdf Paper Url : https://www.ijtsrd.com/engineering/food-engineering/30134/global-food-policy-a-primer/matthew-n-o-sadiku

Banks are catalysts to economic development. Any stable economy will depend upon how solid its banking system operates. Due to this, there is the need for good and effective reforms. Thus, in 1964, the Custom Union of Central African States UDEAC 1 was created with one of the main aims being to put in place a common market for the region and to harmonise the economic policies. Within such a common market, there should be free circulation of persons, merchandise, services and capital several steps were taken to realise this goal. The banking sector was one of the areas that needed much intervention to ensure free circulation of capital and the financing of the economy. There were no common policies of control of banking activities in the zone. There was, therefore, need to harmonise the legislation of the member states in the domain of banking and finance, while conserving the option to take urgent measures in case of turbulence in the monetary domain. The Bank of Central African States BEAC 2 therefore, was founded in 1972 after the signing of the Brazzaville accords with one of the main aims being to harmonise banking activities. The member states, through this important institution, engaged in harmonising their policies relating to the exercise of the banking profession, control of financial establishments as well as distribution and control of credit. To realise this will, the constitution of BEAC gave it large competence to impose management norms on banks and financial establishments, give them technical assistance and ensure the respect of laid down rules.3 This paper therefore questions the strength of the reforms put in place to guarantee effective banking operations within BEAC as well as its degree of applicability. Akama Samuel Penda | Nji Keneth Ndikum Legal Analysis in Relation to Authorised Banking Operations within the BEAC Zone Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30143.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/education/30143/legal-analysis-in-relation-to-authorised-banking-operations-within-the-beac-zone/akama-samuel-penda

Shleepada is Kapha Pradhana Tridoshaja Vyadhi which manifests by vitiating Mamsa, Kapha and Rakta and it leads to abnormal enlargement of different body parts. Dusta Jala is considered to be one of the prime causes of Shleepada which manifests with the symptoms of fever, painful swelling starting from groin and extending to the feet. It is classified into three types as Vataja, Pittaja and Kaphaja. Some Acharyas opine that Shleepada manifests to the other body parts like hands, ears, eyes, penis, lips and nose. Ayurveda though provides therapeutic measures for disease, it emphasis more on maintenance and promotion of health. The present article reviews the concept of Shleepada enunciated in Samhitas. Monika Gupta | Jayaram Krishna M | Rashmi Pujar | Gopikrishna S A Critical Appraisal on Shleepada in Ayurveda Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30121.pdf Paper Url : https://www.ijtsrd.com/biological-science/allied-sciences/30121/a-critical-appraisal-on-shleepada-in-ayurveda/monika-gupta

Good Governance is the basic necessity for keeping the peace and harmony in any humanity. We all the time hear the mention Rajya of Ram as an model form of good governance that tells us about The Empire of Rama, there was no starvation, soreness or discrimination among the people. The Empire are based on truthfulness, without violence and other ethics principles. According to Ram Rajya, a leader is expected to look after everyone who need help and support instead of accumulating wealth for himself. In this research paper, researcher investigates about the key points of good governance explained in the holy book The Ramayana. Mrs. Ranjna | Mrs. Nitu The Concept of Good Governance in Ramayana Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30144.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/history/30144/the-concept-of-good-governance-in-ramayana/mrs-ranjna

Passive energy dissipation have been used so far to dissipate the unwanted energy due to earthquake and heavy wind actions. The complete failure of the structures that has occurred in the past due to catastrophic earthquakes may be avoided with the use of such devices. The study is concerned with the use of accordion metallic dampers that uses hysteretic energy to dissipate the unwanted energy due to earthquake. It consists of corrugated thin wall tubes installed as a brace connection in the frame. The axial deformation of the accordion damper enhances the lateral buckling capacity and results in maximum reduction of the damaging measures. The study emphasizes the use of such dampers and in depth analysis is performed by subjecting the building to base excitations in order to assess the nonlinear performance of the dampers installed in the building Rahul Tahilyani | Dilip Budhlani Seismic Performance of Reinforced Cement Concrete Structures with and Without Viscous Dampers Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30122.pdf Paper Url : https://www.ijtsrd.com/engineering/civil-engineering/30122/seismic-performance-of-reinforced-cement-concrete-structures-with-and-without-viscous-dampers/rahul-tahilyani

The study was on the brain entropy and brain temperature. The study simply reviewed the research work of other researchers to arrive at a reasonable conclusion of how temperature can impair brain entropy. The brain is the central focus of mental health and the functionality of the brain is a function of brain entropy. The brain entropy is a function of brain temperature. The brain entropy is inversely proportional to temperature. It was discovered that removal of heat from the brain decreases the brain temperature which in turn enhances brain entropy. This heat removal from the brain can be achieved through increase in cerebral blood flow, decrease in intracranial pressure ICP , increase in the cerebral perfusion pressure CPP , increase in the blood vessels radius, increase in the heat conductivity of the tissue, short characteristic length and decrease in the blood viscosity i.e. the arterial blood temperature is much less than brain temperature, heat will be removed from the brain. The following were discovered to promote brain entropy enhancement decrease in temperature, decrease in brain size, and increase in nerves density that gave compressibility to be less than one. Brain entropy is also enhanced when the deviation of internal variation from the equilibrium is small, the system maintain thermodynamic equilibrium signified high brain entropy or decrease in the brain temperature . The brain efficiency is said to be 100 , if the brain is able to maneuver all the neurons in each of the cells to involve in information processing. The probability that the whole neurons are involved in the formation processing is 1, which is equal to the probability of the whole brain. The probability that all the brain nerves will be engaged in the information processing and transmission depends on the brain temperature. Entropy is then the ability of the brain to conveniently maneuver even the complex incoming disorder to get useful information and to relay the information through neurons for decision making. The entropy predicted by the Sackur-Tetrode equation approaches negative infinity as the temperature approaches zero i.e. the brain attains black hole characteristics or Sun at its expiry period . Jaiyeola O. Paul | Abdullahi Ayegba | Irene E. Benibo | Esu S. Ulaetor The Brain Entropyand Temperature Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30152.pdf Paper Url : https://www.ijtsrd.com/engineering/other/30152/the-brain-entropyand-temperature/jaiyeola-o-paul

The paper examined the impact of climate change on epilepsy patients in and out patient that visited Neuropsychiatric Hospital Akure, Ondo State, Nigeria. The main independent variables of interest are temperature and relative humidity as climate the two parameters covering a period of eight years 2010 2017. Data of in and out patients diagnosed with epilepsy and other related cases were sourced from the hospital records. The population of the study is 2873 epilepsy patients that visited the hospital within the period of study, comprising of 143 4.98 age 0 4 years, 447 15.56 age 5 9 years, 963 33.52 age 10 19 years, 983 34.22 age 20 44 years, 273 9.50 age 45 64 years, 36 1.25 age 65 69 years and 28 0.97 age 70 years. And for the purpose of analysis and discussion the population of study was further stratified into Children aged 0 19 years 1553 54.05 , adult aged 20 64 years 1256 43.72 , older adult aged 65 69 years 36 1.25 and elderly aged 70 28 0.97 . Data collected were analyzed with the use of single regression Analysis. The study found climate parameters temperature and relative humidity make population vulnerable to the risk of epilepsy cases and therefore increases their visits to the hospital. There are positive associations between the number of epilepsy patients in the Neuropsychiatric Akure and the increase in the two climate two parameters i.e. temperature and relative humidity . Children aged population are more vulnerable to the risk of epilepsy mental ill health as temperature increases while adult aged population are more vulnerable to the risk of epilepsy mental ill health as relative humidity increases. Among children aged, the age group 10 19 years emerged to be more vulnerable to the risk of epilepsy with increase in temperature while age group 20 44 years among the adult aged emerged to more vulnerable to the risk of epilepsy as relative humidity increases. Generally, Epilepsy developed more in those adults than the children when sum the contributions from the two parameters. The vulnerability of various age groups population to epilepsy cases was not equally distributed throughout the year 2010 2017 and this is an indication that different age groups responded differently to the effects of temperature and relative humidity variability.. The effective strength of relative humidity is on the children and adult aged than others group i.e. older adults and elderly , but more on the adult aged while the effective strength of temperature is seen more on the children aged than others group i.e. Adults, older adults and elderly Jaiyeola O. Paul | Abdullahi Ayegba | Esu S. Ulaetor Impact of Climate Change on Epilepsy Patients with Age Stratifications: Variability of Temperature and Relative Humidity Effects Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30153.pdf Paper Url : https://www.ijtsrd.com/engineering/other/30153/impact-of-climate-change-on-epilepsy-patients-with-age-stratifications-variability-of-temperature-and-relative-humidity-effects/jaiyeola-o-paul

The paper examined the impact of temperature and relative humidity escalation on mental health of in patient and out patient admitted into Neuropsychiatric Hospital Akure, Ondo State, Nigeria. The main independent variables of interest are temperature and relative humidity covering a period of eight years 2010 2017. Data of in and out patients diagnosed with psychiatric cases were sourced from the from the hospital records. The population of the study is 53616 numbers of patients, comprising of 25160 male and 28456 female patients that visited the hospital from the year within the years of study. Data collected were analyzed with used of single regression and multivariate regression analysis using STATA Software. The study found that climate parameters temperature and relative humidity as a separate variables and the overlapping effect of the two independent increases the vulnerability of male and female patients to the risk of psychiatric cases and increases the numbers of patient visiting the hospital. There were positive associations between the numbers of male female patient and the two parameters as well as between the overlapping effects. Male population are more vulnerable to the risks of psychiatric cases as temperature increase while female population were more vulnerable to the risks of psychiatric cases as relative humidity increases. The impact of the overlapping resultant effects of the two independent variables is more on the male than the female that were visiting the hospital. Male populations were generally more vulnerable to the risks of psychiatric cases than female as the metabolic rate and brain volume increases with temperature. The vulnerability of male and female population to psychiatric cases was not equally distributed throughout the period of study. Male and female population respond differently to the impact of each parameter throughout those years considered and these are considered to be psychological and physiological factor differences in male and female. Out of a total 53616 numbers patients that visited the hospital between 2010 2017 , only 21.28 11,409 are male patients that were diagnosed with psychiatric cases and all together traceable attributed to increased temperature, relative humidity and overlapping effect escalation while only 20.02 10,736 was female that were diagnosed with psychiatric cases and all together traceable attributed to the increased temperature, relative humidity and overlapping effect escalation. In the overall analysis male population were more vulnerable to the risk of psychiatric cases than female as the two independent variables increases. The effective strength of temperature made the numbers of male female populations more vulnerable to the risk of psychiatric cases than the effective strength of relative humidity. Jaiyeola O. Paul | Abdullahi Ayegba | Esu S. Ulaetor Comparative Analysis of the Impact of Climate Change on Male and Female Mental Health Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30154.pdf Paper Url : https://www.ijtsrd.com/engineering/other/30154/comparative-analysis-of-the-impact-of-climate-change-on-male-and-female-mental-health/jaiyeola-o-paul

The technological advancement of the current technology has affected the processes of the most of the economic and social related businesses. The aims of this advancement are to serve and make human life more comfortable and however, there are still lots of areas in our daily life where manual processes are used. Taking as an example in the water control and management systems, where many authorities use manual systems for water controland management. Especially nowadays most of the countriesare still using manual system for controlling and monitoring the dams. Due to the complicated and time consuming process in a manual system, a model for Remote Monitoring and Controlling of Dams is proposed that uses remote control technology, linked to the web technology, to attain great success in monitoring and controlling water levels in managing dams. This paper is to present a new solution which it is to implemental proposed system called as RMCD Remote Monitoring and Controlling of Dams. With the proposed system it will allow the user to control and monitor the dams remotely which it is saving a lot of efforts, reducing the cost and also increasing the monitoring quality as the users are going to use automated system rather than using of manual system. Shaik Roshan | Dr. M. Muthuvinayagam | S. Manivannan IoT Based Remote Monitoring and Controlling for Shutter Systems Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30123.pdf Paper Url : https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/30123/iot-based-remote-monitoring-and-controlling-for-shutter-systems/shaik-roshan

Pregnancy is considered as a normal physiological event and is typically, a time of joy and anticipation. Identifying the symptoms will help to screen the high risk cases at booking. It will help the health professionals to plan the suitable surveillance routine to detect preeclampsia for the rest of the pregnancy Methodology Descriptive research design was used to assess the presence of vascular symptoms among pregnant women with Pregnancy Induced Hypertension PIH . Pregnant women who diagnosed with pregnancy induced hypertension, belongs to hilly area, primigravida, gestational age between 26 - 30 weeks and experiencing at least three vascular symptoms, were included in the study. One hundred and six 106 women with pregnancy induced hypertension were selected for study by using purposive sampling technique. The tools used to collect the data were 1. Demographic questionnaire, 2. Scale to assess the Vascular Symptoms. To assess the magnitude of edema 4 point edema scale was used. To assess the head ache and epigastric pain numerical pain scale was used. Informed written consent was taken from each participant. Results Half of the women 50 had moderate BP, highest percentage 58.50 of women had moderate proteinuria, almost half of the participants 56.60 had moderate edema, more than one third of the participants 69.81 had normal weight gain. Head ache depicts that highest percentage 40.57 of women had mild head ache, one third 38.68 of women had mild pain, two third 68.87 of women had normal fetal growth or no IUGR, and 65.09 of women verbalized that they are experiencing Insomnia and 20.75 of the women verbalized that they are experiencing depression. Conclusion The symptoms underlying evidence base can be used to assess risk at booking especially in hilly area. High quality antenatal care can be provided for those cases in order to minimize the complications in both mother and the fetus. B. Gomathi | Anuchitra R | Ruchira Nautiyal Magnitude of Vascular Symptoms among Pregnant Women with Pregnancy Induced Hypertension (PIH) in Hilly Areas of Uttarakhand Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30064.pdf Paper Url : https://www.ijtsrd.com/medicine/nursing/30064/magnitude-of-vascular-symptoms-among-pregnant-women-with-pregnancy-induced-hypertension-pih-in-hilly-areas-of-uttarakhand/b-gomathi

Diverse resource of the earth increasing population, pressure on resources and mans differing cultures or ways of life are the major inter related factors which involve in the interaction pattern of man with his planet. In the course of technological development by increasing his range of action, man has intervened more and more with the rest of the organic world. The increasing population and its wants have imposed severe constraints on the natural resources. Constant pressure connected with the increasing requirements for food, fiber and fuel for human, fodder for cattle population and raw materials for industries have led to an increasing rate of destruction of the forest since the turn of the century. Soumen Jana A Study on the Socio- Economic Impact of Deforestation upon the Tribal Villagers in Galudih, East Singhbhum, Jharkhand Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29356.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/sociology/29356/a-study-on-the-socio--economic-impact-of-deforestation-upon-the-tribal-villagers-in-galudih-east-singhbhum-jharkhand/soumen-jana

In Matrix multiplication we refer to a concept that is used in technology applications such as digital image processing, digital signal processing and graph problem solving. Multiplication of huge matrices requires a lot of computing time as its complexity is O n3 . Because most engineering science applications require higher computational throughput with minimum time, many sequential and analogue algorithms are developed. In this paper, methods of matrix multiplication are elect, implemented, and analyzed. A performance analysis is evaluated, and some recommendations are given when using open MP and MPI methods of parallel of latitude computing. Adamu Abubakar I | Oyku A | Mehmet K | Amina M. Tako Comprehensive Performance Evaluation on Multiplication of Matrices using MPI Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30015.pdf Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/30015/comprehensive-performance-evaluation-on-multiplication-of-matrices-using-mpi/adamu-abubakar-i

Concrete is one of the safe, strong and simple building material used in all types of construction works. The main inconvenience in concrete is that the tensile strength is relatively low. The introduction of steel fibers in concrete converts its nature from brittle to ductile. Cracks plays an important role in construction as they change concrete structure into permeable elements and with a high risk of corrosion. It is important to reduce the crack width and this can be achieved by adding polypropylene fibers to concrete. In this experimental investigation, the mechanical properties of HFRC containing Copper slag with various percentages of fibers like Steel fiber and Polypropylene fiber is evaluated. The mixes were designed for five different percentages such as 10 , 20 , 30 , 40 and 50 of Copper slag as replacement of fine aggregate with the small percentage of fibers as constant. The mechanical properties of these mixes were found and then comparing those results with the conventional concrete. The optimum dosage of Copper slag has to be found from these results. By the usage of optimum dosage, structural behaviour and durability characteristics will be evaluated. P. Saranya | V. C. Prabha Performance Evaluation of Hybrid Fiber Reinforced Concrete using Copper Slag as Replacement Material of Fine Aggregate Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30126.pdf Paper Url : https://www.ijtsrd.com/engineering/civil-engineering/30126/performance-evaluation-of-hybrid-fiber-reinforced-concrete-using-copper-slag-as-replacement-material-of-fine-aggregate/p-saranya

There are many events in daily life where a queue is formed. Queuing theory is the study of waiting lines and it is very crucial in analyzing the procedure of queuing in daily life of human being. Queuing theory applies not only in day to day life but also in sequence of computer programming, networks, medical field, banking sectors etc. Researchers have applied many statistical distributions in analyzing a queuing data. In this study, we apply a new distribution named Exponential Gamma distribution in fitting a data on waiting time of bank customers before service is been rendered. We compared the adequacy and performance of the results with other existing statistical distributions. The result shows that the Exponential Gamma distribution is adequate and also performed better than the existing distributions. Ayeni Taiwo Michael | Ogunwale Olukunle Daniel | Adewusi Oluwasesan Adeoye Application of Exponential-Gamma Distribution in Modeling Queuing Data Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30097.pdf Paper Url : https://www.ijtsrd.com/mathemetics/statistics/30097/application-of-exponential-gamma-distribution-in-modeling-queuing-data/ayeni-taiwo-michael

The road plays major role in todays transportation. The number of vehicles are also increased. Due to this road jamming and traffic occurs. To handle this traffic in intelligent way the automatic speed breaker is used. When there is no need of speed breaker it disappear from the road and when there is need it comes on the road from the ground. In implementation of this project iron made hemi cylindrical pipe is used as speed breaker which is capable of rotating itself by using control circuitry of embedded system. In this project RTC is connected to control circuitry. When the control circuitry receives the RF signal the RTC will start and speed breaker comes on the road it remains until the countdown gets zero. We can adjust the time according to our requirement. It is also called as dynamic traffic control system. It provides priority to the emergency vehicles. So this type of speed breaker are very useful before any schools and organization. S. Jeevitha | S. Jothika | M. Saikiruba | S. Vijayakumar Time Based Smart Speed Breaker using Embedded Systems Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30139.pdf Paper Url : https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/30139/time-based-smart-speed-breaker-using-embedded-systems/s-jeevitha

The forest plays a major role in stabilizing increasing temperatures due to its climate mitigation capacity. This is not unconnected to the carbon storing and sequestration potentials of forests. The mangrove as one of the global forest types is said to be a major carbon store. This conclusion is characterized by some knowledge gaps on the actual carbon stock and sequestration potentials of some mangroves forest on the Central African Sub regional landscape. Some of these areas are the Bakassi mangroves in the South West Cameroon. Cross border conflicts, piracy and over exploitation have rendered the sourcing of appropriate data on its carbon stock and sequestration potentials difficult. In strive to bridge this knowledge gap, this work carried out a baseline assessment of the carbon stock and sequestration rate of the area. To achieve the study objectives, stratified random opportunistic sampling inventory design based on five forest canopy height classes, tree Diameter at Breast Height DBH and canopy nature using digital elevation model DEM of the shuttle Radar Topographic Mission SRTM . This combination evaluated the species type and forest structure around the areas. Carbon stocks were estimated with the use of allometric equations using biomass data collected within main plots, sub plots, micro plots and transects. Results showed that mean biomass carbon stock density for the height classes for Bakassi ranged from 33.5 Mg ha to 598.9Mg ha. Thus on average, for a hectare in Bakassi, the carbon stock is 880.437 Mg ha and a sequestration rate of 3231.204 tCO2e ha . Kamah Pascal Bumtu | Nkwatoh Athanasius Fuashi | Longonje Simon Ngomba Structure, Biomass Carbon Stock and Sequestration Rate of Mangroves in the Bakassi Peninsula, S-W Cameroon Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30171.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/environmental-science/30171/structure-biomass-carbon-stock-and-sequestration-rate-of-mangroves-in-the-bakassi-peninsula-s-w-cameroon/kamah-pascal-bumtu

This paper focuses on the students trend in starting their own businesses on graduation. Moreover, it evaluates the undergraduate students at university level to create their own companies on graduation and analyse the personal attributes and competencies that may influence such trend. The statistical procedures adopted in the processing of the data collected from a sample of 240 students with particular regard to the possibility of their establishing their own enterprise. Gender, risk, factors related to profession employment choice and academic training were found to significantly affect students interest in and motivation for start up business. Huynh Canh Thanh Lam Students Behaviour in Start-Up Business Trend Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30147.pdf Paper Url : https://www.ijtsrd.com/economics/commerce/30147/student%E2%80%99s-behaviour-in-startup-business-trend/huynh-canh-thanh-lam

Digital Notice Board is principal element in any organization or public utility for the locations like bus stop, railway stations, schools, colleges, malls, etc. But sticking multiple notices each day is a hectic process. An individual character is wanted to take care of these notices. This mission is about advanced mobile board. The venture is built around raspberry pi. Display is obtained on LCD. A wi fi constantly used for Data transmission. we can add or erase or vary the textual content in accordance to our need. At transmitter, authorized PC is used for sending notices. At receiving quit wi fi fidelity is linked to raspberry pi. When a licensed consumer sends a message that is to be displayed from his system, it is familiar by way of receiver. Wireless is a popular technology known that how to approve digital device to alternate information over a computer network, together with high velocity wireless connections. The statistics is acquired from authenticated user, then it sends the records to raspberry pi. Pragati Gupta | Akash Parida | Akash Naidu Digital Notice Board Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30148.pdf Paper Url : https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/30148/digital-notice-board/pragati-gupta

This paper aims to analyse and review the impact of the global financial crisis on human resource management in multinational corporations in Ireland. A review of the literature was done, taking as reference the study of Gunningle, Lavelle and Monaghan 2013 . In addition, newspapers, magazines, books and scientific journals were used as secondary data. The great contribution of the article is related to the fact that how HR managers can be seen as key players within companies, acting in a strategic way over the crisis period in Ireland. It is necessary for HR managers to communicate effectively, build good relationships and pay attention to the difficult task of balancing individual and organizational desires. Addressing the specific case of Ireland, there are limitations from a general point of view, but it works as an illustration of managerial alternatives to companies impacted by economic turbulence , whether for validation of proposed ideas or for the construction of new ones. Charles Alves De Castro The Impact of the Global Financial Crisis on Human Resources in Multinational Companies in Ireland Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30145.pdf Paper Url : https://www.ijtsrd.com/management/international-business-issues/30145/the-impact-of-the-global-financial-crisis-on-human-resources-in-multinational-companies-in-ireland/charles-alves-de-castro

Wireless Automation System has drawn acceptable attentions of researchers or people using it for more than a decade. These systems can be implemented by using technologies as mentioned Z Wave, Insteon, Bluetooth, WiFi, Wavenis and ZigBee. In the above mentioned technologies ZigBee based systems uses have increased gradually in different applications scenarios due to its low cost and low power consumption. ZigBee is formalized by IEEE 802.15.4 radio standards and it is one of the mostly used transceiver standard that is used as a communication technology to connect local networks. In this paper detailed study of ZigBee has been interpreted and its application in automation system has also been discussed. Satyajit Dandi Study of ZIGBEE Technology and its Application in Wireless Automation System Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30200.pdf Paper Url : https://www.ijtsrd.com/computer-science/computer-network/30200/study-of-zigbee-technology-and-its-application-in-wireless-automation-system/satyajit-dandi

This research represents an experimental study on influence of urea on concrete through various tests on urea, cement, concrete and water. Test of finesses modulus, slump test, carbonation test, pH test, urea ingression test and increase in strength with urea percentage .This study deals to overcome three major problems in the concrete namely heat of hydration, permeability, and corrosion of steel bar embedded in concrete. Urea can generally reduce the temperature of concrete both at casting phase and during the procedure of hydration. Urea does not opposite effect the durability of reinforced concrete, except where there is an accumulation of urea crystal growth. Er. Babita | Mr. Ravi Prakash Sharma | Mr. Vikram | Dr. D. K. Gupta Influence of Urea on Concrete Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30172.pdf Paper Url : https://www.ijtsrd.com/engineering/civil-engineering/30172/influence-of-urea-on-concrete/er-babita

"Exhaust emission coming from IC engines affects not only the environment but also the human health. This serious issue has got attention by the government as well as from the researchers throughout the world. In this regard it is necessary to find out alternative to not only fossil fuel but also environment cooperative fuel. In this regard, investigations were carried out by using Jatropha biodiesel and its blend with used lubricating oil which was discarded after use. The test was carried in a single cylinder diesel engine and different terms such as performance and emissions of diesel engine were found out and compared with diesel operation. It was noticed that engine can be run by using these kinds of fuels. By using these fuels not only we are solving waste disposal problem but also replacing diesel fuel and environment friendly fuel. The used lubricating oils were blended with Jatropha biodiesel in different proportions and test were done. Pranav Kumar | Ravindra Mohan | Jagdeesh Prasad Investigations on a Diesel Engine Run on used Lubricating Oil-Biodiesel Blend as an Alternative Fuel Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30158.pdf Paper Url : https://www.ijtsrd.com/engineering/mechanical-engineering/30158/investigations-on-a-diesel-engine-run-on-used-lubricating-oil-biodiesel-blend-as-an-alternative-fuel/pranav-kumar"

The paper covers the most important part of testing which is essential for testing the performance of application before going Live. In my research and analysis with Microfocus owned tool Load Runner, we will discuss about it deals with web based application and approach to calculate transaction per hour TPH for test execution. As tool supports many protocols based on the nature of application. Performance testing is used to analyze the real time response time for business transaction. Application be constant with increasing load or with simultaneous users should not affect the performance of the application, is our main motto as a Performance Tester Engineer. Ashish Kumar Load Runner: Methodology to Performance Testing Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30155.pdf Paper Url : https://www.ijtsrd.com/computer-science/cognitive-science/30155/load-runner-methodology-to-performance-testing/ashish-kumar

In this study, the solutions of a standard congruence of higher degree modulo a multiple of composite power integer is considered for formulation and is formulated. The formula developed is proved and verified true. Oral calculation of solutions are also possible. Formulation is the merit of the paper. Prof B M Roy RP-108: Formulation of Solutions of Standard Congruence of Higher Degree modulo a Multiple of Composite Power Integer Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30151.pdf Paper Url : https://www.ijtsrd.com/mathemetics/other/30151/rp-108-formulation-of-solutions-of-standard-congruence-of-higher-degree-modulo-a-multiple-of-composite-power-integer/prof-b-m-roy

This paper proposes a detailed switching model for the medium voltage cascaded H bridge multi level inverter drive and induction motor system using fuzzy logic controller which is suitable for power system dynamic studies. The model includes the We describe in this book recent advances in the fuzzy logic based augmentation of neural networks and in optimization algorithms and their application in areas fuzzy logic can help design robust individual behaviours units. Fuzzy logic controllers incorporate heuristic control knowledge. It is convenient choice when a precise linear model of the system to be controlled cannot be easily found. Another advantage of fuzzy logic control is to use fuzzy logic for representing uncertainties, such as vagueness or imprecision which cannot be solved by probability theory. Also fuzzy logic offers greater flexibility to user, among which we can choose the one that best, fits the type of combination to be performed. M. Bhuvaneswari | P. Daniel Samson | V. Anish Fuzzy Logic Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30186.pdf Paper Url : https://www.ijtsrd.com/other-scientific-research-area/other/30186/fuzzy-logic/m-bhuvaneswari

Cloud Storage is a branch of Cloud Computing, which plays an important role in IT world. Cloud providers are providing a huge volume of storage space as per the user needs. Due to wide usage of this, it also increases data security issues and threats. Hence efforts are being made to encrypt the data stored in the cloud. In this paper, we are going to look at different encryption and auditing techniques that are used to avoid data breaching in cloud storage. Nikhil Sreenivasan Data Storage Issues in Cloud Computing Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30194.pdf Paper Url : https://www.ijtsrd.com/computer-science/computer-network/30194/data-storage-issues-in-cloud-computing/nikhil-sreenivasan

This study determined the effect of Earnings Management on Bankruptcy Risk in Nigerian Deposit Money Banks. The specific objectives are to examine the effect of Debt Covenant, bank Size moderates effect of Earnings Management Incentives and bank Age moderates the effect of Earnings Management Incentives on Bankruptcy Risk of listed Deposit Money Banks on Nigerian Stock Exchange. The study employed Ex Post Facto research design and data were collected via anuual reports and accounts of the sampled banks in Nigeria. The formulated hypotheses were analyzed and tested with Regression analysis with the aid of E view version 10 2019 . The result shows that debt covenant has inverse significant effect on bankruptcy risk of listed DMBs in Nigeria, implying that degree of debt covenant violations does not strongly influences bankruptcy risk among Nigeria deposit money banks. Also that firm size moderates the effect of earnings management incentives on bankruptcy risk, meaning that the behaviours of the earnings management incentives on bankruptcy risk among Nigerian DMBs significantly and largely depends on the size of the company. Another finding revealed that firm age has no significant moderating effect on the nexus between the selected earnings management incentives and bankruptcy risk of listed DMBs in Nigeria. The study thereby recommended among others that even though higher debt contracting does not necessarily result to insolvency, management should ensure proper balancing of debt and equity in order to ensure a trade off between risk and return to the shareholders. Emma I. Okoye | Ebele G. Nwobi Effect of Earnings Management on Bankruptcy Predicting Model: Evidence from Nigerian Banks Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30187.pdf Paper Url : https://www.ijtsrd.com/management/accounting-and-finance/30187/effect-of-earnings-management-on-bankruptcy-predicting-model-evidence-from-nigerian-banks/emma-i-okoye

In recent days Biometric has become the most popular technique used. The purpose of biometric systems is used to achieve high security, authentication and many more. Through this scheme or technique it ensures that the services are accessed only by the authorized persons. This system works effectively and is user friendly. Biometric systems are progressively exchanging the ongoing password and authentication token based system. Authentication and Security recognition are the two most essential characteristic to consider in scheming a biometric system. In this paper, a broad review is presented to illuminate on the latest technologies in the study of fingerprint based biometric covering these two characteristic with a view to improving system security and authentication recognition. Shweta Naik Biometric System and Recognition: Authentication and Security Issues Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30195.pdf Paper Url : https://www.ijtsrd.com/computer-science/computer-security/30195/biometric-system-and-recognition-authentication-and-security-issues/shweta-naik

Bach flower remedies are an alternative or complementary treatment that is used for emotional problems and pain. Theyre made out of watered down extracts from the flowers of wild plants. Homeopathy is the belief that the body can cure itself. It uses small amounts of natural substances like plants and minerals to treat the body or mind. The idea behind Bach flower remedies is similar to homeopathy. But they use fewer materials and dont work directly on physical symptoms, but instead on the emotions. Dr. Prerna Tiwari | Dr. Mahan Choudhary Literary Research of Bach Flower Remedies with Respect to Pharmacology and Materia Medica Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30169.pdf Paper Url : https://www.ijtsrd.com/medicine/other/30169/literary-research-of-bach-flower-remedies-with-respect-to-pharmacology-and-materia-medica/dr-prerna-tiwari

Self compacting concrete is a non segregating concrete that is placed by means of its own weight. It is highly flow able concrete that can spread without need of vibration. In this study steel and polypropylene fiber are used as hybrid fiber to enhance the workability of the concrete. In addition to this, CONPLAST SP 430 is used as a chemical admixture which is added to SCC by the volume of 2 of cement. These components like hybrid fiber and super plasticizer are added to the concrete to improve the better strength and durability of SCC. In this study, the various mix proportions of fibers discussed in this study are 0 , 0.25 , 0.5 , 0.75 , 1 , 1.5 determined by preliminary test on self compacted materials. By this desired compositions test for fresh concrete such as slump flow, L box and V funnel, U box, J ring are performed for SCC. It is found that compression and split tensile strength has been improved by the addition of hybrid fibers at 1 respectively. This experimental investigation is carried out to improve the compressive, split tensile and flexural strength in SCC for obtaining the optimum value. S. Janani | P. Karthick Experimental Study on Utilization of Hybrid Fibers in Self-Compacting Concrete Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30162.pdf Paper Url : https://www.ijtsrd.com/engineering/civil-engineering/30162/experimental-study-on-utilization-of-hybrid-fibers-in-self-compacting-concrete/s-janani

An increasing number of non steroidal anti inflammatory drugs NSAIDs is available for clinical use each year. This article reviews significant differences between NSAIDs currently available in worldwide, and helps the clinician to evaluate new NSAIDs. While their mechanism of action and efficacy are similar, side effects and cost vary considerably from one agent to another. Because all NSAIDs can produce adverse effects, patients, especially if they are elderly, should be selected carefully for treatment with a particular agent. Sachin Korde | Jugal Vyas A Comprehensive Review on Clinical Pharmacology of Non-Steroidal Anti-Inflammatory Drugs Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30018.pdf Paper Url : https://www.ijtsrd.com/pharmacy/pharmacology-/30018/a-comprehensive-review-on-clinical-pharmacology-of-non-steroidal-anti-inflammatory-drugs/sachin-korde

This paper focuses on the examine how the Vietnamese leather and footwear industry can develop in order to become a strong competitor on the global market. From the concepts we developed a conceptual model which will guide us through the research. The uncompetitive national environment of an export industry will have a bad influence on the performance of the firms and lead to export barriers. Firms can overcome these barriers by learning from global buyers. Knowledge transfer from the global buyer to the local firms will only occur if there is a good relationship between the two. When firms succeed to overcome their export barriers they have achieved upgrading. Dr. Le Nguyen Doan Khoi Upgrading Vietnam Leather and Footwear Industry Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30201.pdf Paper Url : https://www.ijtsrd.com/management/business-economics/30201/upgrading-vietnam-leather-and-footwear-industry/dr-le-nguyen-doan-khoi

This study is anchored on uncovering the relevance of motivation in the relationship to management of human resource, unprogram fits snuggly without it and no company achieves its mission without influencing ones means. Utimate aim of motivation is often toward arouse individuals to bring out member of staff courageous diligence into achieving organization goals with enthusiasm and productivity. Particularly, this research look at the motivation for effective and as well as efficient service provision. The study emphasized on the relevance of motivation as a crucial determining factor for performance of employees within a corporate entity either public or private. The study adopted a expressive research survey which served as its blueprint, upon which the empirical investigation was done. The population size of this particular study underpins a number of mid level employees in Unilever Nigeria PLC, who are about one hundred 100 . A total number of sixty 60 considered selected from this population using stratified sampling technique and data was generated using questionnaires. Data was analyzed electronically with the aid of the social science statistical kit, on which the three hypotheses were tested through Correlation and Variance Analysis. The results of the findings showed that motivation justified having an effect on employee productivity despite its association with organizational efficiency and employee turnover. This study affirmed that human management skills and creativity maybe enhance when employees personal freedom encouraged, moment as well as other significant resources needed. Sabitu Olalekan Owotutu Effect of Motivation on Employee Performance in Unilever Nigeria PLC, Agbara Ogun State Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30163.pdf Paper Url : https://www.ijtsrd.com/management/business-administration/30163/effect-of-motivation-on-employee-performance-in-unilever-nigeria-plc-agbara-ogun-state/sabitu-olalekan-owotutu

The researchers have consistently observed higher heat transfer rates with different kinds of nanofluids among others, Al2O3, Cu, CuO, Fe3O4, Fe2O3, CNT, nickel, Nano diamond, TiO2, and SiO2 flow in a tube under laminar or turbulent flow conditions. The heat transfer enhancement of nanofluids depends on particle concentrations, thermal conductivity of nanoparticles and mass flow rates. The thermal conductivity of nanoparticles may be altered or changed by synthesizing the hybrid nanocomposite nanoparticles and it is expected that fluids prepared with hybrid nanoparticles may cause further heat transfer enhancements. The hybrid nanoparticles may be defined as two or more different materials in the nanometer size hybrid nanoparticles represent an area of nanotechnology, which is experiencing a marked growth due to its potential impact in material science and engineering. In this Present work, a solid model of a double pipe heat exchanger is built. The main objectives of this research are to analyze the thermal efficiency of hybrid nano fluid Cu Al2O3 Water relative to single nano fluid Al2O3 and pure water. For which nanofluid and hybrid nanofluid passes through the tube side with 6mm diameter, while the hot fluid flows through the annulus side with a 16mm inside diameter and length 1000mm. For this we considered hot water is supplied to the outer tube at a volume flow rate of 3.5 litre min at a temperature of 353 K, while Cu Al2O3 Water based hybrid nanofluid of 0.3 volume concentration are supplied to the inner tube at different volume flow rate of 0.2, 0.4, 0.6, 0.8 and 1 litre min at temperature of 301K. From the present study, it has been found that at 0.2, 0.4, 0.6, 0.8.and 1 liter per minute cold fluid flow rate and 3.5 liters per minute hot fluid flow rate the overall heat transfer coefficient is improved by 12 percent by the use of hybrid nano fluid Cu Al2O3 Water compared to single nano fluid Al2O3 . Prof. Om Prakash | Prabha Shankar Kumar Effects of Al2O3-Cu/Water Hybrid Nanofluid on Heat Transfer of Double Pipe Heat Exchanger using CFD Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30196.pdf Paper Url : https://www.ijtsrd.com/engineering/mechanical-engineering/30196/effects-of-al2o3-cuwater-hybrid-nanofluid-on-heat-transfer-of-double-pipe-heat-exchanger-using-cfd/prof-om-prakash

this article demonstrate Disadvantage of artificial intelligence to a different field as well as benefits of artificial intelligence. Research to verify thats artificial intelligence is beneficial if its having risks aspect then its also having advantage and it is safe. Influences virtual physiological state which guide behavior and learning, modulating the emotion that our artificial human feel and express. At the aspect of risks factor it may reach to the human level intelligence n may dominate to the human being. Seeta M. Chauhan Artificial Intelligence: Benefit and Risks Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30232.pdf Paper Url : https://www.ijtsrd.com/computer-science/artificial-intelligence/30232/artificial-intelligence-benefit-and-risks/seeta-m-chauhan

The Laplace transformation is a mathematical tool used in solving the differential equations. Laplace transformation makes it easier to solve the problem in engineering application and make differential equations simple to solve. In this paper, we will solve differential equations including Leguerre Polynomial via Laplace Transform Method. Dr. Dinesh Verma | Amit Pal Singh Solving Differential Equations Including Leguerre Polynomial via Laplace Transform Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30197.pdf Paper Url : https://www.ijtsrd.com/mathemetics/applied-mathematics/30197/solving-differential-equations-including-leguerre-polynomial-via-laplace-transform/dr-dinesh-verma

The brain is one of the most complex organ in the human body that works with billions of cells. A cerebral tumor occurs when there is an uncontrolled division of cells that form an abnormal group of cells around or within the brain. This cell group can affect the normal functioning of brain activity and can destroy healthy cells. Brain tumors are classified as benign or low grade Grade 1 and 2 and malignant tumors or high grade Grade 3 and 4 . The proposed methodology aims to differentiate between normal brain and tumor brain Benign or Melign . The proposed method in this paper is automated framework for differentiate between normal brain and tumor brain. Then our method is used to predict the diseases accurately. Then these methods are used to predict the disease is affected or not by using a comparison method. These methodology are validated by a comprehensive set of comparison against competing and well established image registration methods, by using real medical data sets and classic measures typically employed as a benchmark by the medical imaging community our proposed method is mostly used in medical field. It is used to easily detect the diseases. We demonstrate the accuracy and effectiveness of the preset framework throughout a comprehensive set of qualitative comparisons against several influential state of the art methods on various brain image databases. Sanmathi. R | Sujitha. K | Susmitha. G | Gnanasekaran. S Tumor Detection and Classification of MRI Brain Images using SVM and DNN Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30192.pdf Paper Url : https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/30192/tumor-detection-and-classification-of-mri-brain-images-using-svm-and-dnn/sanmathi-r

Social media is a platform for people to discuss their issues and opinions. Before knowing the aspects of social media people must have to know what is social media Social media are computer tools that allows people to share or exchange informations, ideas, images, videos and even more with each other through a particular network. In this paper we cover all aspects of social media with its positive and negative effect. it is projected that the future social media technology will increasingly result from virtually endless interactions of company company generated content and user user generated content. Competition and information clutter is also projected to increase substantially in the future. Therefore the companies will have to tap into the lucrative social media platforms in order to actively market to target consumers. This paper gives a brief definition of what media is and what are the effects of media on society. During the course of this literature various types of Impacts of media on the individual, his family and society are highlighted. D. Santhiya | W. Jeba Grace | S. Nandhini Impact of Social Media in Technological World Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30233.pdf Paper Url : https://www.ijtsrd.com/management/marketing/30233/impact-of-social-media-in-technological-world/d-santhiya

This article demonstrates the definition of Li Fi Light Fidelity , its different applications, Advantages, Disadvantages as well as Challenges which would be great for an upcoming generation under wireless technology. The research is based on the various factors, consequences and risk factors associated with the advent of this field. This also demonstrates the communication of worldwide speaks with VLC. Li Fi could be a wireless networking technology thats wont to transmitting data from one device to a different device. This research paper covers the applications of Li Fi and compare with existing technology like Wi Fi. Nisha Shelke | Dr. Anandhi Giri Design, Working, Challenges, Applications, Advantages and Disadvantages of Li-Fi in Wireless Networks Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30249.pdf Paper Url : https://www.ijtsrd.com/computer-science/computer-network/30249/design-working-challenges-applications-advantages-and-disadvantages-of-li-fi-in-wireless-networks/nisha-shelke

Stem cells have emerged to give a promising result in regenerative medicine. Stem cell derived growth have been studied in various animals. These stem cell are identified by specific markers. Various methods have been used to identify these markers. Some of the methods were been used last decades to identify the stem cells. This article presents a concise review on the methods used for identifying markers and discuss the very most reliable technique of the identification of stem cell markers. Dr. Sai Charan. K. V | Dr. Nirmal Famila Betty A Reliable Technique for Stem Cell Marker Identification Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30146.pdf Paper Url : https://www.ijtsrd.com/biological-science/cell-biology/30146/a-reliable-technique-for-stem-cell-marker-identification/dr-sai-charan-k-v

Protection of data privacy is a very crutial aspect considering the advent of technology in every Sphere of human life. It directly depends of how privacy is understood and the legal framework present behind that to protect ones privacy in the way it is meant to be understood. Data protection bill would let us understand the variety of rights and obligation when the question is about protection of ones privacy. At the same time, non invasion into the privacy of others is also quintessential. The research article would elucidate in detail the matter crux of Data protection bill considering the practical implications of the rules therein mentioned. The author would also deal with the suggestions would help, safeguarding the privacy at the very ground level. N Parmesh Data Protection Bill 2019: Participative Role of General Public Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30250.pdf Paper Url : https://www.ijtsrd.com/other-scientific-research-area/public-relations/30250/data-protection-bill-2019-participative-role-of-general-public/n-parmesh

Radio Frequency Identification RFID tags generally belong to a single domain system which is called has RFID single domain system. Till date, most of the researches in the RFID single domain system have been authentication protocol against a variety of attacks. This topic generally describes about the security and privacy mechanism in RFID multi domain which is further divided into three sub topics that is RFID forehand system security, RFID backhand system security and RFID inter domain system security. Pawankumar Tanavarappu A Security Framework in RFID Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30217.pdf Paper Url : https://www.ijtsrd.com/computer-science/computer-network/30217/a-security-framework-in-rfid/pawankumar-tanavarappu

WiMAX stands for Worldwide Interoperability for Microwave Access which is also called as IEEE 802.16, the WiMAX technology is basically a wireless broadband communications technology, and it is used to provide higher data rate with increased coverage area. It means that it is based on IEEE 802.16 standard, which provides high speed data over a wide area. This technology can operate Non LOS non line of site . WiMAX is considered as a technology for point to multipoint wireless networking. In this paper it cover about WiMAX, WiMAX feature, its Characteristics and Application and their architecture of WiMAX. Khushboo Kumari WiMAX Features, Characteristics and Application in Wireless Technology Computing Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30204.pdf Paper Url : https://www.ijtsrd.com/computer-science/computer-network/30204/wimax-features-characteristics-and-application-in-wireless-technology-computing/khushboo-kumari

English language teaching is becoming more popular throughout the world since English language got the place of a global language. Teaching English as a second language would be more interesting and easy if it is taught through the local colors of understanding. Literature is the best source to make language learning easy and fascinating. For the beginners of English language learner, there are large numbers of stories which can be taught in classrooms. Short stories, specifically children stories, short poems and novellas can be good source to arise interest among learners. Literary texts provide chance to come across different type of emotions, expressions and sentence structures. Literary language enables learners to differentiate between formal and informal language. Literary text can be taught through audios or by showing movies based on literary work with English subtitles which not only will improve their pronunciation and but also will help to improve their listening for English language. Reading literary text during language learning builds a rich vocabulary for a new learner.Learning language through literature also help the learner to know other cultures very closely, because literature of different languages provide with the platform of various cultural values, rules and regulations, and prepare the mind of readers to accept the differences between cultures and respect the values of others.This research will help the teachers and students as well which would be mainly focused over the students of English department only. This is an objective research a survey among the students would be done by the researcher itself, in which short text of different genres of literature would be given to be taught during language learning classes. The data of the research would be calculated by SPSS. Dr. Gulnaz Fatma | Shama Al Ajam Using Literature in Teaching English as a Second Language: A Case Study of Arda College Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30244.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/education/30244/using-literature-in-teaching-english-as-a-second-language-a-case-study-of-arda-college/dr-gulnaz-fatma

Modern African film cultures are receiving a new form of acceptability and audiences beyond the borders of Africa. This is illustrated by the growth, development and spread of the Nigerian and Ghanian film industries. While African audiences perceive them as Pan African, the development of film culture in Cameroon follows a different trajectory, with audience critiques of non representativeness of Cameroonian films. It is in this context that a Burkinabe film, Julie et Romeo, by Boubacar Diallo, itself an African adaptation of Shakespeares play, became one of the most well received films in Cameroon. Two factors accounted for this, the films aesthetic appeal and the directors engagement with his potential audience. I argue here that audience sensitivity is neglected in Cameroonian accounting for low reception of Cameroonian films. By analysing audience reception of Diallos film, I map out a strategy for audience engagement in the production and receptivity of Cameroonian films as a way of improving their aesthetics, quality and wider appeal. Tafor Ateh Visual Perception and Reception of Boubakar Diallos Julie et Roméo in Cameroon Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30248.pdf Paper Url : https://www.ijtsrd.com/other-scientific-research-area/other/30248/visual-perception-and-reception-of-boubakar-diallos-julie-et-rom%C3%A9o-in-cameroon/tafor-ateh

The major problem that the farmers around the world face is losses, because of pests, disease or a nutrient deficiency. They depend upon the information that they get from the agricultural departments for the diagnosis of plant leaf disease. This process is lengthy and complicated. Here comes a system to help farmers everywhere in the world by automatically detecting plant leaf diseases accurately and within no time. The proposed system is capable of identifying the disease of majorly 5 crops which are corn, sugarcane, wheat, and grape. In this paper, the proposed system uses the Mobile Net model, a type of CNN for classification of leaf disease. Several experiments are performed on the dataset to get the accurate output. This system ensures to give more accurate results than the previous systems. Shivani Machha | Nikita Jadhav | Himali Kasar | Prof. Sumita Chandak Crop Leaf Disease Diagnosis using Convolutional Neural Network Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd29952.pdf Paper Url : https://www.ijtsrd.com/engineering/information-technology/29952/crop-leaf-disease-diagnosis-using-convolutional-neural-network/shivani-machha

The organizational conflicts among employers and employees in tertiary institutions most especially public institutions has remained a recurring spike in Nigeria that undermine the overall performance of lecturers and students outcomes in the institutions. The specific objective of this research is to investigate the extent of significant differences in organizational justice among lecturers in public and private universities in relation to academic staff commitment in tertiary institutions in South South States in Nigeria which is also in line with the research question and hypothesis. The research adopted a descriptive survey research design, the population of the study is 400. Factorial analysis of variance was used to test hypothesis with the aid of Statistical Package for Social Sciences SPSS version 20. Cronbach alpha was used to test the reliability of the instrument. The findings revealed that there is level of significant differences in interactional justice in relations to lecturer students relationship between academic staff in public and private universities in South South Nigeria, in conclusion equitable distribution of resources, fair procedures for job decisions, with appropriate allocation of resources and fair communication of decisions will result in high academic staff performance towards higher academic excellence. The researcher recommends among others that management of both public and private universities should come out with supportive policies as a way of promoting interactional justice toward maintaining lecturer student relationship which can be done through integrating the philosophy of target education programme established in 1990 by Aumua and Drake 2002 . Musah Ishaq | Prof. Lilian O. Orogbu | Dr. Ndubuisi-Okolo Purity U. Organizational Justice and Academic Staff Performance among Public and Private Tertiary Institutions in South-South States of Nigeria Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30205.pdf Paper Url : https://www.ijtsrd.com/management/general-management/30205/organizational-justice-and-academic-staff-performance-among-public-and-private-tertiary-institutions-in-south-south-states-of-nigeria/musah-ishaq

In India most of the accidents are happening due to vehicles over speeding. Sometimes if obstacle is close to the vehicle then they wont be able to judge the distance to apply instant brakes and accident is occurred. To avoid accident due to over speeding, obstacle detection using ultrasonic sensors is used. In this project ultrasonic sensor is used for 360degree detection of obstacle. If obstacle is in front of the vehicle less than safety distance, automatically brakes will be applied or if vehicle comes from backside of the vehicle and is at less than safety distance then the warning light is shown to vehicle. Sometimes if vehicle is coming very close to our vehicle just before hit the vehicle the airbags are open. Rahul Bhatade | Pratiksha Gawai | Prof. Sandip Zade Accident Alert System using Advance Microcontroller Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30105.pdf Paper Url : https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/30105/accident-alert-system-using-advance-microcontroller/rahul-bhatade

This research assessed the barriers among practitioners proficiency in meeting the global needs in this digital age and industry 4.0. The researcher s utilized the descriptive method of research to gather the data needed in this study. The data revealed that refrigeration and air conditioning practitioners were moderately knowledgeable in terms the knowledge, skills and attitudes to safely install the main packaged type air conditioning unit PACU components and units as well as accessories based on manufacturers recommendations. Further, issues and concerns were identified, inclusion of HVAC R in the curriculum was the most addressed concerned. Thus, this implied that there is a need to revisit the RAC curriculum. Mateo A. Alin | Eugenio A. Ermac | Nolasco K. Malabago | Roberto L. Suson Refrigeration and Air Conditioning: Breaking Barriers among Practitioners Proficiency Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30272.pdf Paper Url : https://www.ijtsrd.com/other-scientific-research-area/other/30272/refrigeration-and-air-conditioning-breaking-barriers-among-practitioners-proficiency/mateo-a-alin"

In many communities around the world, newborn deaths are so common that children are not even named until they survive their first month of life. Children are an embodiment of our dreams and hopes for the future. For a nation to grow and progress, the well being and the health of the children is of crucial importance. Advances in medical research, the advent of new technologies have helped improve the healthcare of both well and sick newborn babies. Further innovation in baby care equipment have made the task of caring for babies much easier. Care practices immediately after delivery play a major role in causing neonatal morbidities and mortalities. Insufficient knowledge of parents regarding essential newborn care leads to decrease in the quality care. The investigators felt a real need to assess the mothers knowledge regarding essential newborn care. The objectives of the study were to assess the knowledge of postnatal mothers regarding essential newborn care and to develop a pamphlet on new born care. A descriptive study with non experimental research design was adopted. Sixty postnatal mothers admitted in postnatal ward of SGT hospital ,Gurugram were selected using convenient sampling technique from 16 04 to 22 04 2019. The tool used was structured questionnaire. The study findings revealed that majority 63.3 of the postnatal mothers had satisfactory knowledge scores and only 10 postnatal mothers had inadequate knowledge scores, whereas rest 26.6 of the subjects had inadequate knowledge regarding essential newborn care. A pamphlet regarding essential newborn care was disseminated to postnatal mothers. Ms. Sumyra Nazir | Ms. Monica | Mr. Mohit A Descriptive Study to Assess the Knowledge Regarding New Born Care among Postnatal Mothers with a View to Prepare a Pamphlet in SGT Hospital Gurugram Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30088.pdf Paper Url : https://www.ijtsrd.com/medicine/nursing/30088/a-descriptive-study-to-assess-the-knowledge-regarding-new-born-care-among-postnatal-mother%E2%80%99s-with-a-view-to-prepare-a-pamphlet-in-sgt-hospital-gurugram/ms-sumyra-nazir

Undesirable behavior is inevitable inside and outside the school premises. This research addresses the importance of classroom management as one of the important factor that prevents the occurrence of undesirable behavior of the learners. Based on the findings, the ideal classroom management practices lead and connect teachers and learners to meet the model desirable behavior inside and outside the school premises. Indicators include Establishing clear learning outcomes, behavior management and maximizing in giving praise to the learners. Classroom management has shown to be one of the most important factors that teachers need to consider before the school year. The data has shown that in dealing with students behavior, teacher must develop a strategy that not just only address a single behavior but a multi strategy that meet the needs of the learners. Judith N. Ubod Classroom Management: The Challenge of Change Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30273.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/education/30273/classroom-management-the-challenge-of-change/judith-n-ubod

Gesture based communication system is designed keeping in mind the communication needs of the people who are either bedridden or suffer from some kind of speech impairment. The main benefit of this system is that its not necessary for some other person to be present with the bedridden person always by providing message services. It is a microcontroller based system that uses buttons present on the glove to display on a screen and play a particular message through speaker that is already stored in the system and uses joystick to compose a message not present in the system and to send the same to a person not physically there. The person can also communicate with the disabled person through a software to ensure 2 way communication. In this way, this project will help to lower the communication gap between poorly abled and normal people. Heebatullah | Zarka Latief | Nazish Ara | Sumyra Jan | Bazila Nazir Gesture Based Communication System Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30230.pdf Paper Url : https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/30230/gesture-based-communication-system/heebatullah

This research work sets out to evaluate the spoken productions of foreign learners of English the case of students in the English Department of the University of Doba, i.e. students of Level One, who were 200 in number. To carry out the investigation, reading activity of a text was used to collect data. Variationism by Labov 1963 was the theory used to guide the analysis of data. The investigation arrived at the results that learners have very poor performance in the pronunciation of English sounds, which is due to the influence of French and lack of English practice. To improve the learning of EFL, students are recommended to practice English intensively and extensively. Ndikoua Ngaidandi | Michael Etuge Apuge Realization of the Grapheme er by Learners of English as Foreign Language: The Case Study of Level-One Students of English Department, University of Doba in Chad Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30274.pdf Paper Url : https://www.ijtsrd.com/other-scientific-research-area/other/30272/refrigeration-and-air-conditioning-breaking-barriers-among-practitioners-proficiency/mateo-a-alin

Here, we are monitoring, controlling and maintaining the chemical filling station by using DCS automation. Distributed control system is an embedded system which is a combination of hardware and software used for control operations. Each chemical has different method of packing. Some chemicals should be handled more carefully. Each and every chemical undergoes number of process one by one to obtain the resultant product. Here we are using sodium soap as chemical solids. This sodium soap is used in De inking process in paper industries for removing the ink from the recycling paper, where sodium soap is used in large amount in liquid form. Sodium soap are normally obtained in solid form, we have to undergo number of manual operations to convert it into liquid form which is quite complex and requires time and continuous monitoring. This manual operations are converted into automation by introducing DCS Distributed Control System. Mr. J. Asokan | S. Gobisha | T. Haritha | K. P. Thivyapriya Preparation and Control of Chemical Filling Station by using DCS Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30203.pdf Paper Url : https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/30203/preparation-and-control-of-chemical-filling-station-by-using-dcs/mr-j-asokan

Big data is an enormous data in size, collection of data that are enormous in size and can grow exponentially with time. It can be in three forms such as structured, unstructured and can be semi structured form. Big data have few characteristics which is v4 such as volume, variety, velocity and variability. Big data is use for better decision making, better viable capability and revised customer service. Big data deals with industries, to deal with the enormous data or amount of information. This paper has a detailed study of big data analytics based on challenges in IoT. Padmavati Chauhan Big Data Analytics Issues Based on Challenges in IoT Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30206.pdf Paper Url : https://www.ijtsrd.com/computer-science/other/30206/big-data-analytics-issues-based-on-challenges-in-iot/padmavati-chauhan

Cyber Stalking is a burgeoning concept where a person is vigiled by another using electronic media without consent. Using the pragmatic stealthiness of networking tactics, a stalker intrudes into the privacy of the victim causing him harm either coming in physical contact or by inflicting mental agony my the means of misusing the information collected online via stalking. The stalker may demand for money in exchange of sparing his her dignity or put across unreasonable demands such as to have intimate relationship with him. It can be noticed very often that a victim is left with no option other than to cater to the unreasonable demands. Such attacks have to be handled through either efficient enforcement agencies with adequate technical backing or through extremely stringent laws which would create fear in the minds of the offenders. Unfortunately the India is still in the phase of growth in the terms of its technical advancement which makes it pracitcally impossible to bring the offender before the Court of Justice. This research article deals with the concept of cyber stalking in detail. It also explains about the self regulatory user guidelines and the legal structure required to secure user data from illegal intrusions and embezzlements. N Parmesh Increasing Vulnerability of the user Data at Cyberspace Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30251.pdf Paper Url : https://www.ijtsrd.com/other-scientific-research-area/other/30251/increasing-vulnerability-of-the-user-data-at-cyberspace/n-parmesh

The global banking reform agenda made further progress in 2017 18, the Reserve Bank of India ushered in a revised framework with the insolvency and bankruptcy code as the focal point in pursuit of declogging of banks balance sheets from overhang of stressed assets. Going forward, issues such as recapitalization, improvement in banks corporate governance, implementation of Ind AS and containment of cybersecurity risks may assume prominence. Indian banks will continue to face deterioration in their non performing assets NPAs or bad loans due to the current economic conditions in the current fiscal year 2019 20 . The gross non performing assets GNPAs plus restructured standard advances in the banking system remained elevated at 12.1 percent of gross advances at end March 2018. Going forward, the stress tests carried out by the Reserve Bank suggest that under the baseline assumption of the current economic situation prevailing, the GNPA ratio of scheduled commercial banks SCBs may increase further in 2018 19. The aggregate gross NPAs of SCBs increased primarily as a result of this transparent recognition of stressed assets as NPAs, from Rs 3,23,464 Crore, as on March 31, 2015, to Rs 10,35,528 crore, as on March 31, 2018. Dr. S. Gautami | Dr. Nalla Bala Kalyan Stressed Assets Effect on Post Merger Scheduled Commercial Banks in India Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30234.pdf Paper Url : https://www.ijtsrd.com/management/equality-diversity-and-inclusion/30234/stressed-assets-effect-on-post-merger-scheduled-commercial-banks-in-india/dr-s-gautami

Employee welfare means anything done for the comfort and improvement of the employee. The Employers offer an extra incentive in from of employee welfare is to enrich the life of employee and keep them happy. The working environment in a factory adversely affects the working health. In some of the factory may lead to the employee health condition worst so the work of employee may get into trouble and the health problems will be there so that the welfare measures should be given for their health and the life. The factors of the welfare are safety helmet at the workplace, first aid box for the emergency in case of any injuries to the employee while doing the work, most wanted in our daily life is food and water so that should be provided, in case the employee at different place come and work for them shelter should be given, some employees may suffer from the ventilation so the factory should have that facility. In this paper we are going see whether the employee gets their welfare correctly and whether they are satisfied with their need and wants if not we will suggest them with some ideas. Dr. M. Robinson | S. Chitra Employee Welfare in Manufacturing-Industry Literature Review Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30173.pdf Paper Url : https://www.ijtsrd.com/management/other/30173/employee-welfare-in-manufacturing%E2%80%93industry-literature-review/dr-m-robinson

The main objective of our project is to purify the waste water from the deinking process. Fresh water is nothing but water with less than 500 parts per million of dissolved salts. The industrial waste water treatment is to remove pollutants, remove toxicants, neutralize coarse particles, kill pathogens so that quality of discharged water is improved. In this condition the deinking agent is used to separate and remove the ink from pulp. Ink can be removed through a method called as flotation, in which the ink is first changed into fine particles that are then dispersed. In our project Back flushing filter Auto filter RF3 is used to filter the dust particles from the waste water. Through this deinking process the fresh water get polluted, with the help of primary and secondary treatment the maximum percentage of water is get purified. Rubini. T | Sughi. S | Dr. R. Mohana Priya | Mrs. N. Sudha Fresh Water Reclamation in De-Inking Process using Distributed Control System Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30183.pdf Paper Url : https://www.ijtsrd.com/other-scientific-research-area/enviormental-science/30183/fresh-water-reclamation-in-de-inking-process-using-distributed-control-system/rubini-t

In the recent years, the scarcity of water is one of the major important problems for human needs and other living things. In the existing has the inaccurate output. The advanced system overcomes the existing system. This system uses the automatically manages the waste water without waste. The system uses the Internet of things IoT for waste water management in smart cities. It also uses the sensors for sensing the waste water and also the data is transmitted to the mobile app or web application through IOT using cloud. The PH sensor is used to separate the water for the specified purpose like agriculture and other sources. This technology is used to remove the contamination from the waste water. Badusha. S | Gopikannan. S | Janarthanan. S | Gnanasekaran. S Waste Water Management for Smart City Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30231.pdf Paper Url : https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/30231/waste-water-management-for-smart-city/badusha-s

This study proposes Artificial Intelligence AI based path loss prediction models for the suburban areas of Abuja, Nigeria. The AI based models were created on the bases of two deep learning networks, namely the Adaptive Neuro Fuzzy Inference System ANFIS and the Generalized Radial Basis Function Neural network RBF NN . These prediction models were created, trained, validated and tested for path loss prediction using path loss data recorded at 1800MHz from multiple Base Transceiver Stations BTSs distributed across the areas under investigation. Results indicate that the ANFIS and RBF NN based models with Root Mean Squared Error RMSE values of 5.30dB and 5.31dB respectively, offer greater prediction accuracy over the widely used empirical COST 231 Hata, which has an RMSE of 8.18dB. Deme C. Abraham An Artificial Intelligence Approach to Ultra-High Frequency Path Loss Modelling of the Suburban Areas of Abuja, Nigeria Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30227.pdf Paper Url : https://www.ijtsrd.com/computer-science/artificial-intelligence/30227/an-artificial-intelligence-approach-to-ultra-high-frequency-path-loss-modelling-of-the-suburban-areas-of-abuja-nigeria/deme-c-abraham

"This study proposes Artificial Neural Network ANN based field strength prediction models for the rural areas of Abuja, the federal capital territory of Nigeria. The ANN based models were created on bases of the Generalized Regression Neural network GRNN and the Multi Layer Perceptron Neural Network MLP NN . These networks were created, trained and tested for field strength prediction using received power data recorded at 900MHz from multiple Base Transceiver Stations BTSs distributed across the rural areas. Results indicate that the GRNN and MLP NN based models with Root Mean Squared Error RMSE values of 4.78dBm and 5.56dBm respectively, offer significant improvement over the empirical Hata Okumura counterpart, which overestimates the signal strength by an RMSE value of 20.17dBm. Deme C. Abraham Mobile Network Coverage Determination at 900MHz for Abuja Rural Areas using Artificial Neural Networks Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30228.pdf Paper Url : https://www.ijtsrd.com/computer-science/artificial-intelligence/30228/mobile-network-coverage-determination-at-900mhz-for-abuja-rural-areas-using-artificial-neural-networks/deme-c-abraham"

The World Health Organization WHO defines Child Sexual Abuse CSA as the involvement of a child in sexual activity that he or she does not fully comprehend, is unable to give informed consent to, or for which the child is not developmentally prepared and cannot give consent, or that violates the laws or social taboos of society. . . Millions of youngsters square measure victims of violence and exploitation. Theyre physically and showing emotion vulnerable and that they may be scarred forever by mental or emotional abuse. we all know what to try and do, and that we knowledge to try and do it. Dr. Naveen Singh Chouhan Child Sexual Abuse in India: Current Issues Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30282.pdf Paper Url : https://www.ijtsrd.com/management/law-and-management/30282/child-sexual-abuse-in-india-current-issues/dr-naveen-singh-chouhan

Agriculture is very important in everyday day life. Without agriculture we cannot satisfy our daily needs such as food. The process of developing the agriculture is very difficult as it depends on season, rainfall, water, soil, humidity etc. Rainfall is the important factor among this. Due to the changes of the season the rainfall is not constant, due to the lack of rainfall the farming land becomes dry and the irrigation of crops is very difficult for the farmers. This is the major problem in the agriculture. To overcome this in olden days the farmers used variety of irrigation systems for better crop production. Irrigation is nothing but watering the crops in cultivating land. The irrigations such as drip irrigation, springler irrigation, surface, subsurface irrigation are commonly used in many countries. These irrigation can perform a different characteristics and functions for a better crop production. Drip irrigation method was used in Israel by using the tubes and pipes. The springler irrigation method was used in Australia. These two irrigation system are now commonly used in India. In this irrigation the drop of water is send to crops but the water is insufficient and crops does not grow faster. Here we propose a new method of irrigation called center pivot irrigation system. The system is constructed in the center of farmland. It consists of sprinkler at the top and it sprinkles the water uniformly to all the crops. The crops get enough water and yield in a good manner. By using this method there is no water loss. M. Anusudha | B. Banupriya | A. Godhawari | Mr. J. Asokan Real Time Monitoring of Self Propelled Center Pivot Irrigation System using Microcontroller Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30191.pdf Paper Url : https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/30191/real-time-monitoring-of-self-propelled-center-pivot-irrigation-system-using-microcontroller/m-anusudha

Lumbar spinal fusion is advance method of surgery to permanently join or fuse two or more vertebrae in the human spine in order to eliminate the relative motion between them. It is currently considered as the most successful surgery in the patients with spinal deformity and degenerative spondylolisthesis. Its success critically depends on the geometric design of the interbody cages and the material properties of the material used. The main objective of this work is to design analyse and develop a 3D model of the intervertebrae disc for human lumbar spine based on anatomical reverse engineering techniques ARE techniques such as magnetic resonance imaging MRI scan. For this purpose, the sizes of L4 L5 which are the largest vertebrae of the human spine, were observed and modeled accordingly by using CREO with standard dimensions. The prototype was made with PLA plastic using an FDM 3D printer. The analytical tests were carried on ANSYS by applying various complex motions on the intervertebrae disc surface and the stress distributions were compared for the optimization of lumbar cage design. The compression force was applied on the prototype and observed till failure. Results obtained were compared for static position of the lumbar cage, of both analytical and physical outcomes. T. Venkataramana | E. Srinath Reddy | E. Pavan Kumar | B. Chenna Keshavulu Design Evaluation and Development of Lumbar Cage Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30136.pdf Paper Url : https://www.ijtsrd.com/engineering/mechanical-engineering/30136/design-evaluation-and-development-of-lumbar-cage/t-venkataramana

The main objective of this project to dispose the reject material properly and reduce the environmental impacts. This is a Deinking process DIP . Deinking process is the one in which the ink from the office waste and newspaper and removed in order to prevent it from dispersion into the pulp sodium soap is used for removing the ink. The sodium soap produced in conveyer. The existing method have only one conveyer. It carries the reject material and it create the environmental hazards. But our proposed method has two conveyers. These conveyers are worked with the help of DCS. It reduces the environmental pollution and reduce the need for more manual labor. The conveyer 1 has a magnetic separator which separate the metal, iron and its components. The conveyer 2 has a reject material like polythene and reject material. Those materials are conveyed Baling machine by using the conveyer 2. Finally, all the reject materials are bundled by using the baling machine. Abi. R | Gayathri. C | Gowsalya. K | Mr. Ravishankar Kandasamy | Mrs. Sudha. N Automation of Waste Paper Reject Handling System using DCS Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30160.pdf Paper Url : https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/30160/automation-of-waste-paper-reject-handling-system-using-dcs/abi-r

Identity based encryption IBE is a very attractive cryptographic primitive due to its unnecessity of any certificate managements. Nevertheless, the user revocation problem in IBE remains an elusive research problem and hence, it is an important research topic. One possible approach in achieving revocations is to update users decryption keys. However, to avoid the need of secret channels, public time keys need to be issued to allow this update to occur. It is unfortunate that this method often suffers from two problems 1 the user has to maintain linearly growing decryption keys and 2 the revoked users can still access ciphertexts prior to revocation. At the first glance, proxy re encryption technique may provide a solution to this problem, but the ciphertexts will become longer after each re encryption, which makes it impractical. In this paper, we present a revocable identity based encryption scheme with cloud aided ciphertext evolution. Our construction solves the two aforementioned problems via ciphertext evolution implemented by the cloud. Additionally, the size of ciphertexts in the cloud remains constant size regardless of evolutions. The scheme is provably secure against chosen ciphertext attacks based on the BDH problem. The comparisons with the existing related works show that our scheme enjoys better efficiency, thus is practical for the data sharing in cloud storage. K. Kalaivani Efficient and Enhanced Proxy Re-Encryption Algorithm for Skyline Queries Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30294.pdf Paper Url : https://www.ijtsrd.com/engineering/computer-engineering/30294/efficient-and-enhanced-proxy-re-encryption-algorithm-for-skyline-queries/k-kalaivani

This article examines the link between child abuse and security challenges in Nigeria. General strain theory and social bond theory were, adopted as the theoretical frame of the study. While the former explains how blocked opportunities among the lower class youths lead to delinquency, and consequently, to insecurity in the society, the latter explains how weakened bond to conventional social institutions reduces social control of young persons, and subsequently, leading to insecurity in the society. Thus, abuse of children will have a long term effect and elicit deprivation that can later be, expressed through delinquency or crime. The article principally relied on secondary data. The article concludes that child abuse has many social and psychological consequences and they are associated to security challenges in Nigeria. As differently indicated by the data cited in this article, most of the city hooligans, members of urban gangs, Boko Haram and other forms of criminal gangs are largely from lower classes and majority have in one way or the other experienced child abuse and neglect. To overcome the menace of child abuse in Nigeria and by implication the insecurity, the article recommended that the Government, NGOs, community members and families should provide means for child protection, poverty reduction, and creation of awareness, etc. Ahmad S. Abdullahi | Zaitun Sunusi Bakabe Child Abuse and Security Challenges in Nigeria Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30349.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/social-science/30349/child-abuse-and-security-challenges-in-nigeria/ahmad-s-abdullahi

This paper focuses on the problems and challenges during self driving. In the modern era, technologies are getting advanced day by day. The field of smart city has introduced a new technology called Autonomous Driving. Autonomous driving can be defined as Self Driving, Automated Vehicle. Google has started working on this type of system since 2010 and still in the phase of making changes in this technology to take it to a higher level. Any technology can reach up to an advanced level but it cannot provide a full fledged result. This paper facilitates the researchers to understand the problems, challenges and issues related to this technology. Shweta S. Darekar | Dr. Anandhi Giri Problems in Autonomous Driving System of Smart Cities in IoT Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30079.pdf Paper Url : https://www.ijtsrd.com/computer-science/other/30079/problems-in-autonomous-driving-system-of-smart-cities-in-iot/shweta-s-darekar

Public infrastructure plays a prominent role in any economy. Among them, road construction and their maintenance is very crucial for the local government within their jurisdiction. A study says that nearly 30.98 is spent by the local government as capital expenditure. This study is to describe various techniques that the local government bodies use, for the implementation of capital budgeting. This study also describes the various packages that can be used for the calculation of techniques of the capital budgeting. Akhileshwari Asamani Capital Budgeting in Local Government Bodies in India Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30189.pdf Paper Url : https://www.ijtsrd.com/management/accounting-and-finance/30189/capital-budgeting-in-local-government-bodies-in-india/akhileshwari-asamani

According to the Vedic tradition and culture, yajña literally means sacrifice, devotion, worship, offering etc. In the various scriptures of the Vedic literature, the Vedic sacrifices are described in detail. From the ancient Vedic times the five daily observances or sacrifices were prescribed as the Pañcamahayajñas. The combinations of five great sacrifices are called here the Pañcamahayajñas pañcanam mahayajñanam samahara pañcamahayajñam . The Satapatha Brahma a and Taittiriyara yaka mention about the Pañcamahayajñas at length while these five great yajñas take a very important place in the G hyasutras and the Dharmasutras. These five great sacrifices should be performed daily by householders which have some importance of the Indian cultural heritage as well as the Vedic traditions. They are viz., the Brahmayajña, i.e. the worship of Brahman or knowledge the Devayajña, i.e. the worship of gods the Bhutayajña, i.e. the worship of other beings the Pit yajña, i.e. the worship to ones forefathers the Manu yayajña, i.e. the worship to fellow humans. These above five daily sacrifices are performed very easily by the householders, i.e. Brahmayajña is done by the daily recitation of the Vedic texts, Devayajña is by offering the oblation to gods through Agni Bhutayajña is by giving food and other needful things to the animals, birds, insects etc. Pit yajña is by offering rice pi am or water to the forefathers Manu yayajña is by serving or helping other human being. The performances of these great Pañcamahayajñas have signified the value and ethics of humanity during the Vedic civilization, which are still relevant in the modern society. This research paper is a general study about to know the significance of the five great Vedic sacrifices and their relevance in the modern society and a comprehensive description has been aimed at. Nayana Goswami The Pañcamahāyajñas - A General Study Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30224.pdf Paper Url : https://www.ijtsrd.com/humanities-and-the-arts/sanskrit/30224/the-pa%C3%B1camah%C4%81yaj%C3%B1as-%E2%80%93-a-general-study/nayana-goswami"

The management of working capital involves managing inventories, accounts receivable and payable, and cash. Based on this assertion, this dissertation is to examine working capital management and the financial performance of basic materials manufacturing companies in Nigeria. The objective of the study is to examine the relationship between working capital management and financial performance of basic material manufacturing companies in Nigeria, The study is anchored with Fishers separation theory. The study used ex post facto research design which also known as after the effect research, data analyses of financial information were extracted from the manufacturing companies Financial Statements for the years 2001 to 2015. These statements used to examine how an independent variable, present prior to the study, affects a dependent variable. In order to arrive at the testable conclusion, stratified random sampling techniques were adopted. Ordinary Least Square OLS regression model were used in this research work with the model findings, which revealed that debtors, creditors and inventory has no significant relationship with return on investment of manufacturing companies in Nigeria. The study therefore recommended that managers of basic material manufacturing companies in Nigeria should intensify effort on how to improve the management of debtor as a component of working capital components than creditors and inventories in their industry. Olaniyi, Ayo R | Nzewi, Ugochukwu C Working Capital Management and the Financial Performance of Basic Materials Manufacturing Companies in Nigeria Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30225.pdf Paper Url : https://www.ijtsrd.com/management/accounting-and-finance/30225/working-capital-management-and-the-financial-performance-of-basic-materials-manufacturing-companies-in-nigeria/olaniyi-ayo-r

Combining data from several information sources has become a significant research area in classification by several scientific applications. Many of the recent work make use of kernels or graphs in order to combine varied categories of features, which normally presume one weight for one category of features. These algorithms dont consider the correlation of graph structure between multiple views, and the clustering results highly based on the value of predefined affinity graphs. Artificial Bee Colony is combined to Multi view Clustering ABC MVC model in order to combine each and every one of features and learn the weight for each feature with respect to each cluster separately by new joint structured sparsity inducing norms. It also solves the issue of MVC by seamlessly combining the graph structures of varied views in order to completely make use of the geometric property of underlying data structure. ABC MVC model is based on the presumption with the purpose of intrinsic underlying graph structure would assign related connected part in each graph toward the similar group. Implementation results shows that the proposed ABC MVC model gets improved clustering accuracy than the other conventional methods such as Graph Structure Fusion GSF and Multiview Clustering with Graph Learning MVGL . The results are implemented to Caltech 101 and Columbia Object Image Library COIL 20 with respect to clustering accuracy ACC , Normalized Mutual Information NMI , and Adjusted Rand Index ARI N. Kamalraj Artificial Bee Colony Based Multiview Clustering (ABC-MVC) for Graph Structure Fusion in Benchmark Datasets Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30170.pdf Paper Url : https://www.ijtsrd.com/computer-science/data-miining/30170/artificial-bee-colony-based-multiview-clustering-abc-mvc-for-graph-structure-fusion-in-benchmark-datasets/n-kamalraj

An increasing number of non steroidal anti inflammatory drugs NSAIDs is available for clinical use each year. This article reviews significant differences between NSAIDs currently available in worldwide, and helps the clinician to evaluate new NSAIDs. While their mechanism of action and efficacy are similar, side effects and cost vary considerably from one agent to another. Because all NSAIDs can produce adverse effects, patients, especially if they are elderly, should be selected carefully for treatment with a particular agent. Sachin Korde | Jugal Vyas A Comprehensive Review on Clinical Pharmacology of Non-Steroidal Anti-Inflammatory Drugs Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30018.pdf Paper Url : https://www.ijtsrd.com/pharmacy/pharmacology-/30018/a-comprehensive-review-on-clinical-pharmacology-of-non-steroidal-anti-inflammatory-drugs/sachin-korde

This paper focuses on the examine how the Vietnamese leather and footwear industry can develop in order to become a strong competitor on the global market. From the concepts we developed a conceptual model which will guide us through the research. The uncompetitive national environment of an export industry will have a bad influence on the performance of the firms and lead to export barriers. Firms can overcome these barriers by learning from global buyers. Knowledge transfer from the global buyer to the local firms will only occur if there is a good relationship between the two. When firms succeed to overcome their export barriers they have achieved upgrading. Dr. Le Nguyen Doan Khoi Upgrading Vietnam Leather and Footwear Industry Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30201.pdf Paper Url : https://www.ijtsrd.com/management/business-economics/30201/upgrading-vietnam-leather-and-footwear-industry/dr-le-nguyen-doan-khoi

This study is anchored on uncovering the relevance of motivation in the relationship to management of human resource, unprogram fits snuggly without it and no company achieves its mission without influencing ones means. Utimate aim of motivation is often toward arouse individuals to bring out member of staff courageous diligence into achieving organization goals with enthusiasm and productivity. Particularly, this research look at the motivation for effective and as well as efficient service provision. The study emphasized on the relevance of motivation as a crucial determining factor for performance of employees within a corporate entity either public or private. The study adopted a expressive research survey which served as its blueprint, upon which the empirical investigation was done. The population size of this particular study underpins a number of mid level employees in Unilever Nigeria PLC, who are about one hundred 100 . A total number of sixty 60 considered selected from this population using stratified sampling technique and data was generated using questionnaires. Data was analyzed electronically with the aid of the social science statistical kit, on which the three hypotheses were tested through Correlation and Variance Analysis. The results of the findings showed that motivation justified having an effect on employee productivity despite its association with organizational efficiency and employee turnover. This study affirmed that human management skills and creativity maybe enhance when employees personal freedom encouraged, moment as well as other significant resources needed. Sabitu Olalekan Owotutu Effect of Motivation on Employee Performance in Unilever Nigeria PLC, Agbara Ogun State Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30163.pdf Paper Url : https://www.ijtsrd.com/management/business-administration/30163/effect-of-motivation-on-employee-performance-in-unilever-nigeria-plc-agbara-ogun-state/sabitu-olalekan-owotutu